I had the old fireball AARMS with 3/2 off set. Worked really well. But i just put up a video of my new Fireball AARMS. The new AARMS are wider than the older version. So I will be buying 4/1 off set. I kinda had a feeling because before I took the bike down for powdercoat, I measured the tie rods, and they were 1.5 inch longer.
I have the exact same wheel / tire setup on my '17 raptor 700 and a absolutely happy with them. I run them at 4 pounds front and rear and they bite really well in the soil and in the sane we have down ere in Florida.
When you are watching a video on youtube and all of a sudden the guy says your name X-D thanks for the shout out. Looking good, glad you did not have to add the washers. Perhaps that professional young assistant you had helping you was more experienced than the tech who did mine
Haha, you're welcome man. We chatted about them on FB messenger if you remember, My name is Aaron. I'm sure your subscriber count will massively climb from just my mere mention of your name..lol with my sub 300 subscriber count FTW...lol #demonitized Luckily this isn't my only channel. Thanks UA-cam!
I've had the same setup on my raptor 700 for about 2 years I had issues with the bolts being too long but other than that tires and rims are working great
A lil something I found the fixed my front end push, swap sides on the front. On my trx450r, it was pushing bad. After doing some research, running the front "backwards" increases braking and cornering grip and running "forward" increases straight line stability.
my ball joints ride extremely close on the banshee also with my +2s. interested to hear how you like the fronts once you lower the pressure. I have been running the ITP GNCCs up front and have yet to try the GBC XCs up front.
I don't think they are. I went from running Hyper beadlocks with ITP holeshots to these and didn't notice much difference. Banshee has no problem turning them over and the quad still feels light, admittedly compared to my 700R so take that with a grain of salt.
the offset on them front wheels to me looks like 4+1 ? you can also get 3+2 offset for them alba wheels that will move the wheel 1 inch away from the a-arms if it is 4+1 offset.
Evol ATV yeah I would rather not use the bead on glue if it's not necessary. All my friends say I should just in case but I'm thinking about what a mess the next tire change is going to be like.
I put WD40 on the rim and the bead, add air and pop pop. all seated. They say don't inflate to over 30 PSI but I had to do more. probably 40-50. Make sure the valve core is out so it can immediately deflate once its seated.
I'm pleased with them, I put them on my Raptor so they have gotten plenty of ride time on them. They are holding up fine, no leaks etc. I even changed out the rings and no issues at all.
Did you add washers to the supplied bead lock hardware for clearance with the wheel, looks sharp, perfect color match as well👍 loving the kids wrenching, very cool Here’s a link to a Yamaha for your viewing, looking at the same wheel kit you have on the shee ua-cam.com/video/cSGfdDULfjE/v-deo.html
Evol ATV Thanks for the kind words, the same can be said about your machines(SSIIICCCKK), who lotta love right there. Appreciate the response on the hardware for the Alba Bead-lockers as well, I read that the bolts ran a bit long, good to know yours went together perfectly 👍 Thanks again
@@markhitchcock459 for the record, the set I have on my Albas have been sitting unused. I put ITPs back on my Banshee. I have been running GBCs on my Raptor with Douglas wheels with no issue. Not sure how a wheel would chew them up faster though unless there were balance issues. My biggest issue with the Albas is the weight.
I had the old fireball AARMS with 3/2 off set. Worked really well.
But i just put up a video of my new Fireball AARMS. The new AARMS are wider than the older version. So I will be buying 4/1 off set. I kinda had a feeling because before I took the bike down for powdercoat, I measured the tie rods, and they were 1.5 inch longer.
I have the exact same wheel / tire setup on my '17 raptor 700 and a absolutely happy with them. I run them at 4 pounds front and rear and they bite really well in the soil and in the sane we have down ere in Florida.
When you are watching a video on youtube and all of a sudden the guy says your name X-D thanks for the shout out. Looking good, glad you did not have to add the washers. Perhaps that professional young assistant you had helping you was more experienced than the tech who did mine
Haha, you're welcome man. We chatted about them on FB messenger if you remember, My name is Aaron. I'm sure your subscriber count will massively climb from just my mere mention of your name..lol with my sub 300 subscriber count FTW...lol #demonitized Luckily this isn't my only channel. Thanks UA-cam!
those beadlocks looked amazing on the banshee
I've had the same setup on my raptor 700 for about 2 years I had issues with the bolts being too long but other than that tires and rims are working great
A lil something I found the fixed my front end push, swap sides on the front. On my trx450r, it was pushing bad. After doing some research, running the front "backwards" increases braking and cornering grip and running "forward" increases straight line stability.
thanks for the tip! I'll try that out.
my ball joints ride extremely close on the banshee also with my +2s. interested to hear how you like the fronts once you lower the pressure. I have been running the ITP GNCCs up front and have yet to try the GBC XCs up front.
I just bought 22 rears for my 2006 raptor and 23 inch for the front. Im putting them on stock rims
Will sunf street tires fit those ? 20×10×9 rear and 21×7×10 front
Ahh I took it out riding yesterday...cuts to the clip of him going 70mph😂😂😂
Hy... What tire size do you have on the banshee? Rear and front👍🏻
not on there anymore, but in this video they are 20x11x9 in the rear and 21x7x10 in the front
Any vibration issues when you get up on the roadway at speed?
Are the Alba fasteners stainless or zinc plated?
Thanks in advance
Where did you buy the tires from?
From an eBay seller.
I love the gbc tires but I have a stock banshee, wondering if they are too heavy since they are 6 ply as opposed to my stick 4ply tires.?
I don't think they are. I went from running Hyper beadlocks with ITP holeshots to these and didn't notice much difference. Banshee has no problem turning them over and the quad still feels light, admittedly compared to my 700R so take that with a grain of salt.
@@EvolATV Ok thanks. They look good on the Banshee for sure!
the offset on them front wheels to me looks like 4+1 ? you can also get 3+2 offset for them alba wheels that will move the wheel 1 inch away from the a-arms if it is 4+1 offset.
thank you, im def going to look into that
Nice vid. Did you use bead glue at all? Are there any air leaks?
I bought some thinking I would need it, but so far so good. Still holding air just fine.
Evol ATV yeah I would rather not use the bead on glue if it's not necessary. All my friends say I should just in case but I'm thinking about what a mess the next tire change is going to be like.
Meant to say what m I doing wrong,lol
I can't my tires to seat there bead on the rear, what m I find ring. Same tires same rims
I put WD40 on the rim and the bead, add air and pop pop. all seated. They say don't inflate to over 30 PSI but I had to do more. probably 40-50. Make sure the valve core is out so it can immediately deflate once its seated.
@@EvolATV I know I tried that but it just won't pop
@@johnbruzzi4381 probably better take it by an ATV shop then.
So how are the Alba wheels holding up? Are they worth it. Just a trail rider not a racer.
I'm pleased with them, I put them on my Raptor so they have gotten plenty of ride time on them. They are holding up fine, no leaks etc. I even changed out the rings and no issues at all.
Are the GBC tires and Alba wheels worth buying? Please reply, thank you.
SVTsupercharged I’m really pleased so far. Good investment.
Evol Villain RC sweet thank you for the reply, I’ll be ordering them today!
Does the offset or anything change. I’m thinking I want it close to stock idk...
Did you add washers to the supplied bead lock hardware for clearance with the wheel, looks sharp, perfect color match as well👍 loving the kids wrenching, very cool
Here’s a link to a Yamaha for your viewing, looking at the same wheel kit you have on the shee
ua-cam.com/video/cSGfdDULfjE/v-deo.html
that thing is siiiick! I didnt have to add any washers on the beadlock rings, everything was the perfect length.
Evol ATV
Thanks for the kind words, the same can be said about your machines(SSIIICCCKK), who lotta love right there. Appreciate the response on the hardware for the Alba Bead-lockers as well, I read that the bolts ran a bit long, good to know yours went together perfectly 👍
Thanks again
Rims are Junk
what size are the gbc raptor rears? not sure if i missed that part or not.
20x11x9 I believe
Evol ATV That’s what I figured. They’re all out of stock right now can only get 22s
How did the tires hold up?
great!
@@EvolATV another channel on Here said alba wheels with those tires chewed the tires up fast
@@markhitchcock459 for the record, the set I have on my Albas have been sitting unused. I put ITPs back on my Banshee. I have been running GBCs on my Raptor with Douglas wheels with no issue. Not sure how a wheel would chew them up faster though unless there were balance issues. My biggest issue with the Albas is the weight.