They're slow. I have a civvy and my buddy has an interceptor. Both completely stock, his car is barely faster. They weigh 4100 pounds. Love the car though
I had a friend down South when I lived in Georgia. He had a four-door Fairmont. It had a 501 Stroker motor in it. The frame was twisted every time he would come off the line, the trunk would pop open.
A manual swap and a coyotes engine in a crown vic makes sense bc the vic are very durable and can take s beating. Im considering getting one for a cut up car.
Love it. Coyote swap seems kinda straight forward from what ive read, but how was the manual swap? Im leaning towards a built t3650 as there are kits for the 3650 already. Dope car man.
@@davidpelton_heathenvic cool. Ive done a bit of wrenchin. Never done any swaps like that tho. Looking for the next build as my channel grows. Appreciate the reply, cool channel. I subbed
Inspiration definitely 2010 p71. Uhm I want 5.0 Engine buuuuut Me No Want manual. 6 speed Automatic will Sufffice Preferably 10 Speed Lol. But No Seriously How Extensive really Is The Motor Swapping Itself Ig I May Ask.
I have a 03 P71 I am looking at 5.0 swapping with a t-56. I am saving to start getting parts. Your car looks and runs great bro. Thanx for the content.
If I want to tackle a coyote swap on my 03 crown Vic but keep auto what transmission would work with a gen 2 or gen 3 coyote? I’ve heard I’d have to make custom mounts but it should work?
What suspension are you on? Nobody makes anything for the Town Cars but I figured since they're the same platform parts would be interchangeable suspension wise, so if you've got deats on that suspension setup lemme know bout it 👀
I looked thru the comments and I’m sure you covered it but may I ask what year Gt500 wheels those are? I wanted some from an 09ish Gt500 for my 08 p71 till I saw these babies. Gorgeous car btw!!
I'd be surprised if it was much lower than 18. I get 19-20 on my 9.5 mile commute, doing about 35 most of the way with a lot of stoplights. Coyotes are more efficient than the 2v 4.6, plus if you used the 6R or 10R80 it could only get better.
@@MrSonic731 it's not 3:55, its 2:73 or whatever the stock gears are. If I do the coyote swap I'd probably go to 3:15s otherwise it may have trouble sticking in those 1st and 2nd gears.
@davidpelton_heathenvic do what you like, I know I pissed a lot of people off because I crown vic swap a 1985 chevy C10 truck...lmfao, my goal is to coyote swap it, when I can find a good one. every one was doing crown vic swap F100 , not me 85 chevy C10 truck...lol
When you want a 5.0 mustang but need 4 doors, i guess this works
crew cab mustang
Who tf "WANTS" this is here is p71 territory son 🤣
Man Crown Vic’s are still slept on. Especially with that coyote.
They're slow. I have a civvy and my buddy has an interceptor. Both completely stock, his car is barely faster. They weigh 4100 pounds. Love the car though
@@MF-rtard89 truth be told that’s why they are slept on, they come stock with like 260hp 😭
That 5.0 sounds heavenly
Coolest Crown Vic I've ever seen.... Awesome job bro!
I had a friend down South when I lived in Georgia. He had a four-door Fairmont. It had a 501 Stroker motor in it. The frame was twisted every time he would come off the line, the trunk would pop open.
A manual swap and a coyotes engine in a crown vic makes sense bc the vic are very durable and can take s beating. Im considering getting one for a cut up car.
If the filter was clamped it would’ve been an extra 100+ horsepower
Pretty awesome. Now I'm looking at what it would cost me to do
Love it. Coyote swap seems kinda straight forward from what ive read, but how was the manual swap? Im leaning towards a built t3650 as there are kits for the 3650 already. Dope car man.
The manual swap is super simple if you've done alot of wrenchin. And for sure go with a 3650. I've been beating on this one for 5 years
@@davidpelton_heathenvic cool. Ive done a bit of wrenchin. Never done any swaps like that tho. Looking for the next build as my channel grows. Appreciate the reply, cool channel. I subbed
@@davidpelton_heathenvic how much was the replacement engine you used and or rebuild kit?
Inspiration definitely 2010 p71. Uhm I want 5.0 Engine buuuuut Me No Want manual. 6 speed Automatic will Sufffice Preferably 10 Speed Lol. But No Seriously How Extensive really Is The Motor Swapping Itself Ig I May Ask.
Can you put A10 transmission with the Cayote engine into a Crown Vic?
😮😮😮I think am in love that back slam and limiter gawd dam❤❤❤
'm ready to see more on all of em dope rides 🖖🖖
That hood scoop on the Fairmont😆
Wouldn't mind seeing a 3.5 ecoboost swapped Crock Vic
This is the dream. Absolutely beautiful work.
This is fucking badass 🔥🔥
This is everything I'll ever need
Amazed the OPG didn’t shatter the way to attacked the rev limiter. Cool car for sure.
It's got boundary gears and sprocket lol
@@davidpelton_heathenvic very nice, that means it should be able to handle a blower, any plans for that?
That's always been the plan lol just cost so much more
I’m happy somebody knows not to do that! Lol.
Hell yeah bro! I have a 94 grand marquis I want to Coyote swap!
I have a 03 P71 I am looking at 5.0 swapping with a t-56. I am saving to start getting parts. Your car looks and runs great bro. Thanx for the content.
Now how did you swap the front headlights to marauder style?
eBay/Amazon has black housing headlights that still have the screw on the side for Vics
you guys are cool as hell
One of my dream builds 🤤
Yoo how much this cost to do I wanna do this
That’s badass I wanna do that I also twin turbo to it as well
Man this is my dream project i wish i had more info
So you swapped intake manifold and the camshafts or just the camshafts?
She gets down.
What trans and what did you use for a center console is it from a interceptor?
Can I get a print of all you receipt for everything lol
Got dam brother I’m a true Chevy guy had a 1996 impala ss now I want a 2009 crown vic with a junkyard 5.0!!!!
thats bad ass
What’s the rev limiter set at ?
Strangled sticker?!!! My dude!!! 🤘🏻
But duuuuuude Orphan might be better!
How much was it
I just came here for the exhaust notes lol
Can you supercharge this?
Where ya pull the motor from? My towncar L got 557k miles n I think it’s about time for an upgrade
Dude wtf XD
@@Father_Paul_GT Bru my uncles towncar pushing 650k or sum
@@BakirNinja2012 need a town car instead of camry next
Jus did research, ur not joking
How much torque ?
Oh I'm in love how much was all that
too much..lol
He literally said the same price as boosting, which is 7000 from my understanding
If I want to tackle a coyote swap on my 03 crown Vic but keep auto what transmission would work with a gen 2 or gen 3 coyote? I’ve heard I’d have to make custom mounts but it should work?
Can buy mounts and a oil pan.
What suspension are you on? Nobody makes anything for the Town Cars but I figured since they're the same platform parts would be interchangeable suspension wise, so if you've got deats on that suspension setup lemme know bout it 👀
Adtr.net will have everything you need to lower a town car.
WOW....🤯
Killer Vic.
Nice car man how much do you waste to do the swap
What fuel system you go with?
Did you loose low end mid range torque ?
I looked thru the comments and I’m sure you covered it but may I ask what year Gt500 wheels those are? I wanted some from an 09ish Gt500 for my 08 p71 till I saw these babies. Gorgeous car btw!!
Idk what year they came on them.
Those are 2010+ gt500 non-performance pack wheels.
What you do to the suspension
So dumb question but I’m new here do u have to manual swap it to run the coyote ?
Nope
Yes sir.
💯👌
Damn bro everything was good till you said you bought a 6.0 liter😅😅 you know damn well you should have got the 7.3😅
Fucka 7.3 lol I like 6 liter noise booiiii
Do you still have your black vic
How hard is it to put a coyote in
Barefoot burnouts for the win
what’s the specs on the wheels?
What headlights do you have I seen the marauder side markers but curious what the main headlights are
I think just stock lol
love the wheels , any info on those ??
They’re 2012 GT500 wheels I believe
🤤🤤🤤 tryna find a shop to do my 96 GM, wish me luck
What exhaust system do you have bro sounds like love👍🏾💪🏾💯
All stainless works
What rims do you have on the Vic
In this video there 19x10 squared
How did you do the wiring? I want to put a coyote engine in my Marauder but I'm not too sure how to do it can you give me any tips
You can build your 4v to make way more power than a Coyote, i don't even know if Coyote swaps keep a/c, don't seem like it tho..
What are those rims called ?
They’re Rims
Thats a dope car
Honestly what should have come into these things
Love it 😍
What you get for mpg 😂 my car is stock 4.6 and I get 15 mpg
I'd be surprised if it was much lower than 18. I get 19-20 on my 9.5 mile commute, doing about 35 most of the way with a lot of stoplights. Coyotes are more efficient than the 2v 4.6, plus if you used the 6R or 10R80 it could only get better.
@@James-WM is your car naturally loyd with it being 3.55 gears? I had a mgm didn’t have the noise also replaced the trans back in June
@@MrSonic731 it's not 3:55, its 2:73 or whatever the stock gears are. If I do the coyote swap I'd probably go to 3:15s otherwise it may have trouble sticking in those 1st and 2nd gears.
@@MrSonic731 its stock other than a k&n intake runner and filter, and the h-pipe/muffler delete.
@@James-WM I bet it would get north of 30 mpg with a 10r80 and 2.73's
That’s what I’m going to do to my Mercury
My 4v 4.6 Vic would love to meet u
Where yat?
@@davidpelton_heathenvic Missouri u?
Why did that burn out infuriate me so??
How much
How wide r your wheels ? What the size of the rims?
19x10s
Dang!
There goes 500 for tires
@@frankiediamonds78 nooo
Beefy
A 5.0 from junkyard had to run you what.. $300?
It hurts me to see the abuse
It loves it
Why do that to that thing? You got power, why try to destroy it? Burnouts don't do a damn thing performance wise.
So I'm not allowed to enjoy burnouts? Lol many people like burnouts, if you don't, don't do any ya know
@@davidpelton_heathenvic to each his own.
Engine swap builds are better.
then why run that loud of an exhaust, it's dumb to be that loud, you can't enjoy a ride without the noise
You're telling me I don't enjoy my own exhaust? Lol
@@davidpelton_heathenvic it chased you out of the dyano...lol
@davidpelton_heathenvic do what you like, I know I pissed a lot of people off because I crown vic swap a 1985 chevy C10 truck...lmfao, my goal is to coyote swap it, when I can find a good one. every one was doing crown vic swap F100 , not me 85 chevy C10 truck...lol
@davidpelton_heathenvic I'm the 1st person to ever crown vic swap a C10 truck. I call it HalfBreed
Ls swap coyote swap depends on who’s building both great😂😢😅 engines