Thanks brother for the information. I will continue to watch ur videos u are a big help on how to transform out old trucks..into eye catching trucks ..the truck I have my dad always wanted to keep it clean but he passed away and he didn't get to see it how far I come with the custom work...but I'm going to finish it in his memory...if u want u can see it in my channel..but be safe out there in the road..be Bless brother u and ur family..
Daniel Hagos should be pretty much the same all you got to figure it’s the wires if it is the same colors fld should be the same otherwise get a tester and mark all wires and with the diagram on the video you shoul be good to go
Hey guy,I can't find Dennis Riggins Iron works,I need more info on how to locate this guy.I need to do a stretch out job on my rig. Thanks Any info that You can provide will be greatly appreciate it.
Yo bro let me ask you a question unrelated to this video. My 96 fld the ac in the bunk was cold and blew like crazy my ac stopped working upfront all together got it fixed upfront and now the bunk ac is still cold but feels like its one 1speed even though the nob is on 4speed any ideas what I can check in the bunk to fix it?
It’s the resistor it’s a square piece held by two like 1/4 inch screws that has like two or three cables conected to it It’s right there by the blower in the back that controls the speeds
@@fldlife well damn bro wasn't expecting a reply tonight lol thanks ill be replacing that tomorrow i go to texas alot and 106 heat at 7am sucks ass when the air aint blowing fast haha
The Reyes las antenas de CB converti a solo una la puse atrás de el sleeper como los peterbilt y la de el radio la eliminé pero venden unas en eBay que van dentro de el windshield por si quieres probar yo la elimine pero deje el cable por dentro de la cab y aún así tengo señal de radio no tan fuerte pero agarra las estaciones locales
K WinChronic the difference between classic and fld120 is pretty much wheel base and hood also classic has the air filters and exhaust pipes on the sides
Michael Zelaya quería mantener todo de freightliner y si te refieres a los de el hood yo trate los de volvo pero la visibilidad era menos y vibraban mucho
Nice
Kool
Mucha gracias fld, ahora si me animo a cambiar los mirrors. Lo que le sacava era ke no keria perder los heated mirrors pero tu video me ayudo
So fresh N so clean
Thanks
De el 1 a el 10. Que tan feliz estás con esta transformación por favor deja saver
We have FLDs, and I thought about using International Lt mirrors.
How did you paint them
I have a 2007 frieghtliner century I want to change out the mirrors what mirrors do u recommend brother
You can go with the cascadia but you have to reinforce the door otherwise they will shake
Thanks brother for the information. I will continue to watch ur videos u are a big help on how to transform out old trucks..into eye catching trucks ..the truck I have my dad always wanted to keep it clean but he passed away and he didn't get to see it how far I come with the custom work...but I'm going to finish it in his memory...if u want u can see it in my channel..but be safe out there in the road..be Bless brother u and ur family..
SALUDOS BENDICIONES CRES QUE LE QUEDE EL COFRE DE UN CLASIC XL
No amigo
Man I did the same but can't get wires right for the mirror? Any basic ideas to connect right
If you hook ‘em up as I show you they should work fine
Try to get ground from another place
Thanks for sharing 👍
Hola amigo donde se conecta el scangauge
Allí mismo donde se conecta para los códigos
Tengo un columbia 2006 .donde se conecta el logbook?
I have a question this possible do it on freightliner century?
I would like to see how you installed the hood mirrors
where can i find the spacer what is it called?
Made it out of 1 inch pexyglass
@@fldlife i put them on a 07 century but the passenger side small windows middle seal is in the very middle of it
Las estenciones de alante que completan cuando cierras el hood
do you have a model number for the mirrors?
No but Miamistar.com sells them
Here is a link miamistar.com/products/complete-mirror-with-arm-for-freightliner-cascadia?variant=12180024688708
@@fldlife Thank you very much.
Gracias bro me dio buena idea,quiero hacerlo en my columbia bendiciones
Nice truck! Glad you're giving some love to the lowly FLD. Great video...Nice up grade. Keep them coming. God's speed
Peter Wyndham Thank you sir yes I love my fld man!
Como se le ponen las extenciones de los fenders al camion
Fueron echas a mano con fibra de vidrio
Great video my friend
That’s a bad ass truck love that truck!
Great truck bro. I like the cascadia mirrors and hood mirrors it makes driving alot easier
Great 👍🏼 vídeo I want to it they look 👀 great man thanks
jose fernandez thank you!
Good job man. Do you have any idea on how to replace same mirrors on century?
Daniel Hagos should be pretty much the same all you got to figure it’s the wires if it is the same colors fld should be the same otherwise get a tester and mark all wires and with the diagram on the video you shoul be good to go
Custom fld120 How to videos thanks again
I have a 2007 frieghtliner century and I want to change out the mirrors to what mirrors do u recommend?
Nice truck bro question To paint those mirrors do u have to sand them down if so with what grid ?
600 grit should be good
👍👍👍👍👍👍
Nice job ,,do you have one on the hood mirrors
What measurement did u use for mounting the mirrors? I was hoping this video was showing u installing the from start to finish.
Can you explain to me with more details so I can try to help you
What measurement are your mirrors mounted at. Mirror mount measurement.
mirror hey bro. How did you stop the hood mirrors from shacking
Dispatching AFS in my case they never start shaking the ones on the doors shake a little I gotta reinforce the door
Thanks. I'm doing this on my 98.
Hey u k how good shop to lower trk for our fld120 and stretch out
Dennis Riggins Domínguez ironworks they very good they install air ride
Hey guy,I can't find Dennis Riggins Iron works,I need more info on how to locate this guy.I need to do a stretch out job on my rig. Thanks Any info that You can provide will be greatly appreciate it.
SEAL 521 Domínguez ironworks search for them on Instagram or Facebook
Where they located
Dennis Riggins I believe they are near Miami Florida
Nice truck i dont think u would sell it but if you would how much u want for it
Jaime Rios I won’t sell it it’s my money 💰 maker
Nice Fld. Keep the video’s coming
michael carrington thank you
Ya no tremendo ya lo hallé tu video de los espejos 👍🏼
Where is that located at that does the windows like that I’m in Miami I would like to get my classic done
ROBINSON 81 I don’t know exactly I will find out and comment below
Custom fld120 How to videos okay cool that would be great 🙏🏾🙏🏾
Did you drill 4 holes in the door?
Yes
I like know were can you get the full glass for these trucks nice truck
Don Ford I don’t know exactly where because them guys don’t have a big shop but I know when I am ready I’ll make a video and include all the info
Eso sí es tenerle amor a tu carro, saludos colega desde Mcallen Tx
Tocita Menchaca gracias y saludos bendiciones
Yo bro let me ask you a question unrelated to this video. My 96 fld the ac in the bunk was cold and blew like crazy my ac stopped working upfront all together got it fixed upfront and now the bunk ac is still cold but feels like its one 1speed even though the nob is on 4speed any ideas what I can check in the bunk to fix it?
It’s the resistor it’s a square piece held by two like 1/4 inch screws that has like two or three cables conected to it
It’s right there by the blower in the back that controls the speeds
@@fldlife well damn bro wasn't expecting a reply tonight lol thanks ill be replacing that tomorrow i go to texas alot and 106 heat at 7am sucks ass when the air aint blowing fast haha
Thx!
Una pregunta el empaque del marco de las puertas va en la cabina o en las puertas???
Truck clean
Stitch T thank you sir!
@@fldlife wel fam
Oye el Plexiglass los uniste con el pegamento asta que quedó el grosor que querías o como ?
Hola, que año es el truck ?
Del 2000
Hermano,has el video en español,te seguimos mas que en inglés
Nice video. I have 98 fld. What year truck did your mirrors come from?
Mine came from a first gen cascadia
Hey cual es el nombre de los spacers que me gustaron como se ven los tuyos
Jorge Lopez esos yo los fabrique con plexiglass
Custom fld120 How to videos perfecto es que me gusto cómo quedan los del cascadia otra cosa tiene para las antenas
Jorge Lopez cambie las antennas del CB hacía atrás de la cabina solo instale una
Custom fld120 A ok ahorita te mando un video del mío para que tú lo veas te la mando por DM
En donde tienen conectadas las antenas del cn y de radio? Esque yo boy aser lo mismo pero mis antenas las tengo en las brakets de los espejos
The Reyes las antenas de CB converti a solo una la puse atrás de el sleeper como los peterbilt y la de el radio la eliminé pero venden unas en eBay que van dentro de el windshield por si quieres probar yo la elimine pero deje el cable por dentro de la cab y aún así tengo señal de radio no tan fuerte pero agarra las estaciones locales
What's the difference between a FL FLD120 and a classic?
K WinChronic the difference between classic and fld120 is pretty much wheel base and hood also classic has the air filters and exhaust pipes on the sides
Cuando pongas one piece glass window as un video cual es tu facebook
Big Cuban M claro que si y en
My Facebook no pongo nada 😂 instagram custom_fld
Tengo un camión como el tuyo puedes hacer un video acerca de cómo adaptar el escape que tienes por debajo en tu camión
Yasser Lopez si claro que si
Por fin eh querido saver como aserlo, que pasa si no le pones el spacer? Subcribete a mi canal yo tambien tengo in fld120
The Reyes ya me subscribí ☺️
The Reyes si no pones el spacer no vas a ver nada 😅
Custom fld120 How to videos si ya mire el final del video
Mi camión tenía 2 escapes y le dejé solo uno pero quisiera ponerlo como esta el tuyo
Que grosor tiene el separado de los espejos 1 o 2 pulgada
De esos espejos no soy fan, me gustan mas los de Volvo... pero hey es tuyo no mio!
Michael Zelaya quería mantener todo de freightliner y si te refieres a los de el hood yo trate los de volvo pero la visibilidad era menos y vibraban mucho
How did you paint the mirror what you use