loved this, i just got my FCB and this got me to set it up for standalone in under an hour! PLEASE do one about inside a daw, specifically reaper or ableton would be sweet. also side note for all, i have a windows laptop and a scarlett solo with NO midi inputs, but was directed to buy the Roland UM ONE Midi to USB and it recognizes the pedal and works!! even has a switch on it for PC or Mac. you're welcome !
Maaaaaan this video makes my day!!! I'm struggling for a long time making this midi footcontroller works. Now, with this help I'm on half of the way to complete a functional digital rig. Now I've to figured out how to solve my Fcb1010-to-Pc communication issue.
Thanks for the video. Let me get this straight: 1) you connected your guitar to the computer using a guitar cable going into an audio interface which is connected to the computer via USB. 2) you then used the behringer FCB1010 , connected it to a MIDI-USB interface which is then connected to the second USB slot in your computer. 3) your audio driver is ASIO with input and output channels selected as the I/O of your interface 4) the neural dsp plug-ins recognise the fcb1010 (or the roland UM MKII, or whatever USB MIDI interface you’re using) to send the PC and CC messages 5) you’re using the stock firmware of the fcb1010 You only talked about the software side of things, which is fine but it’s the modular nature of the setup which is more confusing. Programming the MIDI device is a pain too but it would have been great if u started right from the beginning.
my takeaway from this video is. I've found Element again! I actually have known it before when it has Pro version, but I can't afford it because of priorities (family, responsibilities etc.) Now I can try to route my VST plug-ins using Element!
Thank you ! I will try "note preset". I set CC in the FCB1010 and it works on my neural plugin standalone. But I can't get make it work with Element. edit: "Note preset" works ! But I went with "Note value" to change the transpose interval. I could have done it with one preset by semi-tone but 1 preset it's cleaner and I think (but may be wrong) that will avoid a bit of latency. edit 2: PC value works also so I will go with that. The FCB1010 can send 5 PCs so it can be useful at some point.
Thank you. I was so close to getting this done this exact same way, but to forge a preset that produces sheer silence? That did not come to my mind. Funny thing: my MIDI floor controller somehow defaults to Note when entering the "user defined" mapping, which allowed me to skip programming the buttons (and C0 somehow works, device-related it seems).
hey men i have the same setup, but in my case i can use the PC messages from the FCB... my way to use is a little bit different I have the 10 presets (1 clean, 2 Edge, 3 crunch... 10 Metal), in the Plugins (Nolly and Plini)i have the 10 preset, the clean sound is made by Plini, so nolly is muted the second is the same clean busted with th od + the clean amp from nolly (you can use more than one plugin at the same time if you find the right spot for the IR), my '80 glam sound is the 5150 from nolly and the second apm form plini busted and it sounds like a monster. So For everybody who is trying this yes you can but is a kick in the jewels XD. Greetings from Chile
Hola Felipe! Sabes como se hace el Toggle en el Element?? porque puedo hacer "enable" los parámetros pero no puedo apretar el mismo CC o Note y que se vuelva a apagar =P Soy de Chile! Saludos :D
Are you running this within a DAW? I have no problem setting up my midi controller in the neural DSP standalone version, everything works fine, but inside the DAW ( I’m using studio one 5 ) I can’t get it to learn the preset changes. Hoping maybe you could help out.
Great video! But why don't you just have a different amp(s) in different graphs and switch between them? Or is there is a lag in between the graph switching? Gig performer is supposed to work instantaneously so I assume this does the same?
Running that in Standalone worked for me at least fine with PC# and CC# (using the Mp100 from Harley Benton) but running this shit inside of a DAQ (Reaper in my Case) and also beeing able to record your MIDI input is pure hell.
Great informative video. I have a neural dsp soldano going into reason 12 connected by a behringer umc404hd and thinking about purchasing a FBC1010 to switch from dirty to clean presets and use one of the pedals as a volume. Can you control a DAW record, play etc from the FBC1010 controller?
Wow thank you for this! I was looking for a way to control STL AmpHub with a midi controller! It seems to be worth the headache lol. One question... please tell me the delay and reverb can cross-over when switching presets (does it continue to ring, or the fx cut?). This is the only thing i miss from my Axe Fx and Kemper.
Yo! Sorry for the slow reply, only just seen this! I actually need to do a new version of this video, because I figured out a way to do that so the FX carry on after patch changing. Its a more complex setup, but ooooooooh boy is it good once its done. I'll try and get it done soon. Want to work out the kinks first The trick is to keep your patches/sounds separate from the FX
So can I do this this with individual tracks from a DAW like logic instead of using the stand alone plugins? Using each track as preset so to speak? I want to use a few reverb plugins along with the neural stuff. Cant get over FF ProR. Gotta have that in there somehow.
They are, yes! Takes a good minute or 2 with the more advanced setup I am running now. CPU sits at a hefty 70-80% usage and struggles to keep up right away. It's not my computer CPU power either as I have a very new beast of a machine and Element doesnt take it above 5% but the plugin hovers at around 70% when it has been running for a little while. I plan on doing a more updated version of this video soon as I figured out a GREAT setup for continuing delays and reverbs when changing to pretty much anything now. It's awesome lol I'll do another video when I have better screen capture quality figured out and know I've got the best setup sorted out. I hate it when I put a video up and change something for the better right after! Took a lot of figuring but 100% worth the effort
How do you get Element to find the Neural DSP plug ins? I Have Apple; Element and Kushview in the list but Element will not load Cory Wong Neural DSP nor can I import it. Attempting to load CW form the Unverified plug in menu results in a message "Fatal Error 100000" every time
Would you teach me how to use my fcb1010 with my dsp plug ins I'm super new with midi so I don't really understand the basics(willing to pay) I'll buy the software you mention as well so I can set up multiple plugins....thank you in advance
How can i make an specific parameter to toggle?? I can make a CC or Note to turn on the effect but i would like to press that again to turn off )= Cheers from Chile!!
I just had a hell of a time just getting a midi expression pedal to work with my Neural Plugins in Ableton. I have to use a separate midi interface and it got complicated fast. Figured it out but Ableton won’t remember the settings when I save it 😭. Got it pretty fast to set up at least now
So isn't it possible to just select & solo a track in a D.A.W ? I'd love to use neural Dsp live with say Valhalla verb and other weird plugins. but I'm not sure the best way to go about it.
Yeah i tried it but i still have some strange sound coming out of my stream ... can you send me the routing for out.. i already got the elements... just dont know how to work it on restream
I got the same issue and I tried every way I could to get past that - following the Guitar School Live YT channel video on how to control multiple Neural DSPs using the FCB1010 and Element - they also use PC, but I'm on Mac. Neural plugins would only show as Unverified plugins in the scroll menu but even from there I always got the Fatal Error message every single time. BUMMER Emailed Neural DSP about it, they said Element is not supported ( when clearly some PC users are using it just fine ) That response was pretty vague and they haven't followed up further. I'm here trying to solve that problem using Element ... or find another way if it's not going to work.
This is the second video I’ve watched where the presenter did not understand the unit himself, nor could he talk without stammering. I can’t follow people when they can’t talk. Obviously, Berhenger needs to make some tutorial videos for this themselves. The 3rd party videos I have seen are no help at all, and in fact, even create more confusion than starting from scratch with a braille manual.
*My man , I have a hella great rig programmed into ELEMENT, However, I can not use midi cc and midi pc changes to control element properly. I use a LIQUID FOOT PRO.. It makes no sense, you care to converse about this?*
loved this, i just got my FCB and this got me to set it up for standalone in under an hour! PLEASE do one about inside a daw, specifically reaper or ableton would be sweet. also side note for all, i have a windows laptop and a scarlett solo with NO midi inputs, but was directed to buy the Roland UM ONE Midi to USB and it recognizes the pedal and works!! even has a switch on it for PC or Mac. you're welcome !
I just got mine and I’m trying to get it setup
Ahhh the first few seconds sounded like Heaven. Great video!
I know I'm 2 years late but the Owane "K" lick at 0:45 caught my attention! Never heard anyone other than Owane play Owane lol.
Maaaaaan this video makes my day!!! I'm struggling for a long time making this midi footcontroller works. Now, with this help I'm on half of the way to complete a functional digital rig. Now I've to figured out how to solve my Fcb1010-to-Pc communication issue.
Thanks for the video. Let me get this straight:
1) you connected your guitar to the computer using a guitar cable going into an audio interface which is connected to the computer via USB.
2) you then used the behringer FCB1010 , connected it to a MIDI-USB interface which is then connected to the second USB slot in your computer.
3) your audio driver is ASIO with input and output channels selected as the I/O of your interface
4) the neural dsp plug-ins recognise the fcb1010 (or the roland UM MKII, or whatever USB MIDI interface you’re using) to send the PC and CC messages
5) you’re using the stock firmware of the fcb1010
You only talked about the software side of things, which is fine but it’s the modular nature of the setup which is more confusing. Programming the MIDI device is a pain too but it would have been great if u started right from the beginning.
Great video! We need more videos like this one since VSTs and amp sims are getting more and more popular
Thank you for posting this, it's a massive lifesaver.
thank so much !!! you forget to say turn on midi in preference and select the good output device !
Insta like for playing trough the never. This is a sick and smart idea.
my takeaway from this video is. I've found Element again! I actually have known it before when it has Pro version, but I can't afford it because of priorities (family, responsibilities etc.)
Now I can try to route my VST plug-ins using Element!
Thank you ! I will try "note preset".
I set CC in the FCB1010 and it works on my neural plugin standalone.
But I can't get make it work with Element.
edit:
"Note preset" works ! But I went with "Note value" to change the transpose interval. I could have done it with one preset by semi-tone but 1 preset it's cleaner and I think (but may be wrong) that will avoid a bit of latency.
edit 2:
PC value works also so I will go with that. The FCB1010 can send 5 PCs so it can be useful at some point.
Sounds good mate!
Thank you. I was so close to getting this done this exact same way, but to forge a preset that produces sheer silence? That did not come to my mind.
Funny thing: my MIDI floor controller somehow defaults to Note when entering the "user defined" mapping, which allowed me to skip programming the buttons (and C0 somehow works, device-related it seems).
hey men i have the same setup, but in my case i can use the PC messages from the FCB... my way to use is a little bit different I have the 10 presets (1 clean, 2 Edge, 3 crunch... 10 Metal), in the Plugins (Nolly and Plini)i have the 10 preset, the clean sound is made by Plini, so nolly is muted the second is the same clean busted with th od + the clean amp from nolly (you can use more than one plugin at the same time if you find the right spot for the IR), my '80 glam sound is the 5150 from nolly and the second apm form plini busted and it sounds like a monster. So For everybody who is trying this yes you can but is a kick in the jewels XD.
Greetings from Chile
Hola Felipe! Sabes como se hace el Toggle en el Element?? porque puedo hacer "enable" los parámetros pero no puedo apretar el mismo CC o Note y que se vuelva a apagar =P Soy de Chile! Saludos :D
@@felipehoferdenecken9332 ua-cam.com/video/myV8wzDdlVg/v-deo.html
Are you running this within a DAW? I have no problem setting up my midi controller in the neural DSP standalone version, everything works fine, but inside the DAW ( I’m using studio one 5 ) I can’t get it to learn the preset changes. Hoping maybe you could help out.
Great video! But why don't you just have a different amp(s) in different graphs and switch between them? Or is there is a lag in between the graph switching? Gig performer is supposed to work instantaneously so I assume this does the same?
Running that in Standalone worked for me at least fine with PC# and CC# (using the Mp100 from Harley Benton) but running this shit inside of a DAQ (Reaper in my Case) and also beeing able to record your MIDI input is pure hell.
Can we get a preset for the Element so we don't have to do it from scratch? Thank you!
Great informative video. I have a neural dsp soldano going into reason 12 connected by a behringer umc404hd and thinking about purchasing a FBC1010 to switch from dirty to clean presets and use one of the pedals as a volume.
Can you control a DAW record, play etc from the FBC1010 controller?
Wow thank you for this!
I was looking for a way to control STL AmpHub with a midi controller! It seems to be worth the headache lol. One question... please tell me the delay and reverb can cross-over when switching presets (does it continue to ring, or the fx cut?). This is the only thing i miss from my Axe Fx and Kemper.
Yo! Sorry for the slow reply, only just seen this!
I actually need to do a new version of this video, because I figured out a way to do that so the FX carry on after patch changing. Its a more complex setup, but ooooooooh boy is it good once its done.
I'll try and get it done soon. Want to work out the kinks first
The trick is to keep your patches/sounds separate from the FX
@@TimatorA Interesting! Thanks for the reply man!
@@TimatorA I can't wait for this. Hope Neural implements the seamless patch switching in the future.
Nice video. So you have an interface with midi input? I dont have (steinberg MKII)..any ideas???
Hello mate, How do calibrate the expresión pedals in the FCB 1010? Thanks
Wow super awesome thank you please do follow up video on improvements 👍🏾🎸
So can I do this this with individual tracks from a DAW like logic instead of using the stand alone plugins? Using each track as preset so to speak? I want to use a few reverb plugins along with the neural stuff. Cant get over FF ProR. Gotta have that in there somehow.
Hello, can you make a one video only for one plugin for example Gojira for Line 6 fbv 2 express
Thanks for review! What's about CPU usage when you starting up all Neural DSP at the same time ? These plugins are very "heavy" for the processor.
They are, yes! Takes a good minute or 2 with the more advanced setup I am running now. CPU sits at a hefty 70-80% usage and struggles to keep up right away.
It's not my computer CPU power either as I have a very new beast of a machine and Element doesnt take it above 5% but the plugin hovers at around 70% when it has been running for a little while.
I plan on doing a more updated version of this video soon as I figured out a GREAT setup for continuing delays and reverbs when changing to pretty much anything now. It's awesome lol
I'll do another video when I have better screen capture quality figured out and know I've got the best setup sorted out. I hate it when I put a video up and change something for the better right after!
Took a lot of figuring but 100% worth the effort
Will it be possible to make a midi tutorial with the FCB 1010 and the Boss GT 1000 Core thank you
How do you get Element to find the Neural DSP plug ins? I Have Apple; Element and Kushview in the list but Element will not load Cory Wong Neural DSP nor can I import it. Attempting to load CW form the Unverified plug in menu results in a message "Fatal Error 100000" every time
Ah this sounds like a problem with Element. Try reinstalling Element and if that doesn't help, email Kushview support. That's all I can suggest
Would you teach me how to use my fcb1010 with my dsp plug ins I'm super new with midi so I don't really understand the basics(willing to pay) I'll buy the software you mention as well so I can set up multiple plugins....thank you in advance
Any update on your issue with the delay and reverb not trailing off?
If I’m not trying to use multiple plug ins do I still have to make everything I want to change note values?
Do you know what the reason would be for a delay in switching between presets with the FCB1010?
How can i make an specific parameter to toggle?? I can make a CC or Note to turn on the effect but i would like to press that again to turn off )= Cheers from Chile!!
I just had a hell of a time just getting a midi expression pedal to work with my Neural Plugins in Ableton. I have to use a separate midi interface and it got complicated fast. Figured it out but Ableton won’t remember the settings when I save it 😭. Got it pretty fast to set up at least now
I need to know how to do this in ableton!! Help!!
So isn't it possible to just select & solo a track in a D.A.W ? I'd love to use neural Dsp live with say Valhalla verb and other weird plugins. but I'm not sure the best way to go about it.
plus the delay not continuing when u change a preset is a biggie!
PS Thanks for this video! It's inspiring to work this crap out! haha
How did you null in presets in midi mapping doesn't show for me
it's not true that program change doesn't work ,it works for me
what did you use so we can hear it ??
Restream!
try.restream.io/
Yeah i tried it but i still have some strange sound coming out of my stream ... can you send me the routing for out.. i already got the elements... just dont know how to work it on restream
will this work with the eureka mod chip?
Not doing monthly subs for software. hopefully someone else will make something I can buy and own
You can do a 1 off payment. The sub is to get every update they put out I think. I only paid once for it.
Kushview Element (stand alone) for now is not working with Neural dsp. :(
I get a fatal 10000 error - does anyone else get the same thing on mac using kushview ??
I got the same issue and I tried every way I could to get past that - following the Guitar School Live YT channel video on how to control multiple Neural DSPs using the FCB1010 and Element - they also use PC, but I'm on Mac.
Neural plugins would only show as Unverified plugins in the scroll menu but even from there I always got the Fatal Error message every single time. BUMMER
Emailed Neural DSP about it, they said Element is not supported ( when clearly some PC users are using it just fine )
That response was pretty vague and they haven't followed up further.
I'm here trying to solve that problem using Element ... or find another way if it's not going to work.
This is the second video I’ve watched where the presenter did not understand the unit himself, nor could he talk without stammering. I can’t follow people when they can’t talk. Obviously, Berhenger needs to make some tutorial videos for this themselves. The 3rd party videos I have seen are no help at all, and in fact, even create more confusion than starting from scratch with a braille manual.
*My man , I have a hella great rig programmed into ELEMENT, However, I can not use midi cc and midi pc changes to control element properly. I use a LIQUID FOOT PRO.. It makes no sense, you care to converse about this?*