3 Stick Welding Electrodes Compared: 6013 vs 7018 vs 6010

Поділитися
Вставка
  • Опубліковано 16 чер 2024
  • Pick the right rod...Shielded Metal Arc Welding (SMAW) Basics
    Learn welding in my $39 online courses:
    courses.timwelds.com
    Stick Welding Gear I Use:
    Awesome Chipping Hammer: amzn.to/3ItgnBp
    Welding Jacket: amzn.to/43gLLL5
    MIG & Stick Gloves: amzn.to/3Wk9qIw
    Machine used in this video:
    HTP Welder: usaweld.com?ref=timwelds
    Legal:
    This description contains affiliate links that provide a small commission from sales. Metalwork can be dangerous. TimWelds assumes no responsibility for anything you choose to do. Be safe out there!
  • Наука та технологія

КОМЕНТАРІ • 174

  • @MrFanaticrat
    @MrFanaticrat Рік тому +81

    This man is a guru. I purchased his course and I have learned more in a month than in half a year practicing by my own. I highly recommmend it.

    • @TimWelds
      @TimWelds  Рік тому +8

      Thank you so much!

    • @F1DesignUS
      @F1DesignUS Рік тому +5

      Same here....I bought the TIG course and it has been a huge help...I review the videos while practicing.

    • @pasadiko401
      @pasadiko401 Рік тому +2

      Same here, having electrical background I needed “little bit” of theory and practical pointers as well. For me his online course was excellent and at 68 I actually learned a lot. But as he says, practice, practice and then - voilá, it all comes together. 👍

    • @logik4264
      @logik4264 8 місяців тому +2

      I've started practice 3 weeks ago, and I switched from weldingtips andtricks to this channel and also discovered Making mistakes with Greg channel. I feel like wt&t is to advanced for me (probably I'll return to it in the future) but TimWelds and Making mistaked with Greg are perfect for noobs like me (great explanations of the basics). After three weeks of watching and practicing I put together my own welding cart and it rolls!
      YT is great

    • @JHizzleinthebizzlePNW
      @JHizzleinthebizzlePNW 7 місяців тому

      I'm going to look into that

  • @paulp8251
    @paulp8251 7 місяців тому +1

    Just signed up for coarse based on other comments excellent value and the content is so well explained, really impressive!!
    Best $59 I’ve spent in a long time. Thanks for sharing all your knowledge

  • @rowlinstoned3715
    @rowlinstoned3715 Рік тому +1

    Man I'm so glad I found u. U give the BEST instruction and tips. I've tried a couple little tips that seem so miniscule but can make a world of difference. Love watching. Some people just have an unwatchable personality or voice. Not even sure what it is but u have a good presence.

  • @yoelroque3950
    @yoelroque3950 7 місяців тому

    Thanks Tim for explaining everything in detail, I’m just starting to learn how to weld just to do small things around the house & as another hobby

  • @breandonross
    @breandonross Рік тому +1

    Thank god for you I’m in school now for this an I learn more from you than my instructor 💯

  • @jonbarnes4970
    @jonbarnes4970 Рік тому +13

    I personally use 6011 & 7018 a lot at work, and don't really have any experience running any other rods. I like the channel because I feel it gives me an idea what to expect if I ever have to use anything I'm not familiar with.

  • @k.c.meaders4796
    @k.c.meaders4796 Рік тому +10

    I love your classes, I have found that the 7014 rod is the easiest to use in almost all my DIY and blacksmith projects. (1/8 and 3/32)

  • @hammaswingah1693
    @hammaswingah1693 3 місяці тому +3

    Top notch teaching, warts and all, great job.
    I only do farm type welding and only use 6011 and 6013. 11 for thick and rusty and 13 for thin and clean. Both are Hobart from Tractor Supply Company. 1/8" usually set on 90 or 105 on my Lincoln buzzbox. Never had any of my ugly welds break yet. I did just order online some Esab Sureweld 6013 green rods. Looking forward to giving them a try, I hear they're great.

  • @chrisamar5137
    @chrisamar5137 Рік тому

    Hey Tim excellent presentation there. Thanks for making this video

  • @stormbytes
    @stormbytes 5 місяців тому +1

    Really informative. Would be great to have a sequel showing additional electrode types or maybe a video showing actual fab work. Thanks!

  • @RG-ce5hj
    @RG-ce5hj 11 місяців тому +2

    Tim, i just bought a vevor mma-140 and some 6011 3/32 and will be unboxing and trying it out in the morning. I've been binge watching your videos and i have to say your presentation/style and info are clear and to the point. Really looking forward to seeing how long it will take to lay down that first bead.👍

  • @williamscott6291
    @williamscott6291 2 місяці тому

    Very nice presentation. I learned welding in a junior college night class 40 years ago and at that time stick welding was the state of the art although MIG was around but not so common. I like stick welding because it allows one to get into small places such as on an assembled vehicle.
    I would like to have heard you comment on 7014 rods as that is what I have and use a lot.
    I would have liked to have seen you weld some 1/8 inch mild steel onto the frame of a vehicle which is what I am doing now. I am very anxious about this because I know it is easy to burn through the frame which creates a weak spot.

  • @things971
    @things971 Рік тому

    Good to see you back

    • @TimWelds
      @TimWelds  Рік тому

      Thanks a ton! It's great to be back publishing on the regular!

  • @YT-User1013
    @YT-User1013 Рік тому +10

    My favorite, because I can’t seem to stick weld very good, is the 7014.
    So easy to use.

    • @TimWelds
      @TimWelds  Рік тому +4

      I've tried some 7014, they're really user friendly. Easy like a 6013, but not as much of an issue with the slag.

    • @catgirl4499
      @catgirl4499 27 днів тому

      ​@@TimWelds why they aren't the best?

  • @user-zf2yj6wn4l
    @user-zf2yj6wn4l 3 місяці тому

    Thanks a lot bro. I just learned some important tips from you

  • @Ezdoesit0127
    @Ezdoesit0127 Місяць тому

    Those black stallion gloves have been the best gloves I’ve found over the years. Love them

  • @miszced
    @miszced Рік тому +1

    Hey Tim, good clean simple presentation on the 3 common SMAW rods in use. I do believe some of the pros out there can use the larger 6010 diameter (5/32 & 3/16) for arc gouging once the polarity is switched.

    • @TimWelds
      @TimWelds  Рік тому +1

      Thanks a ton! That could be a prett cool way to gouge, I may have to look into that. I've only used air carbon arc gouging, but it's been a decade since I did much of that...don't miss that process much.

  • @RogierYou
    @RogierYou Рік тому

    Looking great Tim

  • @soundman6645
    @soundman6645 Рік тому +9

    Here in Australia 6013, is the dominant welding rod, because for decades CIG ( Commonwealth Industrial Gasses), THE dominant player in the welding market at the time, pushed their Satincraft 13 brand very hard.
    So we all grew up using either Satincraft13 ( blue electrodes) or "GP" (grey electrodes, probably 6012) and most of us did not know about or use much else.
    .
    They ( 6013) are easy to produce a good looking weld with, but it is also very easy to get a very poor weld, with poor penetration and lots of slag inclusion.
    .
    We all learned on 120 amp buzz box type welders and 3.2mm ( 1/8) 6013 rods. Most did not progress any further.
    .
    Two very important things I wish I had learned decades earlier
    #1 run your rods high in the amp range, if you are not right at the top of the amp range, get some smaller rods.
    This is especially true of 6013, otherwise you will get poor penetration and slag inclusion.
    #2 learn about other rod types
    .

    • @TimWelds
      @TimWelds  Рік тому +1

      That's really interesting; I never knew why they were so popular. I agree 100% with both of your takeaways. Thanks!

    • @miszced
      @miszced Рік тому +1

      Not sure what more to add. Looks like ESAB w/ its cigweld brand pretty well dominated your welding territory. Maybe your area was niche & limited to blue & gray electrodes. Cigweld has a full range of filler metal choice. Some competition (if economial) might of been more healthy for the consumer. Cheers from sunny Florida.

    • @soundman6645
      @soundman6645 Рік тому

      @@miszced ESAB was pretty much unknown here till quite recently.
      We saw some lincon and a couple of other US brands, but only in the big end of town.
      Back in the 70's and 80's CIG was pretty much the only game in town.
      Untill a french company, then branded as "liquid Air" came to town, you where buying your gas from CIG. Even then we where paying extortionate rental on your bottles.
      It's only in the last 10 years of so we have had a number of independent gas suppliers come on to the market to bust up the rip off duopoply
      They always had a full range of CIG rods, but out side the specialist welding trade, we had Satincraft 13's and GP's and that was about it.
      A lot of that is because unless you where a high end welder you where welding AC
      Because of the very strong market position Satincraft 13's are very much over priced.
      I can buy good brands of 6013's for half the price, generics for even less, these days and now you can buy a good range of rods without going to a specialist welding shop.
      That said the average hardware shop will pretty much have 6013's and maybee somethung that equates to a GP or 6012.
      .
      Stick welding is not the BIG thing is is in the US.
      MIG and TIG has replaced stick and OXY in the vast majority of cases.
      .
      Like plasma cutting has replaced gass cutting in everythung but heavy work.

    • @miszced
      @miszced Рік тому

      @@soundman6645 yes, familiar with Air Liquide & AIRGAS plus LINC. As far as the demise of stick welding process ... it's still here! Besides being a mature product, innovation continues with cost cutting & competitive benchmarking. The leap-frog* happened when the covering of stick electrode became the core of a steel sheath into gas shielded, selfshielded & metal core tubular wires for semi or automatic arc welding.
      * bit of an over simplification

  • @F--kyouTony
    @F--kyouTony 8 місяців тому +2

    I learned early on( for me) that single free hand works a lot better because I kept getting pushed out of position towards the end of the rod. My left hand just kept getting in the way!!

  • @ilijaeftimovski7851
    @ilijaeftimovski7851 4 місяці тому

    Great job Man

  • @guye7763
    @guye7763 Рік тому

    I also have just done the courses and they are great.
    Thanks.

    • @TimWelds
      @TimWelds  Рік тому

      Thank you so much!

    • @Sosant260
      @Sosant260 7 місяців тому

      What brand electrode do you buy?

    • @guye7763
      @guye7763 7 місяців тому

      Lol, what ever I can get in outback Australia 😂

  • @kevinaponte7078
    @kevinaponte7078 Рік тому

    Awesome video keep up the great work

  • @johnmacmillan627
    @johnmacmillan627 4 місяці тому

    Tim, that clamp position is an excellent suggestion. Thx for the tip

  • @amfpvt
    @amfpvt 4 місяці тому

    Buy the course. Thank me later. It is great value. Yes, actual paying customer. It has excellent explanations and demonstrations. It's sequential and broken down so you don't get lost. You can re-watch parts of it many times if needed, which I have. I literally had no idea when I started and in fact have never welded. I just wanted to learn stick welding to do some projects around the house. So far, the courses helped me to not electrocute myself and not to burn myself or the house down (basic fabrication and safety part of the course). This makes my wife happy. Now starting to lay some beads of weld which look OK and doing some joins. How good. I literally started knowing nothing at all. Not a thing. If I can learn, anyone can. Thanks Tim. Awesome. Cheers

  • @chikowhitey
    @chikowhitey Рік тому

    thanks Tim, great vid mate

  • @user-mn5ir9ou9n
    @user-mn5ir9ou9n 6 місяців тому

    Great information... Thank you

  • @kofibentum4708
    @kofibentum4708 8 місяців тому

    I'm watching you from Ghana and I'm in love with wilding job

  • @paddlepower888
    @paddlepower888 6 днів тому

    I have a love hate relationship with 6013. Sometimes it doesn’t leave enough metal in a joint. But mostly, it’s the cat’s meow, giving me the smoothest joints.
    I probably need to take your course to become more consistent.

  • @nevilanderson8123
    @nevilanderson8123 3 місяці тому

    Awesome video

  • @georgegriffiths2235
    @georgegriffiths2235 7 місяців тому +2

    Served my welding apprenticeship in a British shipyard BOC Vodex 6013 were the dominant rod all position as with all 6013’s finding the sweet amperage is the answer I have always found they run better on AC back then I could get a peel in any position Vodex 6013 are the best general purpose rods I have ever used 6018 Philips 56 s take some beating and 6010 NU 5s are my go to only got 50 years experience behind me so maybe one of the older guys could throw me some advice 🤣🤣

  • @seanwilson471
    @seanwilson471 8 місяців тому

    Great stuff again thanks. Any tips on cleaning the electrode holder (stinger)
    Mine is the black and yellow esab one and the spring is pretty strong and the contacts are quite dirty

  • @autodidacticartisan
    @autodidacticartisan Рік тому +9

    I love 6013. 7018 is still my favorite go-to rod but 6013 has alot of benefits. It's great for thin metal since it comes in 1/16" rods which few others do. And like you mention it's easy to strike an arc

  • @kirisameM
    @kirisameM Рік тому +2

    6010 such a mystic rods, we dont have them around here, in Russia
    I usually use 6013 and 7015-G, and sometimes 7016

  • @aerotech1bob
    @aerotech1bob 7 місяців тому

    Great content, thanks

  • @toivor7807
    @toivor7807 9 місяців тому

    Thank you 😁😁

  • @Loverboy_Bernice1977
    @Loverboy_Bernice1977 8 місяців тому

    Your a great man Tim. God bless you. ❤❤❤🎉🎉🎉😊😊😊

  • @johnvaillancourt5402
    @johnvaillancourt5402 8 місяців тому

    6011 is called a farmer rod in Maine. Paint, rust it don't care. I'm going to be getting some 6010's where I weld a lot of 1/2 and 3/4. Thanks for the info

  • @user-jh5ir7xe3w
    @user-jh5ir7xe3w 2 місяці тому

    That good am impressed and interested I want to learn more

  • @martinthompson4462
    @martinthompson4462 Рік тому +3

    I am in Australia and I do a lot of heavy repair work. I always use WIA 16tc rods. I guess you guys would have something similar. They leave a shiny glassy slab, and are an absolute pig to restart, I usually have an old house brick on hand, drag them across that and they start easily.

    • @JC-dc7ez
      @JC-dc7ez 11 місяців тому

      Agreed! I enjoy a piece of rough concrete for this.
      Have you tried the unimig rods?

    • @martinthompson4462
      @martinthompson4462 11 місяців тому

      @@JC-dc7ez I have had a go at one of the opposition rods, cannot remember which brand. Was pretty good except overheads. I use nothing but Hyundai mig wire, great stuff

    • @JC-dc7ez
      @JC-dc7ez 11 місяців тому

      @@martinthompson4462 i will get myself a role and check it out. Thanks

  • @Kevin-wy8kc
    @Kevin-wy8kc 7 місяців тому

    Hey man great Channel I've got a about 13 mm round piece of Steel that I need to weld the same diameter end to end it was good I thought until it failed and it looks like the steel rod didn't get hot enough for the weld to fuse it was just the weld material holding it together and that was with my $200 Amazon welder with a 6013 rod I have a super old it says WS 225 k wire feed arc welder with Mac Tools branding on it that should give me different results I'm assuming or is welding something end to end like that not as strong?....thanks!

  • @kellydiver
    @kellydiver 8 місяців тому

    Brilliant! What kind of welding rod did you use? 6013?

  • @luciusirving5926
    @luciusirving5926 8 місяців тому +2

    7018 is the best for cast iron out of all those electrodes, but preheat and clean with 6010. 6011 if using a standard inverter.

  • @edysanjaya160
    @edysanjaya160 8 місяців тому

    Terima kasih sudah berbagi ilmu ❤❤❤

  • @austinevans4625
    @austinevans4625 7 місяців тому

    Thanks man

  • @itzchappyyo7592
    @itzchappyyo7592 Рік тому

    I've had slag peel from 6013, 7018, and 6011. As well as 308l, 309l, 316l stainless electrodes 🤙🤙🤙

    • @TimWelds
      @TimWelds  Рік тому

      Right on! 🔥🔥🔥

  • @Shaggy_Rogers0001
    @Shaggy_Rogers0001 8 місяців тому

    2 of my favorites are 7024 and 8018

  • @diymaster101
    @diymaster101 11 місяців тому

    Thanks bro

  • @jacobgunter1517
    @jacobgunter1517 7 місяців тому

    Sorry man im glad your helping newer people but i had a welding class in high school and we trained on 6013, jumped to 7018, and then to 6010 and did all 3 in flat, horizontal, vertical, and overhead. This was in highschool so i was in this class, from when i was 15 to 17 and it was taught better and we all had welds better than that even had bend(destructive) tests for 3g 4g and 5g welds… love that your helping newer welders but when it comes to a weld being right and safe. This isnt it. But running beads this is good

  • @johnmacmillan627
    @johnmacmillan627 3 місяці тому

    Thanks. I see you use an aluminum plate over the welding table when stick welding.

  • @anderson0713
    @anderson0713 11 місяців тому

    So pretty,same laser welding !!!

  • @Fortnite_Show_Down
    @Fortnite_Show_Down 5 місяців тому

    hey im new to welding what is the difference of the red welding rod and grey

  • @eastwood111
    @eastwood111 4 місяці тому +1

    Since I have a cheap inverter stick welder machine, I will take your advice on the 7018AC version. I’ve tried three different types of rods, and it’s nearly impossible to develop an arc. I was able to lay a few welds with some 6013, but it literally took probably 100 attempts to get it to light up and hold an arc.

    • @GuestInvitado-gd3bi
      @GuestInvitado-gd3bi 3 місяці тому +1

      If you're having trouble lighting a 6013, consider using a different welder. Cheers!👍

    • @paddlepower888
      @paddlepower888 6 днів тому

      Has it improved? Don’t give up! The number on the display of some welders has nothing to do with the amps delivered. I often have to turn up the setting on my cheap welder so I can avoid sticking and strike an arc

  • @cognac8297
    @cognac8297 Рік тому

    What rod would I use to weld 3/16 square pipe. Should I start with 70 amps and low watts

  • @fredastaire6156
    @fredastaire6156 9 місяців тому

    Is 7018 1/8" stick good for a fillet weld of 3/16" square tubing to 1/4" flat plate?

  • @Sanus180
    @Sanus180 Рік тому

    @timwelds how long does access to the online course last for when you sign up to the 4 courses???

    • @TimWelds
      @TimWelds  Рік тому

      The courses come with lifetime access so you can work at your own pace and come back to the materials at any time!

  • @hritiksaurmandal
    @hritiksaurmandal Місяць тому

    Which is best rod for galvanized iron (GI)

  • @ryancrazy1
    @ryancrazy1 Рік тому

    I’ve seen other online saying 7018 must be kept in a rod oven or it just won’t work. It seems your opinion is that it’s not necessary for hobby welding?

  • @gcranch9913
    @gcranch9913 Рік тому +1

    What about 6011? We use it for ranch work all the time.

  • @reneguay1347
    @reneguay1347 4 місяці тому

    How does it compare to the 200 amp weldpro

  • @nraynaud
    @nraynaud Місяць тому

    Thank you for the nice video. I'm thinking of buying your course but I'm a bit lazy, is everything metric-compatible in the course or, do I have to use my brain? (e.g. Amps/thou is not a useful unit on my bank of the pond)
    I suggest you copy your answer in the course blurb too :)

    • @TimWelds
      @TimWelds  Місяць тому +1

      Thanks! I have metric units in the courses, but the units aren't really the main point. I teach based on principles so that you can figure out the quantities yourself. If you try them and find that it's not the right fit for you, just send me an email and I'll refund the cost, no hard feelings.

  • @pyrofful
    @pyrofful 11 місяців тому

    Q: Will stick welding be strong enough for my application?
    I want to weld up a seat for my bike for my 60# dog. I will use metal tubes bent to create the back and sides. The bottom will be fastened to my bike rack just the tubular sides will be welded.
    Thanks!

    • @zod-engineering-welding
      @zod-engineering-welding 11 місяців тому

      In general, Stick welding as a welding process can be very strong. Industrial equipment is repaired with stick welding all the time (by professionals). The more important aspects are: operator skill and competency in metal fabrication/engineering design. The strength/resilience of a completed welded project can highly depend on how the joints/geometry of the structure is designed, as well as the quality of the welded portions that tie it all together. So it begs the questions: Do you already know how to stick weld? Are you experienced in metal fabrication? Are you familiar with creating/evaluating the integrity of a concept structure that is to be welded? If all that is new to you, it might be best to seek advice from someone who is familiar with similar type work and possibly get their advice/input. Hope this helps.

  • @elisabethyoung1376
    @elisabethyoung1376 Рік тому +1

    Where can we snag a couple of those sweet hats?

    • @TimWelds
      @TimWelds  Рік тому +2

      That's one of a kind for now; my amazing wife had it made for me for Christmas last year.

  • @mrkonrady22
    @mrkonrady22 Рік тому +4

    Can you dwelve into something like 7016 next time, if possible? 🙌🏻 I bought it once by mistake and have been using it since then, it's just so so so easy to weld with. But in all honesty, if I don't need to, I don't use electrodes at all... 😂 I'm a TIG welder, I like silence and solitude (without sparks) 🤣

    • @TimWelds
      @TimWelds  Рік тому +4

      I’m with you on the TIG. 😃 I’ve honestly never used 7016, but I might check some out.

    • @elkvis
      @elkvis Рік тому +2

      If I'm not mistaken, 7016 is just like 7018, but its flux lacks iron powder, so it doesn't have as high of a deposition rate as 7018.

    • @mrkonrady22
      @mrkonrady22 Рік тому

      @@elkvis May be. It forms glass-like slag that needs to be hammered off, but that's very easy. Also starts and restarts are simple, I've been shocked how good it welds too. The main benefit is precision with which welder can lay it down. It has become my go to electrode for home applications when it's windy or I'm out of flux-core.

    • @miszced
      @miszced Рік тому +2

      Most electrode manufacturers have developed a 7018AC. They are generally featured w/ touch restrike, equivalent deposition rates to std 7018 & easy slag removal with better arc control in positional welding. 7018AC is better on AC (Buzz Boxes*) & may help with arc blow.
      *maybe a better choice of words, Hobbists with low output power sources

  • @psilocin9533
    @psilocin9533 Рік тому

    So ive got a cheap import welder and have had trouble striking and maintaining an arc with 7018, but not 6013.
    Your suggestion of trying a 7018ac rod is something ill try, but im curious as to why having an ac rod would be beneficial? Great vid btw.

    • @TimWelds
      @TimWelds  Рік тому +3

      Thanks! The 7018AC rods are formulated for arc stability to sustain an arc when the AC sine wave is not at it's peak. This can also help with some cheaper inverters. Another issue I've run into with some cheaper inverters is that the output is a bit lower than the readout, so you may just need to crank it up a little higher than expected.

    • @psilocin9533
      @psilocin9533 Рік тому

      @@TimWelds cool man, thanks for the response.

    • @miszced
      @miszced Рік тому

      One obvious benefit to a 7018AC is "touch restrike", liken to the 6013.

  • @jessehouse4791
    @jessehouse4791 Рік тому

    Wouldn't mind seeing you try 5/32 6010+++++

  • @mikecollins8241
    @mikecollins8241 7 місяців тому

    If you have a Buzz Box/ AC machine, use 6011in place of 6010 ;)

  • @zuppam3162
    @zuppam3162 Рік тому +1

    Hi, I'm a newbie in welding. Currently I have a MMA welding machine but want to use this machine for MIG welding. Since my MMA machine Teoritically has 0~120A and its non-load voltage is 100V, then how to reduce the voltage down to 20V for MIG welding? This machine has only 1 amperage regulator knob (0~120A).
    Any help is very appreciated 🙏🏼

    • @TimWelds
      @TimWelds  Рік тому

      Unfortunately, this will probably not work very well. The reason has to do with the fundamental design of power supplies for different welding processes. MMA uses a constant current power supply, where MIG uses a constant voltage supply. The reason for this is that you don't directly control arc lenth with a wire feed process like MIG, so the power supply has to reach a stable point. With a constant voltage supply, power is increased with a short arc length to increase it and is decreased when the arc length is long to reduce it. Thus it will reach a balance point. The MMA power supply will not do this as effectively.

  • @ZILAwelds
    @ZILAwelds Рік тому

    Thar is a nice chipping hammer !!! I have 3 of them

    • @TimWelds
      @TimWelds  Рік тому

      For sure! Sometimes it’s the small things that make life easier.

  • @CoolDude-vc2fl
    @CoolDude-vc2fl 10 місяців тому

    What Rod is good for building Solar Tracker carrying 300Kg of weight? I am a beginner at Arc Welding so i m currently practicing with 6013.

    • @TimWelds
      @TimWelds  10 місяців тому +1

      Honestly you could use almost any rod. If you’re learning 6013, I’d just use that.

  • @-DIYPRO-
    @-DIYPRO- Рік тому +1

    Where do I get the TW hat!?

    • @TimWelds
      @TimWelds  Рік тому

      That's one of a kind for now; my wife got it made for me for Christmas last year.

  • @WeldingForJesus
    @WeldingForJesus Рік тому

    I usually clean the tip of the 7018 with a die grinder before restarting. And hotstart is nice for avoiding welding it stuck to the workpiece.
    But I really prefer the 6013.

  • @nanaklif4973
    @nanaklif4973 Рік тому

    Hello Tim's I still can't access the online class..I've been trying weeks now..

    • @TimWelds
      @TimWelds  Рік тому +2

      Hi Nana, I’m happy to help! I found your account, however it looks like you haven’t purchased any courses yet. I just sent you an email, please reply and let me know how I can help. You can reach me at the contact email any time for quick support with any of these issues. Thanks!

  • @donaldburgess757
    @donaldburgess757 7 місяців тому

    what is best for dune buggy frames or thinner Guage metal as for welder and welder sticks

  • @AerialLensVideo
    @AerialLensVideo 11 місяців тому

    GREAT video as always, but I have a question about 7018 (DCEN).
    Bottom line, why might it be so EXTREMELY DIFFICULT START, even with new rods on very clean metal? You start it like the Pro here (of course), but for me and some others it is by far the the most difficult rod to use, even brand new. My machine has an "arc force" setting which is poorly explained in its user manual -- would that be the key? Meantime, I am sticking bad every single time I use 7018 rods. Again, THANKS for your channel and super clear info!

    • @TimWelds
      @TimWelds  11 місяців тому

      Thanks! I would recommend DCEP for 7018. Striking an arc is largely a matter of practice. Arc Force will increase amperage when your arc length becomes short (the machine senses this from a change in voltage, which is proportional to arc length). It doesn’t do much for 7018, but is more helpful on cellulosic rods like 6010/6011. If your machine has a hot start setting, that would help quite a bit.

    • @AerialLensVideo
      @AerialLensVideo 11 місяців тому

      @@TimWelds Thanks! Okay - I meant to say DCEP - but will make sure. To be honest, I do not know if I have Hot Start on my good fancy machine (the manual is not very good in my opinion). It is a YesWelder 250P AC/DC.

    • @lamey99
      @lamey99 8 місяців тому +1

      When I first started learning to weld, I got rod 7018 stuck 9 times outta 10... Ugh😢

    • @AerialLensVideo
      @AerialLensVideo 8 місяців тому +1

      99 out of 100 here - not exaggerating! Still true. @@lamey99

    • @tomsutlick8902
      @tomsutlick8902 8 місяців тому +1

      That’s why they call it stick

  • @2035jim
    @2035jim 10 місяців тому

    That’s why I don’t like 6010 it loves to stick when it’s brand new once it burns back a but your good to go I always run it at 85 amps I find it melts fast at 90

  • @ryancrazy1
    @ryancrazy1 Рік тому

    where can i find a aluminum plate like that? im checking onlinemetals and a .5" 24x24" 6061 plate is $300+ does that sound about right?

    • @TimWelds
      @TimWelds  Рік тому

      Material prices have skyrocketed since a few years ago, so that could definitely be their price, but I don’t buy a lot of thick plate, so I’m not sure. I’d shop it around a little, check with local shops and maybe go a bit thinner/smaller if that would serve your purpose.

  • @emanuelorozco1439
    @emanuelorozco1439 10 місяців тому

    Would a stick welder be good for automotive stuff? Like if I was welding a floor pan or fixing rust. My car is from 1966 so I think the sheet metal is thicker than modern cars. But idk if it’s possible

    • @kls2020
      @kls2020 8 місяців тому

      there are video's on youtube of guys using small 6013 electrodes for what you're
      asking about .

    • @luciusirving5926
      @luciusirving5926 8 місяців тому

      I prefer 6011 on cars. Especially on vintage stuff and 6011 cleans everything.

  • @johnpapa8681
    @johnpapa8681 Рік тому

    I like 6013 on clean metal.

  • @Stewartlearnstoweld
    @Stewartlearnstoweld Рік тому

    Hey bud are you still running your courses if so is there still availablity

    • @TimWelds
      @TimWelds  Рік тому

      Thanks for your interest in the courses! Yes. The courses are online and you work at your own pace. The one-time course purchase gives you lifetime access, so you can go back and review the lessons and exercises anytime. Check them out at courses.timwelds.com.

  • @morganchandler5126
    @morganchandler5126 2 місяці тому

    The slag will roll up behind a 7018 if done correctly

    • @TimWelds
      @TimWelds  2 місяці тому

      Not always, it depends a lot on the brand

  • @normpage4604
    @normpage4604 5 місяців тому

    10 , a DC reverse ONLY rod , ! Is the best shit since sliced bread..

  • @jdcoverland365
    @jdcoverland365 Рік тому +1

    6010 rods. I found out that if you dampen the rods you can reduce splatter. Working underground, 6010 has it uses. I prefer 7018.

    • @TimWelds
      @TimWelds  Рік тому

      Thanks! When I went to welding school, they actually had us dip our 6010 rods to help them maintain an arc with their early generation inverter machines...turns out there's a background setting that just needed to be changed, but no one realized that at the time. I haven't tried it since then or compared the spatter, that'll be an interesting experiment.

    • @jdcoverland365
      @jdcoverland365 Рік тому

      @@TimWelds Thank you for the reply.

  • @ryancrazy1
    @ryancrazy1 Рік тому

    How thick is the Aluminum Plate you are using? Trying to find one

    • @TimWelds
      @TimWelds  Рік тому

      It’s 3/8” thick. Depending on what you’re doing, 1/4” could be fine. If you’re welding steel, a steel plate would be fine as well. The one I have is just a random size drop remnant that I happened upon for 25 bucks a few years ago. You can order one from an online supplier, but it’s probably worth calling a few local metal suppliers or fab shops to see if they’d sell you a rem that’s around what you’re looking for.

    • @ryancrazy1
      @ryancrazy1 Рік тому

      @@TimWelds wow only 3/8? i was guessing 5/8

    • @TimWelds
      @TimWelds  Рік тому

      I came across this one from Justin’s (the fabrication series) store. weldmetalsonline.com/products/bench-top-welding-plate
      It’s a bit thinner, but seems like a decent price if you’re still looking. I have a discount code there ‘TimWelds’ that can save a few bucks.

    • @ryancrazy1
      @ryancrazy1 Рік тому

      @@TimWelds sweet. I’ll check it out. Thanks!

  • @hinz1
    @hinz1 Рік тому

    7018, welds easily. Good quality 6013 is fine, too. Anything with cellulose is just nasty and difficult to use, simply switch to TIG if I need a good root.
    From my experience, you just have to try the electrodes, some make better ones, some are worse. 6013 from company A doesn't weld as nice as other pack from company B.

  • @mikew8622
    @mikew8622 Рік тому

    Turn your heat down 5. I'd like to see the back side. I whip fast with slightly higher acr length and it looks like 7018.

    • @TimWelds
      @TimWelds  Рік тому +1

      Thanks! I'll give that a try. It was definitely roasting that 1/8" plate by the end of the run.

    • @mikew8622
      @mikew8622 Рік тому

      @TimWelds might take a few tries but you'll get it. Shouldn't be any blistering at all on the back side. You can do it vertices up as well

  • @donaldburgess757
    @donaldburgess757 7 місяців тому

    no curly ,zigzag patterns type

  • @johncimino7015
    @johncimino7015 Місяць тому

    Are these courses for the beginner?

    • @TimWelds
      @TimWelds  Місяць тому

      Yes, they’re built specifically for beginners. 👍

  • @jaydaplug3906
    @jaydaplug3906 7 місяців тому

    you can just bang the stick once on the table and it will come off 4:43

  • @OldGuy70s
    @OldGuy70s 8 місяців тому

    i noticed tht 6013 & 7014 welded thru paint & rust also................

  • @jamescromwell3583
    @jamescromwell3583 9 місяців тому

    How do u weld in dat position

    • @tomvana4270
      @tomvana4270 7 місяців тому

      Dat? Lemme axe you a question. Wha u meen by dat?

  • @rickshuler9355
    @rickshuler9355 Рік тому

    Those red 6010s are reverse polarity rods

    • @TimWelds
      @TimWelds  Рік тому +1

      Thanks! I was running reverse polarity (DCEP) for all of the welds.

    • @rickshuler9355
      @rickshuler9355 Рік тому

      Aww did not know that's what that meant Dcep. Bought them several times and wondered why they splattered so bad discovered it that way lol

  • @richmac918
    @richmac918 Рік тому +3

    I use all of them but my favorite is one no one uses anymore - 7024. Big fat rod, great looking weld, slag just peels off. Not the best for everything but for a lot of the stuff around my house I love it.

    • @miszced
      @miszced Рік тому +1

      Fully & 110% agree. Great for fillet welds & downhand (flat) welds. It's also called a dummy rod. You just couldn't go wrong with it.

  • @jackbounder6374
    @jackbounder6374 6 місяців тому

    Been forever since Vo-Tec lol so I have not Welded for decades. I am probably 100% wrong but don't they call a 70/18 Rod a "Jet Rod" as well?
    Again I'm probably wrong I'm just curious. Also you Weld well past a Pro smh some guy's just find what they are perfect at then run with it. Sadly I'm not one of those Guys LOL.

  • @mactheplumber3839
    @mactheplumber3839 8 місяців тому

    7018 CAN peel the slag. You just gotta have your settings and technique on point

    • @TimWelds
      @TimWelds  8 місяців тому

      I don’t think I said it can’t, 7018 is probably the best peeling rod out there. It depends a lot on the brand of rod, joint type and position as well. You can have a completely acceptable weld that isn’t a peeler.

  • @aljock6927
    @aljock6927 6 місяців тому

    There is no comparison structural Rod versus fill rod

  • @aaronrodriguez1384
    @aaronrodriguez1384 10 місяців тому

    Run off tabs would be to use

  • @markgilbaldestoy8442
    @markgilbaldestoy8442 6 місяців тому

    🎉

  • @TheDuckofDoom.
    @TheDuckofDoom. 9 днів тому

    7018 should really be called hydrogen sensitive rather than low hydrogen.

  • @rikmuao4699
    @rikmuao4699 Рік тому

    Just tap the 7018 on a flat surface after you run your first bead. No need to clean up the tip with a hammer ect ect.