Dyna low rider s bike breakdown and Issues!
Вставка
- Опубліковано 27 сер 2024
- We have dropped a bunch of information relating to all dynas and harleys
If you have a harley or a dyna this is a must watch!
FXDLS mods as below!
Legend front fork inserts
With gold cce tubes
Legend 14” gold rear shocks
Saddelman diamond stitch seat
Hard case 7inch risers with rental bars
Day maker led headlight
Tbr megaphone 2/1 exhaust
Screaming eagle 259 cams
Crane cams roller rockers
10.5:1 SE pistons 10 thou o/s 30 thou h/g
Tuned at HH 116hp - 134ft
Rocker locker kit
Rizoma rear indicators
Led front indicators
Flush mount led gauges & fuel filler
Thrashin supply seat bolt
Thrashin supply selector rod
Genuine long guard
Letric lighting led brake light / plate light
Custom cycles plate holder
Flo pegs
Galfers discs - Розваги
Great bike mate, I had a 2012 Fat Bob Dyna it done a rear wheel bearing & front engine mount i traded up to a 2015 Wide Glide put a stage 4 in it with a D and D Bobcat Exhaust progressives springs in front & YSS 12i1/2 inch on rear handled pretty good then done another front engine mount so i installed a Sputhe Stabiliser it made the bike handle like it was on rails but didn't do another engine mount in 10, 000 km up until i traded the bike on a Bagger. I didn't ride the bike as hard as you do but i still gave it a hard time & went on some long runs with it, wish i still had it ,good luck with the channel see you out there sometime
@@mykol1842 those rear wheel bearings can be annoying! Awesome sounds like a fair handful! Thanks for watching and commenting :)
Been watching few of ya vids. Good to see some Adelaide boys doin it. I ride a victory highball these days had a sporty and fxr. If i see yous out in the hill i eill pull up. Cheers
@@HamosOutdoors that’s the go yea for sure make sure to come say hi 🤟🏼
I have the trashin 6.5 inch pullback , its great !
@@ricardokenneth5792 something I’ve even looked at for the dyna! Once I get a couple other things done I will come back to the riders and probably do the same !
Great video
@@AdamHaughton-py4gh appreciate the support
Also have hp plus lifters i had the same issue with the stock lifters with the mods. I think they are fueling hp+.
I have a 2017 FXDLS 10:5:1 compression fueling 594 cams screamin eagle mva heads bassani road rage exhaust bigger injectors av&v valve springs. Im only making 105 hp and 115 torque.
@@racex3721 yea nice mate, all depends on each dyno with how much you’ll be making
Very nice
Thank you 🤝🏼