Great video mate can't wait to hear and see how they run on your truck...cant wait to see what's in the RBR/C box too haha...good work mate keep it going
Tip bro take the 4 screws that hold the axle to the brige. Put the screw thur axle into the brige .then the cap that the screws go into.make axles swaps way easer . More claerncs
Didn't even know that Portals existed for these! I just started with WPL... (but have been in RC since 1983!) HOPING to find some spot to run them in Tucson. NOT a RC friendly town. 😖
Mano tenho uma wpl só que ela tá igual de fábrica ainda, como fasso pra deixar ela assim larga e flexível igual a sua ?? Quais peças trocar ? E peças de qual carro tenho que colocar nelas ?? Sonho deixar ela assim flexível e larga igual a sua top demais ❤️🙏🏼🙏🏼
If you have two of these portal axle kits you can convert the B16 to portal 6wd, but there needs to be some mad scientist shiz to get the setup right. These lil portal axles are tight!!
yes they break half way up round the bearing cup. when upgrading to portal axles you should really get the alloy c hub upgrade at the same time . even the 4x4 kits . order metal portal axles upgrade . metal servo the bigger 360? motor make your own metal links get the softer tyres with side wall grip . get all new hardware (nuts & bolts ) in 2.5m i went overboard and made everything in titanium lol it is nice
Hi I have got the same axles I have put them on truck I'm using a 2 speed gearbox but the front wheels are running backwards am I doing something wrong Thanks Paul.
Your going to have to flip the orientation of the front axle so the pumpkin is on the opposite side than it is now. That will have the axle spinning the right way.
great, but concerning the lift it's a bit too much or u should put bigger wheels on it. that only my opinion. nice to see it's getting used as it should ...
I got them on Amazon. Just search wpl portal axles. I can't place a link to where I got it because they no longer sell these on there store. And when I placed a link to a store that store sold put too so the link was useless in the end lol.
Enjoy you always being optimistic, great refresh for the OG WPL truck and awesome you really see the miles on the truck. Thank you.
Still runs great. My camp site basher
Thanks for the post. I haven't looked at mine in almost 2 years and have been building mine since I saw your give away build.
Right on! Get that rig back on some trails!
I'm posting a video later today on my c14. I really need a set of these so mine will drive with the upgraded tires I bought. Should be a funny sight
What are they called I wanna buy a pair
Great video mate can't wait to hear and see how they run on your truck...cant wait to see what's in the RBR/C box too haha...good work mate keep it going
Tha c 24 is one of the best bulid i have seen on UA-cam👍 love it
Its been mostly a good truck for my adventures. It did start life as a kit with plastic gears to this.
That's the first set of driveshafts I have seen more worn than mine! Well done on getting out and running that RC brother. Great content as always.
this is my runner for sure. Gets out a lot because I genuinely enjoy it and it was my first wpl build ever.
Tip bro take the 4 screws that hold the axle to the brige. Put the screw thur axle into the brige .then the cap that the screws go into.make axles swaps way easer . More claerncs
Didn't even know that Portals existed for these! I just started with WPL... (but have been in RC since 1983!) HOPING to find some spot to run them in Tucson. NOT a RC friendly town. 😖
I assume you can run them on your local hiking trails. Always find great terrain that way. Just bring extra batteries.
Thanks for the vídeo 👍🤜
Thanks for stopping by!
Wow nice vidio👍👌😍
thanks I appreciate it!
The upgrades never stop lol.
never does hahaha
Creative bro ..
Thank you! Cheers!
👍 Now to see how it does 🤞
Mano tenho uma wpl só que ela tá igual de fábrica ainda, como fasso pra deixar ela assim larga e flexível igual a sua ?? Quais peças trocar ? E peças de qual carro tenho que colocar nelas ?? Sonho deixar ela assim flexível e larga igual a sua top demais ❤️🙏🏼🙏🏼
Wax works better than grease on tge screws. Especially beeswax, because it then acts as a bit of a thread locker
for sure that works too!
Nice Video👍
If you have two of these portal axle kits you can convert the B16 to portal 6wd, but there needs to be some mad scientist shiz to get the setup right. These lil portal axles are tight!!
It would definitely benefit the military trucks to have portals because the gearboxes are low.
@@RunThatRC I jus need to fine tune or file away and get alignment tighter. Love tha channel, you rock!
I seen some metal c hubs for these portals the other day. All I hear is about the plastic breaking.
When they break I'll repair them and look into the metal hubs for sure.
yes they break half way up round the bearing cup. when upgrading to portal axles you should really get the alloy c hub upgrade at the same time . even the 4x4 kits . order metal portal axles upgrade . metal servo the bigger 360? motor make your own metal links get the softer tyres with side wall grip . get all new hardware (nuts & bolts ) in 2.5m i went overboard and made everything in titanium lol it is nice
I saw a full metal portal axle set in China costs around USD25
nice!
good very simple🇲🇾👍😍😊
😁😁👍👍
Hi I have got the same axles I have put them on truck I'm using a 2 speed gearbox but the front wheels are running backwards am I doing something wrong Thanks Paul.
Your going to have to flip the orientation of the front axle so the pumpkin is on the opposite side than it is now. That will have the axle spinning the right way.
OK thank you it was giving me a headache. Love the chanel great vids.
@@paulbird5088 thanks I appreciate it!
But if you flip the orientation of the pumpkin it will make the suspension lower in the front
great, but concerning the lift it's a bit too much or u should put bigger wheels on it. that only my opinion. nice to see it's getting used as it should ...
definitely can run bigger tires with the lift or just lower it a bit for better weight distribution (less tippy).
@@RunThatRC yes, people often make them stand to high, but it just looks funny, like on stools. not scale ...
video is now up if you were interested
First!
What wheels are those? I would love to have me some of those😍
If you have a 3d printer they are method wheels 3d printed with a file from thingiverse.
@@RunThatRC Dang, don't have one 3D Printer but, thanks for answering🤙
What are the portals called I want to buy them for my c-24
amzn.to/3yd3qGm
Thanks man
no problem brotha!
I installed these, and the rear axle turns in reverse while the front axles are moving forward ..wy is that?
you need to flip one axle so it spins in the right direction. One of the axles just needs to be installed with the diff cover offset from each other.
I ended up taking the rear diff cover off flipping the gear around to the other side . Now it turns in the direction that it should thanks
What size Phillips screws come with the wpl c24
not sure but I use a p01 on mine and others that work.
Does it still flex good
we will find out soon!
I can put portal axle in original suspension links?
yes you can use the portal axle as an upgrade. It will bolt up to the original links.
@@RunThatRC thanks bro, love your channel
@luiz4x2 appreciate it brotha!
How many meters between the control and the cart?
this is not a ready to run. I built this one with my own electronics. Im using a flysky gt3c and it has ridiculous range.
Could you please share the link of this portal axial
I got them on Amazon. Just search wpl portal axles. I can't place a link to where I got it because they no longer sell these on there store. And when I placed a link to a store that store sold put too so the link was useless in the end lol.
Do they have metal portals?
I think they might. I haven't looked myself.
Them plastic portals brake so easy killed 2 sets of them with in a day
been hearing and believe all the stories. Mine came pre broken for me lol.