"Soundproof: Sealing Studio Doors with Rubber Draught Excluders" - DIY Acoustic & Thermal Insulation
Вставка
- Опубліковано 12 вер 2024
- 0.:00 Retrofitting Draught Excluders (Indoor Weather & Interior Surround/Around Door Seals)
0:19 Outdoor Exterior Garage Door
0:23 Exitex Rain deflector Bar Aluminium (20 Weather Board Drip Door)
0:40 Weather Deflecting end caps
0:50 Door Purpose (Inward facing Vs. Outdoor)
0:60 Exitex Low Height Threshold (Inward) MDS80 (Exterior)
1:10 Rear Thermal Barrier (Exterior)
1:20 Other Attributes (Rear Thermal Barrier)
1:56 Rain Deflector & Threshold Benefits
2:20 Draught Excluders (Deflector & Threshold) Vs. Fit for Purpose
2:45 Draught Excluders Benefits
3:10 Draught Excluder Types
3:27 Draught Excluder Installation (Interior Door)
3:32 Storm Guard Heavy Duty (Around Door) Seal Aluminium (Interior Doors)
3:48 Garage Door Rubber Seal (Interior /Exterior)
3:50 Open Storm Guard & Garage Seals Packaging
3:56 Garage Seal Parts List & Door Locus
4:20 Storm Guard Parts List & Door Locus
5:00 Storm Guard Straight & Curved Rubber
5:08 Curved Rubber Vs. Hinges Locus
5:13 Straight Rubber Vs. Strike Plate/Top Locus
5:18 Rubber profile orientation
5:30 Door Measurements & Seal Cut Tool Selection
5:40 Hack Saw Tool Selection (TPI)
6:07 Hack Saw Selection
6:19 Tool Kit for Draught Aluminium Cut & Assembly
6:45 Measure Interior Door Lengths, Sides & Top
7:00 Click Description link for Around Door Seal Assembly
7:20 Storm Guard Heavy Duty Garage Door Assembly
7:28 Measure Door Bottom Width & Gap
7:40 Cut Al Bar in line with Door Bottom
8:13 Cut Excess Rubber in line with Al Bar & Door Bottom
8:20 Line up & Mark up Al Bar on Door Bottom
8:30 Pilot, Final Size Hole positions on Door Bottom Al Seal
8:40 Assemble & Screw Aluminium Seal to Door Bottom
8:53 Pinch & apply Industrial Glue & Locktite to Al Seal Edges (Optional)
9:30 Reassemble after Pinch Application
9:34 Test installation Assembly
9:45 Repeat Cut, Line up, Markup for Adjacent side of Door Bottom Al Seal
10:20 Repeat Pilot, Final size Drill & Screw Install for Adjacent Bottom Seal
10:25 Adjacent Side Door Bottom Al Seal Safety Hazard
10:46 Corrective action :Al Seal excess length & Safety Hazard
11:58 Opening more Holes on Aluminium Strip
12:08 Pilot & Opening Final Hole Sizes (Round & Oval Holes)
Useful links
"Quick Fix: How to Tighten a Loose Hacksaw Wing Nut & Replace the Blade" - Hacksaw Maintenance
• "Quick Fix: How to Tig...
"Quick & Easy DIY Hacks: Perfectly Cut & Drill Aluminium Rubber Seal Draught Excluder Strips"
• "Quick & Easy DIY Hack...
"Soundproof: Sealing Studio Doors with Rubber Draught Excluders" - DIY Acoustic & Thermal Insulation
• "Soundproof: Sealing S...
"Soundproof & Insulate: Seal Your Door with Rubber Draught Excluders for Perfect Acoustic Insulation
• "Soundproof & Insulate...
"Keep Warm & Save Energy: "Retrofit Rubber Draught Excluders & Weather Seals for Cozy Interiors"
• "Keep Warm & Save Ener...
"Quick & Easy: Removing and Replacing a Door Handle (Lever on Rose)" - Step-by-Step Guide
• "Quick & Easy: Removin...
"Top Tips to Avoid Electrocution & Perfectly Hang Picture Frames - DIY Safety Guide
• Hang Picture Frames Li...