I updated the throttle on my nami with the polish finger throttle. Much better!! When im hoping over small bumps i jave my thumb securely around the handlebar. Tough to lift the scooter with stock thumb throttle and its sketchy at higher speeds imo.
Don't Nami have regen brakes? My '23 Apollo Phantom (2800kms) has regen brakes & though I installed hydraulic disk brakes, I think I've used them about 3 times. Love & miss Dublin! Didn't know a scooter that nice was legal there. I put a Samsung Tag2 in my scooter & just use a bike lock otherwise. I'm near Halifax, Nova Scotia, east coast of Canada. I've been considering getting a Nami BurnE2 Max now that their batteries are UL certified. I'd rather the Apollo Pro's 12" tires and IP66, but the Nami performs SO much better Not really necessary, but for that investment, yes. I really hate the stock throttle on the Nami. Good job replacing the trigger throttle with a proper one. The cheap trigger throttle on the Nami belongs on $600 scooters, not a $6000 one (CDN $).
Don't get the teverun 7260R because it's not sturdy going above 40 mph. Maybe because of the 13 or 14 inch wheels on a small frame. Might have defective RGB lighting tubes that's the most common issue people have with teverun scooters. I had that happen to my teverun supreme and also the pin folding mechanism on my supreme has snapped like 3 times. That's why I didn't buy the dualtron thunder 3 because has same folding lock mechanism design like my supreme a stinking skinny pin that can snap in half.
I had already Nami beofre I find out about their problems. I said I'll never again buy Nami until they start treating customers like professional company, and once that happens, I'll make a video about it. I'm still hoping they'll change the way they operate so I can finally make video about it.
@@escootIrelandI saw there was a steel stem for the bottom portion of the wheel now. Do you think that will make a difference? It said the first model was aluminum. And people are already ordering steel stem from Michael sha and fixing it. Many the old models were the ones breaking and that steel won’t? Any thoughts. I’m Considering buy with steel wheel stem
@escootIreland Would you recommend Nami Burn E2 base or Dualtron Thunder or Emove Cruiser V2, I've been thinking about buying emove cruiser v2 the price tag is lower than these 2, has amazing 60 mile range, slightly lower top speed but lots of easier to modify parts.
I updated the throttle on my nami with the polish finger throttle. Much better!! When im hoping over small bumps i jave my thumb securely around the handlebar. Tough to lift the scooter with stock thumb throttle and its sketchy at higher speeds imo.
Yeah, stock one is nightmare, to be honest.
Don't Nami have regen brakes? My '23 Apollo Phantom (2800kms) has regen brakes & though I installed hydraulic disk brakes, I think I've used them about 3 times. Love & miss Dublin! Didn't know a scooter that nice was legal there.
I put a Samsung Tag2 in my scooter & just use a bike lock otherwise. I'm near Halifax, Nova Scotia, east coast of Canada. I've been considering getting a Nami BurnE2 Max now that their batteries are UL certified. I'd rather the Apollo Pro's 12" tires and IP66, but the Nami performs SO much better Not really necessary, but for that investment, yes. I really hate the stock throttle on the Nami. Good job replacing the trigger throttle with a proper one. The cheap trigger throttle on the Nami belongs on $600 scooters, not a $6000 one (CDN $).
What smart bms did you install it to your Burn e2 max?
I honestly dont remember. I'd need to check purchasing history.
@@escootIreland let us know!
Don't get the teverun 7260R because it's not sturdy going above 40 mph. Maybe because of the 13 or 14 inch wheels on a small frame. Might have defective RGB lighting tubes that's the most common issue people have with teverun scooters. I had that happen to my teverun supreme and also the pin folding mechanism on my supreme has snapped like 3 times. That's why I didn't buy the dualtron thunder 3 because has same folding lock mechanism design like my supreme a stinking skinny pin that can snap in half.
Yeah, I wasn't planning on getting it, but I might make a video about Teverun. Thank you for watching and info provided.
Didn't you say that you will never get Nami?
I had already Nami beofre I find out about their problems. I said I'll never again buy Nami until they start treating customers like professional company, and once that happens, I'll make a video about it. I'm still hoping they'll change the way they operate so I can finally make video about it.
What about the risk of scooter snapping? You still ride?
I want a nami but don’t want it to snap
@dannyalvarez7783 I hardly use mine anymore, and it's actually on sale now.
@@escootIrelandI saw there was a steel stem for the bottom portion of the wheel now. Do you think that will make a difference? It said the first model was aluminum. And people are already ordering steel stem from Michael sha and fixing it. Many the old models were the ones breaking and that steel won’t? Any thoughts. I’m Considering buy with steel wheel stem
@escootIreland Would you recommend Nami Burn E2 base or Dualtron Thunder or Emove Cruiser V2, I've been thinking about buying emove cruiser v2 the price tag is lower than these 2, has amazing 60 mile range, slightly lower top speed but lots of easier to modify parts.