@WelfareWagonRepairs Does ur Amber reflectors that’s on the side of ur headlights, are also have a T10 behind the lens? If so, I think that one needs to be lit up too.
Yes, I have amber reflectors that light up. Mine are working. They are parking lights and not turn signals. What part of the video are you asking about?
@@welfarewagonrepairs the side amber reflectors on the headlights lol. I just want to make sure if they are have T10 behind the amber lens. Because usually if they do, an Amber reflector would have a small square shaped hole to expose the amber light. And this one doesn’t.
@@toyotabrony they do you can see it lit up at the 15:33 mark in my led headlight install video ua-cam.com/video/ZsYM32CECrY/v-deo.htmlsi=Lv91JrWs0Q0o5gze?t=933
@@welfarewagonrepairs it looks more like it’s glowing next to it. I know those are turn signals. I kinda see it barely lights up. That’s incandescent right?
@@toyotabrony it should be an led and it is fairly bright. It just doesn’t appear so because the garage is well lit. The turn signal is a yellow bulb that is next to the headlight it is completely seperate
@WelfareWagonRepairs Could u tell me where’s the oem flasher relay locate? Hopefully it’s not mount behind the gauge cluster. And hopefully it’s an easy swap that’s under the steering wheel or somewhere.
I don’t believe we have a flasher relay. I believe we have a normal relay that the computer will turn on and off to make the light flash. What are you trying to do?
@@welfarewagonrepairs in short, when we change from incandescent turn signal bulbs to led. For example, switch from oem Sylvania incandescent turn signal bulbs to Sylvania zevo amber led turn a signal bulbs. With lower wattage, it hyperflashes. So instead of putting load equalizer resistors, we swap from oem flasher relay to LED flasher relay. To stop the hyperflash. A much better approach and more refine to swap it.
@@welfarewagonrepairs I have seen so many led turn signals on any vehicle. Even on that Mitsubishi. I already bought sylvania zevo 1156 Amber led bulbs for my friend’s 2014 Mitsubishi mirage hatchback. As his birthday gift. Of course slapping a led will hyperflash. So instead, I order the alla lighting - load equalizer resistor with 1156 connectors as a plug and play version.
@@welfarewagonrepairs I did that on the 2017 Toyota sienna le with sylvania zevo LED’s. 3157 and 7440. I did bought the Novita led flasher relay. Because of it course it was hyperflashing. But I realize after inspecting the clicking sound of the turn signals. It’s locate behind the guage cluster. Instead of u see the steering wheel. Pretty dumb thing they relocate that relay.
I have a question. Do you have any problems with the exhaust rattling? My exhaust is making a crazy tapping noise. It sounds like engine has blown up. I can't tell where the noise is coming from but I have determined that it is the exhaust.
I have this problem right now, at 1500 rpm my exhaust makes a loud rattling noise. I imagine it’s probably the heat shield breaking due to rust and rattling against the muffler as the sound changes with the wind direction. It may also be internal to the muffler. I will be having it looked at later this week. I find it funny that for me the rattle only occurs at 1500rpm no more, no less
@@w1zard0f0h haha yeah I also have a rear brake squeak because I bought non oem shoes and my serpentine belt is slipping and squeaking. If it’s still under warranty for you maybe this is covered under the power train warranty im not too sure.
@@welfarewagonrepairs Mine is a 2018. It still may be covered. I'll have to check. Please make a video when you find out what it is. I'll comment if I find out first. Thank you.
If you have the top trim then you get lights in the mirror caps instead of the fenders. I’m unsure if You would still have the wiring for the fender lights
Please keep the video coming for the Mirage ..love it..
Thank you for watching!
I added those to my 2022 a few weeks ago. Much nicer than stock!
I Agree! Thank you for watching
@WelfareWagonRepairs
Does ur Amber reflectors that’s on the side of ur headlights, are also have a T10 behind the lens?
If so, I think that one needs to be lit up too.
Yes, I have amber reflectors that light up. Mine are working. They are parking lights and not turn signals. What part of the video are you asking about?
@@welfarewagonrepairs the side amber reflectors on the headlights lol.
I just want to make sure if they are have T10 behind the amber lens. Because usually if they do, an Amber reflector would have a small square shaped hole to expose the amber light. And this one doesn’t.
@@toyotabrony they do you can see it lit up at the 15:33 mark in my led headlight install video ua-cam.com/video/ZsYM32CECrY/v-deo.htmlsi=Lv91JrWs0Q0o5gze?t=933
@@welfarewagonrepairs it looks more like it’s glowing next to it. I know those are turn signals. I kinda see it barely lights up. That’s incandescent right?
@@toyotabrony it should be an led and it is fairly bright. It just doesn’t appear so because the garage is well lit. The turn signal is a yellow bulb that is next to the headlight it is completely seperate
😍🔥🔥
@WelfareWagonRepairs
Could u tell me where’s the oem flasher relay locate?
Hopefully it’s not mount behind the gauge cluster. And hopefully it’s an easy swap that’s under the steering wheel or somewhere.
I don’t believe we have a flasher relay. I believe we have a normal relay that the computer will turn on and off to make the light flash. What are you trying to do?
@@welfarewagonrepairs in short, when we change from incandescent turn signal bulbs to led. For example, switch from oem Sylvania incandescent turn signal bulbs to Sylvania zevo amber led turn a signal bulbs.
With lower wattage, it hyperflashes.
So instead of putting load equalizer resistors, we swap from oem flasher relay to LED flasher relay. To stop the hyperflash.
A much better approach and more refine to swap it.
@@toyotabrony have you actually tried it and noticed the hyper flash on this car? I have never tried led turn signals.
@@welfarewagonrepairs I have seen so many led turn signals on any vehicle.
Even on that Mitsubishi.
I already bought sylvania zevo 1156 Amber led bulbs for my friend’s 2014 Mitsubishi mirage hatchback. As his birthday gift. Of course slapping a led will hyperflash. So instead, I order the alla lighting - load equalizer resistor with 1156 connectors as a plug and play version.
@@welfarewagonrepairs I did that on the 2017 Toyota sienna le with sylvania zevo LED’s. 3157 and 7440. I did bought the Novita led flasher relay. Because of it course it was hyperflashing. But I realize after inspecting the clicking sound of the turn signals. It’s locate behind the guage cluster. Instead of u see the steering wheel. Pretty dumb thing they relocate that relay.
I have a question. Do you have any problems with the exhaust rattling? My exhaust is making a crazy tapping noise. It sounds like engine has blown up. I can't tell where the noise is coming from but I have determined that it is the exhaust.
I have this problem right now, at 1500 rpm my exhaust makes a loud rattling noise. I imagine it’s probably the heat shield breaking due to rust and rattling against the muffler as the sound changes with the wind direction. It may also be internal to the muffler. I will be having it looked at later this week. I find it funny that for me the rattle only occurs at 1500rpm no more, no less
@@welfarewagonrepairs That is exactly what mine is doing. It sounds horrible inside.
@@w1zard0f0h haha yeah I also have a rear brake squeak because I bought non oem shoes and my serpentine belt is slipping and squeaking. If it’s still under warranty for you maybe this is covered under the power train warranty im not too sure.
@@welfarewagonrepairs Mine is a 2018. It still may be covered. I'll have to check. Please make a video when you find out what it is. I'll comment if I find out first. Thank you.
It's the heat sheild under the the driver's seat. The screws holding it on came out. I just bent it out of the way a little bit and it's fine now.
my 2018 doesn't have a light there, only a polished cover... I would like to install lights there. I'll pop it off and see if the connector is there
If you have the top trim then you get lights in the mirror caps instead of the fenders. I’m unsure if You would still have the wiring for the fender lights
for sure there is a ready cable there
おー！(•‿•)
俺も交換したいと思ってた！
やってみようかな。
where can i get the light?
Mine was from Aliexpresss. A link where I purchased it is in the description but I believe is no longer working.