Installing New Drag Pack - MTs & 17 Inch Race Stars Wheels
Вставка
- Опубліковано 30 вер 2024
- In This Video I install a new set of wheels to get ready for the 2018 Drag Racing Season. The wheels are 17" Race Star Bracket Racers - 4.5" Wide Up Front & 10.5 Wide In The Rear. Mickey Thompson Street R 305/45-17 Drag Radials in the Rear and Mickey Thompson Sportsman S/R Tires Up Front 28x6.00x17 - Part Numbers For Tires Below - These Will Be Approx. 28" In Diameter After Installation.
Front:
Sportsman S/R 28x6-17 Radial Blackwall
Mickey Thompson Part #90000020408
Rear:
ET Street R P305/45-17 Radial R2 Compound Blackwall
Mickey Thompson Part #90000024660
My 18" MT et street r's took quite a bit of weights to get them balanced. I've heard this is normal with MT drag radials.
I think you'll pick up a couple tenths with this setup. 7.2X.........
I could handle that !!
Can't you install wheel sensors with them ? Cuz you'll have the tire pressure light on without sensors.
Sure you can, you will just need metal valve stems and the correct sensors. I did not install sensors for my application.
Hey Frank - great install video!
I noticed the SRI Denver in the credits.
Are you near Denver?
Also will you be at Zmax on Friday?
Yeah I'm not far from Denver and usually go there to buy some parts, race fuel & Nitrous. I like those guys Korey & Don over there are very helpful and they have some hard to find parts. Lots of AN fitting and line. Not going to be at ZMAX Friday but maybe the Silver Diner in Denver Saturday for a car show. I'm waiting for the weather to cool off a bit before dragging again and preparing for the next mod on the Camaro.
Nice - I might have to look them up if they sell any VP E85 for E98- whatever they call it. Driving out to Troutman for E85 gets old quick.
The DA is horrible right now - took my SS to Zmax 2 weeks ago - I'm running a 1/2 second slower - and trapping 7 mph slower.
I have family plans on Saturday - so I won't be at the Diner show.
Anyways - I found your video looking for tips on getting front skinnies mounted - if the timing works out - I hopefully have my setup done for Friday night.
Thats when I noticed the Denver location - I'm down near 16 and 73. Its a small world when you find another UA-camr in your small town.
Check with Korey 704-489-2015, they are open a little later on Tues & Thursday I think til 7pm. They have Sunoco, Renegade & VP fuels. Not sure about the E85. I did get my tires there. Skinnies are fairly easy to mount but mine really need to be balanced bad. Glad to meet another youtube guy.
Did the rears rub or hit the calipers?
No rubbing
You're too far away from your camera for the microphone get an exterior microphone or just a better camera can't hear a fucking thing I was wanting to see all the sizes width and offset so I know what to get for my Challenger
Hi Frank. How did you find the front runners on the freeway/motorway?
Can i youse this tire with slicks o. The back? Drag full slick. ?
I have not used it like that so I can not be sure.
Did you have any issues with your abs light Turing on aswell as your service power steering ?
Having the same issue... did u get it turned off? & how?
Do the front runners fit well with six piston brembos
They fit the stock 4 piston Brembo Calipers. I doubt they will fit with a larger caliper.
Hi Frank did you have to use spacers with front wheels?
No perfect fit. You really don't want to have to use spacers on race wheels. My brakes did not have the roller skates on the pads. If your has those you can change the brake pads or cut them off. Good luck.
@@frankcanora5900 Thank you, Yeah I don't want spacers either hope all is well miss the content hope to see you back at it soon.
@@juanmalave5829 thank you, looking forward to making some runs again with a new cam and converter in the spring.