How to make your DRZ look brand new with a decal set! | DRZ 400SM Rebuild | EP4
Вставка
- Опубліковано 5 гру 2020
- today we make the DRZ400 look amazing!
transforming this formerly tired dirt bike to super killer supermoto
Build List
Description Link
Decals ebay.us/Ebpv9z
Turn Signals ebay.us/6aAPOt
Head light fairing amzn.to/3hUEDQ6
Headlight ebay.us/hRzQXG
Rear Rack amzn.to/2QLvsGM
440 Big bore kit amzn.to/3yA1Lta
Rear brake lines amzn.to/2SlzUMU
Front brake lines amzn.to/2QKoBgP
Mirrors ebay.us/RU4N3b
FCR Carb amzn.to/3ubqssr
Trail tech amzn.to/3oIEG2Z
Thank you very much....I just bought a black DRZ with no stickers and have been looking at that same kit. Well done Sir.
Looks really good brother
Outstanding transformation!
What a great job. It looks fantastic!
Decals looking good! 👌
Thanks pat!
Dude that bike looks great!
Looks great. You should replace that front fender with Acerbis Supermoto Front Fender from Amazon. It’s shorter and more aggressive looking. The best part is that it’s under $30 and makes the bike look a lot better.
😍😍
Hi!
Niceeeeeeee
Not bad will be doin the same this coming Tuesday lol
Heck yeah! Good luck. Heat gun and windex really make a difference. Let me know how it goes
I picked up one of the headlights you used, how’d you end up mounting it to the bracket
Did the decal kit not have a decal for the front fender? Or did you just intentionally leave the decal off of the front fender?
How are the decals holding up? I just bought the same ones for my drz.
I got my bike taken apart as im repainting alot of the bikr and afding a few things to have it fixed up for the summer. I like how they look on your bike so i bought the same ones lol where did you get the decals for the wheels?
Decals are holding up so well! I’ve taken it off-road several times now and even to the track. Been dropped a couple times and still looks great. The wheel decals are another story. They don’t like sand and dirt for obvious reasons. I got the wheel decals on eBay for like $17. If you don’t plan to mash on dirt with them the wheel decals are ok.
Thing looks amazing. quick question, where’d you get the decals on your rim?
amzn.to/3m1QVqv
Here you go man
Hey I was wondering if you had the link to the new headlight ?
If I have some scratches from a low side do you recommend sanding them down and putting the decals over it?
the decal kit is for sure a great option! if that doesnt work a plastics kit isnt too bad
You have a part # for the drz decal kit?
Just ordered the same kit. Windex and water underneath didnt cause the graphic not to stick?
Yup then use an old card and squeegee the water out
Yeah guys you wash the bike after removing decals, then wipe each panel with alcohol as you do each panel. Then spray with windex liberally, apply decal then squeegee the soap out from the center outwards and get a hair dryer and slowly use it to dry and warm and stretch and apply the decal, you can slit the edges in some places to help lay flat. Their wouldn't be bubbles if you do it this way
Where'd you buy your decals where did you buy your headlight
How is it holding up? Also my plastics are White. Would you think it would look good with the same kit but white plastics
I would pick a set that isn’t such a big contrast to your white. I think this one works with black but another subscriber said it looks bad on gray. As far as quality it’s holding up really nicely. Washed it a bunch of times already with no issues
@@ManaMotors thanks man!
@@tegteg798 KalairGFX on Instagram
where did you buy this kit?
@@yaaaserrr scammer
That should’ve only taken a half an hour to do a scan a bunch of bikes and you move that side panel so many times and put your fingerprints on it it probably won’t stick you don’t wanna keep putting your finger oil on the back of those decals I guarantee you that panel is going to come up and peel on the right tank cover need soapy water and heat gun for a man move them squeegee them out heat gun them it’s super easy A little bit of dish soap Soap it up stick it on squeegee out from the center shouldn’t have any bubbles heat gun the edges
Link for headlight?
www.ebay.com/itm/DOT-4x6-LED-Headlight-Projector-Sealed-Beam-for-Suzuki-DRZ400SM-DRZ400S-DRZ400E-/174072810184?_trksid=p2349624.m46890.l49292
I’m no expert but I think you should have cleaned the bike and let it air dry before putting in the decals. It should increase the longevity of them I think.
Clean surface definitely helps! As far as dryness, a good coating of windex was really the key to aligning the decals. Oh and a heat gun!
I have a 2016 DRZ400 it's gray with gold rims that would look good on my bike you say you ordered them from eBay can you give me an order number off of eBay so I can get that same color
These are Factory Efx Inc graphics.
That gray looks nothing like the 2020 lol I bought this kit and it’s such a different grey it looks bad on a grey bike
Are you still happy with them ?
yes absolutely! only thing is the rim tape, ive taken the bike on some dirt trails and the rim tape look like crap now