Tamiya TT01 Tuning Session Tips
Вставка
- Опубліковано 3 жов 2024
- Finding a better setup with 1) new traction compound formula, 2) front diff, 3) springs/shocks/angle, 4) hex shims. After 7 hours found 0.3s improvement in low grip and 0.1s in medium/high grip track condition.
Gold R/C Traction Compound (non-toxic) - / goldtc
#rc #tamiyarc #setuptips
Thank you for your videos. I do learn alot. Have you considered adding foam to the sides of the chassis to fill in the gap between the chassis tub and body? Like you have done on one of your previous videos. Thank you and best of luck to you and your daughter!
For Tamiya Cup racing rules, no I have not as it might be questioned by tech inspectors. But I will for open rules racing. Thanks!
Good luck!
Thank you for your contribution Porche!!
#robot
#GemmaChan
#Humans😁
Hey Mr Mangalan, I don't know how much experience you have with the TT02, how do these two compare? I always thought they were very similar, but the TT02 seems to have more aftermarket support etc. Thanks again for the content - you and Porsha have amassed quite a few followers
TT02 is also fast, either would be good. I just find the TT01 has has a tighter steering radius and better stock camber setting. Maybe I will try to tune my TT02 someday :)
I've been running traxxas 20million silicone in my front diff. Seems to be consistent
Thanks for the tip.
Your gear ratio 28/55 T,is that the optimum gearing?
Works good for our 15.5T tamiya brushless with boost.
How do you eliminate torque steer? Thanks
Never felt it for this car and small/medium tracks.
Spur and pinion gear teeth used?
28/55
traction roll? the original tt01 is 2mm narrow than touring car?
I run 3.5mm hex make it more narrow
please dont bully other cars again, haha
wow secret traction compound, for asphalt or carpet?
@@maxchung539 Both