A video of the Herculx with the modern Corsair case, perfect. I've got a question. GPU cables aside, would the second SATA SSD slot in the front still be usable if you moved the Herculx maximum to the right, so that the support is placed just under the right edge for the GPU? Also, this is a question from the perspective of the RTX 4000's cards (which is why cables are not an issue here, since it's not only one cable, but placed in the middle of the GPU), which is most likely even longer than the GPU in the video.
Hello! I have not actually tried what you are asking. But it looks like it's not going to fit or is a very very tight fit. The problem is the foot of the Herculx that is in way, that's why i am only using 1 ssd instead of risking troubles with fitment! I used one of the slots on the backside for my second SSD instead. My advice to you would be to buy a larger case for the 4000 cards since they are huge! :) Hope that helps!
im interested in where you put the Graphics card radiator and fans? that looks clean as hell! Its my biggest concern with only a two fan/heatsink what to do with it so i can have my nicer fans on front etc..wait is this an 3090ti? rog strix think you have a 3080, wish the 3090ti didnt have this water cooling...its so overkill
Hello! Thank you for the kind words! I tried to made it as clean as i could when i put it together :) I have a 3080 Rog Strix card if thats what your wondering! I dont have a graphicscard radiator, but i have one for my cpu and that one i put in the top. Its a 240 rad so its only 2 fans! This case (Corsair 4000x) should fit a 360 rad to if u want that! Yeah its allways tricky to decide where to put all the fans! :) Try to preinstall them and see where you you think they fit the best! And also don’t forgot to put front as intake and back as exhaust! That is easy to forget!
Hello friend. Thanks for the video, what's the name of that ROG sticker that appears at 1:38? With what name can I search for it on Google? Where can I buy it? Hug
I'm trying to add one of these to my setup but since I use fans on the bottom, i'm trying to find an important information. Could you please inform the length of the base? It looks like a little less than half the total length of the piece? Would you be kind enough to provide this information? thank you so much!
Hello! The information from the website is as following. Length = 208 mm So the base must be around 120-130 mm. If you want the exact number i can measure it next time i open up my case. Hope that answers your question.
I just bought this card holder but i connected it to an ARGB Hub (connected via sata) and it is not turning on, i'm not sure why. Would it be better if i connect it directly to the MB? Or should i use some software to light it up. I'm lost lol
I would say better to connect to MB, but also you need the armory crate software... sucks but i think that is the only way to control the HerculX sadly!
We talking about the AIO? or the straps? The AIO i bought from the general electronic store, it's called " ASUS ROG Strix LC 240 RGB " The straps came with the Graphics card! :D
does it have to be installed in the middle? i just got this and waiting for it in the mail and i have fans on the bottom of my case.. except to the right side of the gpu would it be ok to put it to the far right of the gpu?
You actually installed it wrong. Theres a "shelf on the back that should carry the Gpu, so you can access the adjustment screw for small increments on the top... Besides that, its a 3 pin led, is your connection on the mb also 3 pins, mine is a 4, and it can not be connected :(
Hey - I just bought this card and was going to RMA it because of the heatsink sagging on the one end of the card. I notice yours is the same? Does it not bother you ?
Hey! Oh, i have not noticed that 🤔 I have allready RMA:ed one card and it took forever to get a new one. So im abit hesitant about that. Good luck with the RMA, hopefully yours goes better then mine did!
Hey man, thanks for the video, it was helpful. I'm reaching out for help though because after doing several google/reddit searches I couldn't get the info I need, so I really hope you might be able to help!! I have the Herculx plugged in, and it it lighting up and cycling through all colours on my PC start up, so I know it's functioning. But after my PC has finished booting up and all the settings for my LEDs become applied [Motherboard, Ram, Fans, Mouse, Keyboard - all programmed through iCUE] then the Herculx lightening affects turn off. I can't not find it in iCUE and can't find it in Armory crate, like it's physically working but I am unable to see it from a programmed perspective..... Obviously you have your working and have changed the colour settings...... Ideally I would love to do this through iCUE purely for simplicity. My motherboard is a "ROG STRIX Z490-E Gaming". Maybe a follow up video of how to find the Herculx and program the colours?? Or any advice would be great!! Thanks :)
Hey man! Thanks for the long question and thoughts! I might do a video about that exact thing... since i have the same problem now for some reason! I think it's software related as i started having problems when i installed my LIAN-LI Strimmer cables...or might be to much rgb for the motherboard to handle i dunno. :D No just kidding i think its something with the software. It seems your not the only one having problems tho. I read many ppl having trouble with the Herculx, hopefully i can fix this problem atleast. I'll be back with video when i solve it. :D sub so you don't miss it!
@@berndttonaut7631 Hey! I actually did some testing a while ago, its in my latest video. I didn't get it to work either... so it might be that these buggers break after some time... it feels like mine has at least. So it feels like Asus have some Quality issues with these sadly...
i hate rgb for me is only good on keyboard if easy to turn off when i play Horror games is anoing if im must be honest with you is only good for crismas
aura sync doesn't detect my Asus rog herculx, what can I do?
It did not work for me either, only in armory crate for some reason! Try that!
A video of the Herculx with the modern Corsair case, perfect. I've got a question. GPU cables aside, would the second SATA SSD slot in the front still be usable if you moved the Herculx maximum to the right, so that the support is placed just under the right edge for the GPU? Also, this is a question from the perspective of the RTX 4000's cards (which is why cables are not an issue here, since it's not only one cable, but placed in the middle of the GPU), which is most likely even longer than the GPU in the video.
Hello! I have not actually tried what you are asking. But it looks like it's not going to fit or is a very very tight fit.
The problem is the foot of the Herculx that is in way, that's why i am only using 1 ssd instead of risking troubles with fitment!
I used one of the slots on the backside for my second SSD instead.
My advice to you would be to buy a larger case for the 4000 cards since they are huge! :)
Hope that helps!
the wire of the support where is conect?
RGB Connector on motherboard. it's a 3 pin.
Are you not using SignalRGB?
Hey! No im using Icue and armory crate!
@@Noobren oh if you love rgb which it seems you do, you gotta try it :)
Only issue for me is I have fans underneath so I don't know how I'm suppose to keep it held up
There are graphic card holders that you attach to the back of the case, look for those!
@@Noobren oh thanks so much, I was worried I wouldn't be able to get something to hold it up
@@AirDrifter77 no worries man!
im interested in where you put the Graphics card radiator and fans? that looks clean as hell! Its my biggest concern with only a two fan/heatsink what to do with it so i can have my nicer fans on front etc..wait is this an 3090ti? rog strix think you have a 3080, wish the 3090ti didnt have this water cooling...its so overkill
Hello!
Thank you for the kind words! I tried to made it as clean as i could when i put it together :)
I have a 3080 Rog Strix card if thats what your wondering!
I dont have a graphicscard radiator, but i have one for my cpu and that one i put in the top. Its a 240 rad so its only 2 fans!
This case (Corsair 4000x) should fit a 360 rad to if u want that!
Yeah its allways tricky to decide where to put all the fans! :)
Try to preinstall them and see where you you think they fit the best!
And also don’t forgot to put front as intake and back as exhaust! That is easy to forget!
Hello friend. Thanks for the video, what's the name of that ROG sticker that appears at 1:38? With what name can I search for it on Google? Where can I buy it? Hug
Hello! thanks for the comment!
It was gifted with the power supply wich is a ASUS ROG Strix 1000, 1000W PSU. Hope it helps!
@@Noobren Thanks bro
What connection is on this. I couldn’t tell in the video because it was blurred.
Yeah sorry camera might have focused on something else there for a moment... a 3 Pin RGB header.
corsair Airflow 4000D Pc Case?
No the Corsair 4000X with tempered glass! :)
@@Noobren aaaah okay i have a corsai 4000D that couldnt Fit a Liquid Freezer 3 360
El cable del soporte a donde lo conectas?
I do not Speak english, but i think its about the cable? its a 3 pin RGB cable.
how change colors?
You need the armory crate software to do that!
I'm trying to add one of these to my setup but since I use fans on the bottom, i'm trying to find an important information. Could you please inform the length of the base? It looks like a little less than half the total length of the piece? Would you be kind enough to provide this information? thank you so much!
Hello!
The information from the website is as following.
Length = 208 mm
So the base must be around 120-130 mm.
If you want the exact number i can measure it next time i open up my case.
Hope that answers your question.
I just bought this card holder but i connected it to an ARGB Hub (connected via sata) and it is not turning on, i'm not sure why. Would it be better if i connect it directly to the MB? Or should i use some software to light it up. I'm lost lol
I would say better to connect to MB, but also you need the armory crate software... sucks but i think that is the only way to control the HerculX sadly!
thanks , looked allot smaller on pictures , no way this will fit in my micro atx build with a 3060ti
You didn't even use the included "magnetic spirit level" properly to ensure you GPU was properly aligned...
Where do u connect on the mobo to the wire for rgb?
The 3 pin rgb connector :)
And here I just cut a wood block with millimeter precision and just rammed the sh*t in there.. oh, I painted it black :)
That's another way to do it!
Where did you Buy the strix holder that is on the pump?
We talking about the AIO? or the straps? The AIO i bought from the general electronic store, it's called " ASUS ROG Strix LC 240 RGB " The straps came with the Graphics card! :D
does it have to be installed in the middle? i just got this and waiting for it in the mail and i have fans on the bottom of my case.. except to the right side of the gpu would it be ok to put it to the far right of the gpu?
Yeah it should be no problem, just watch out for the fans so u don't block em!
Wth, my motherbaord doesnt have a 3 pin rgb header. Where does it go?
You can buy adapters. So get one of those and it should work. 4 pin to 3 pin adapter. Hope it helps! Good luck!
Which port should you connect that in the motherboard?
The 3 pin RGB lightning connector.
I don’t know where to plug in the lighting cable
www.technewstoday.com/wp-content/uploads/2022/03/12v-rgb-header-.webp
The connector looks like this.
Hope that helps!
@@Noobren thats 4pin, i think he need 3pin to connect rgb for this holder
@@TheoVascos You are corrent, my bad.
Nice. Is it recognised by the Aura software and separately controllable?
It should be. But i had issues with it, but it seem to work with the armory crate software.
I have question , did it came with stuckers?
Stuckers? No it's just soft pads that prevent it from moving. Maybe that's what you mean?
Any idea if this works for a zotac 3080ti trinity?
Should work just fine!
Can it be connected to signalrgb or Razer chroma aswell?
I don't know actually, it syncs well with the asus firmware atleast!
You actually installed it wrong. Theres a "shelf on the back that should carry the Gpu, so you can access the adjustment screw for small increments on the top...
Besides that, its a 3 pin led, is your connection on the mb also 3 pins, mine is a 4, and it can not be connected :(
Hey - I just bought this card and was going to RMA it because of the heatsink sagging on the one end of the card. I notice yours is the same? Does it not bother you ?
Hey!
Oh, i have not noticed that 🤔
I have allready RMA:ed one card and it took forever to get a new one.
So im abit hesitant about that.
Good luck with the RMA, hopefully yours goes better then mine did!
It's nice, but I have 6-7 inches between the bottom of the case and bottom of the card, don't think it's gonna expand THAT much, ah well.
Good luck!
Put two of them
Love the tribute! Haha genious
Nice music choice!
Thanks man! :)
Would anyone know if these can sync in Corsair iCue as my Asus Strix GPU and motherboard do? Easier to sync up the entire PC this way.
For me it does not show up for some reason.
Should be possible tho, but might require something im not having in my build.
@@Noobren Ok thank you.
There are Add-ons that you can install in Icue there is one for Aurora Sync
I'm probably gonna but this and use it to cover the gpu(pcie) cables.
My pc case(helios) has gpu mounts already 🙌
I have the same case and the Rog 4090, the case mount is great but trust me I’d get this or use the one that may or may not come with the gpu
3pin right?
Yes, the video seemed to make that part abit blurry for some reason. Sorry about that!
2:49 wrong tribute song, it should be something metal...
Is this iCue compatible?
Should be, but im using it through the asus armory crate app
Issues with cables.. just a little. Clean it up
Issues?
What cables do you mean?
This idiot thought that he can somehow see through the card holder and proceed to complain about its cable lol
@@Noobren think he means that the cables are overlapping the gpu
True, not so visually but also blocks the air but other then that seems very nice.
What is the price point??
I don't know what your country has for prices sorry.
I Bought it for around 55 Dollars on sale here in Sweden if that helps!
@@Noobren komplett?
hi there. One question. Is the RGB A-RGB? Does it have four pins? Is it compatible with other motherboard brands like MSi?
Hello!
It has A-RGB and it's a normal RGB cable so it should be compatible with other brands to!
Is that the answer you were looking for? =)
Mine has 3 pins, but My motherboard has 4🤣
@@DibujAmeUn So anyway around it? my mb has 4 :(
Hey man, thanks for the video, it was helpful. I'm reaching out for help though because after doing several google/reddit searches I couldn't get the info I need, so I really hope you might be able to help!! I have the Herculx plugged in, and it it lighting up and cycling through all colours on my PC start up, so I know it's functioning. But after my PC has finished booting up and all the settings for my LEDs become applied [Motherboard, Ram, Fans, Mouse, Keyboard - all programmed through iCUE] then the Herculx lightening affects turn off. I can't not find it in iCUE and can't find it in Armory crate, like it's physically working but I am unable to see it from a programmed perspective..... Obviously you have your working and have changed the colour settings...... Ideally I would love to do this through iCUE purely for simplicity. My motherboard is a "ROG STRIX Z490-E Gaming". Maybe a follow up video of how to find the Herculx and program the colours?? Or any advice would be great!! Thanks :)
Hey man! Thanks for the long question and thoughts! I might do a video about that exact thing... since i have the same problem now for some reason! I think it's software related as i started having problems when i installed my LIAN-LI Strimmer cables...or might be to much rgb for the motherboard to handle i dunno. :D No just kidding i think its something with the software. It seems your not the only one having problems tho. I read many ppl having trouble with the Herculx, hopefully i can fix this problem atleast. I'll be back with video when i solve it. :D sub so you don't miss it!
@@Noobren Thanks so much dude, I'll keep an eye out for it.
Hey I would like to see the vid too! I have the same problem, how did you solve it?
@@berndttonaut7631 Hey!
I actually did some testing a while ago, its in my latest video. I didn't get it to work either... so it might be that these buggers break after some time... it feels like mine has at least.
So it feels like Asus have some Quality issues with these sadly...
amazing holder + what is the name of the backround song its awesome
All music in the video is in the description. But if you mean the first song, its this one : Cartoon - On & On (feat. Daniel Levi) [NCS Release]
W build
Vas a quedar ciego hermano con tanto rgb 😂
RoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoGRoG
LOL 😂
i hate rgb for me is only good on keyboard if easy to turn off when i play Horror games is anoing if im must be honest with you is only good for crismas
Cool
Nobody asked
Who asked fr
Mehh
support rtx 2070super?
Yeah it should, but if u want to be sure you should ask nvidia.