Benelli Argo

Поділитися
Вставка
  • Опубліковано 19 кві 2010
  • The Benelli Argo Comfortech rifle is distinguished by the highly innovative content of its technical and esthetic profile: slim lines, black finish, the velvet effect of the Comfort Touch for the stock and fore-end in technopolymer and a striking design.
    The Argo Comfortech rifle represents the perfect balance between performance and control of the firearm thanks to the exclusive Benelli Comfortech System that ensures a considerable reduction in recoil, less muzzle climb and quicker target acquisition.
  • Спорт

КОМЕНТАРІ • 11

  • @jorgepacheco1410
    @jorgepacheco1410 12 років тому

    EL BENELLI ARGO ES SIN LUGAR A DUDAS UN RIFLE PERFECTO.,YO TENGO UNO EN CALIBRE 30-06 Y ESTOY SEGURO DE QUE ES LA MEJOR OPCION PARA LOS HOMBRES QUE NOS ENCANTA LA CACERIA.

  • @PertigueiroBR
    @PertigueiroBR 13 років тому

    Leve e compacto! Recuo suave.

  • @hokanut
    @hokanut 10 років тому

    Bra tak.

  • @juanmartinez-hl2dc
    @juanmartinez-hl2dc 5 років тому

    como se gradua el punto de mira ????

  • @flavion1259
    @flavion1259 8 років тому

    Da poco ho visto una canna ARGO E PRO 308 con un danneggiamento provocato tra presa di gas e pistone dovuto ad una mancanza di pulizia. Partendo dal presupposto che il fucile è stato pulito prima di andare al campo di tiro è possibile che sparando solamente 20 colpi se la presa di gas e il pistone non vengono puliti subito dopo e si lascia ferma l'arma per sei mesi i residui di combustione degli inneschi possano provocare la corrosione della presa di gas con un conseguente grippaggio fra le due parti?

    • @flavion1259
      @flavion1259 8 років тому

      +flavion1259 Recently I saw a barrel ARGO E PRO 308 with a damage caused between gas outlet piston is due to a lack of cleaning. Assuming that the rifle was cleaned before going to the shooting range is possible for firing only 20 rounds if the outlet gas and the piston are not cleaned soon after and left still for six months combustion residues of the triggers can cause corrosion of the outlet gas with a consequent seizure between the two sides?

    • @flavion1259
      @flavion1259 8 років тому

      +flavion1259 Hace poco vi un barril ARGO E PRO 308 con un daño causado entre el pistón de salida de gas se debe a la falta de limpieza. Suponiendo que el rifle se limpió antes de ir al campo de tiro es posible para disparar 20 rondas sólo si el gas de salida y el pistón no se limpian al poco tiempo y aún quedan seis meses para los residuos de combustión de los factores desencadenantes puede causar la corrosión del gas de salida con la consiguiente convulsión entre los dos lados?

    • @flavion1259
      @flavion1259 8 років тому

      +flavion1259 Kürzlich habe ich ein Fass ARGO E PRO 308 mit einem Schaden zwischen Gasauslass Kolben verursacht wird, ist aufgrund des Fehlens der Reinigung. Unter der Annahme, dass die Waffe gereinigt wurde, bevor auf den Schießstand gehen ist möglich, für das Brennen nur 20 Runden, wenn das austretende Gas und der Kolben sind bald nicht gereinigt nach und noch Verbrennungsrückstände der Auslöser für sechs Monate verlassen können verursachen Korrosion des Austrittsgases mit einer sich daraus ergebenden Festfressen zwischen den beiden Seiten?

    • @flavion1259
      @flavion1259 8 років тому

      +flavion1259 Récemment, je vis un baril ARGO E PRO 308 avec un dommage causé entre la sortie de piston à gaz est due à un manque de nettoyage. En supposant que le fusil a été nettoyé avant d'aller au champ de tir est possible pour le tir seulement 20 tours si le gaz de sortie et le piston ne sont pas nettoyés aussitôt après et à gauche encore pour six mois les résidus de combustion des déclencheurs peuvent provoquer la corrosion du gaz de sortie avec une crise conséquente entre les deux parties?

    • @flavion1259
      @flavion1259 8 років тому

      +flavion1259 Недавно я видел бочку АРГО E PRO 308 с ущерб, причиненный между газоотвод и поршень из-за отсутствия очистки. Предполагая, что винтовка была очищена перед выходом на стрельбище возможно для стрельбы только 20 раундов, если выход газа и поршень не очищены немедленно и оставить оружие он останавливается в течение шести месяцев остаточных продуктов сгорания из триггеров может вызвать коррозию розетки газа с последующим захватом между двумя частями?

  • @juanmartinez-hl2dc
    @juanmartinez-hl2dc 5 років тому

    aqui todios sabe disparar y desmontar pero ni puta idea de graduar el punto de mira