That was alot of work. But the results look very nice. I have an old BMW R100 and now that I've watched your video I'm going to do the same thing to that bike's valve covers. Thanks!
I’ve got a k100 I’m planning to strip and restore. Quick question, was there a reason you removed the covers to strip and paint the block and just covered the cams and crank with masking tape? My plan was to leave the case covers on for stripping and repainting the engine block then take them off and do them separately and reattach them. Use the covers as masks. Is that a good idea or is there a reason not to do that?
Mega geile Arbeit, könntest du bitte sagen welche Farbe du benutzt hast? Wieso hast du den Block nicht mit der Dose ebenfalls lackiert? Welches Tabe hast du zum abklemmen genutzt? Danke
Danke dir 🙏🏻 Ich wollte beim Block mal was anderes ausprobieren, muss aber gestehen das ich beim nächsten Projekt den Block auch mit Dose lackieren werde, das Ergebnis ist mit Dose einfach feiner 😆 Tape ist ganz normales Lackierer Tape 😎✌🏻
I wish I could upload a picture of my stripped k75 I've just deleted the abs (non functional) the bike weighs half of what it did with all the fairing removed, this video has gave me confidence to DIY myself a shiny engine 👋👋
Hello, I watch your videos on UA-cam. I will buy a torque wrench for the K1100lt motorcycle engine. 20-120 N.M Will an adjustable torque wrench be enough or should I buy 25-220?
It seems that you have a pretty good shop setup, and presumably a decent compressor. You may want to look in to a DIY vapor honing/blaster for your shop---if you haven't since you made this video. Check out some youtube videos, concise minimal talk. And, you stop when an important development occurs. You make great videos. I have a 86 K100RS and was going to eventually restore to original, but I like the cafe racer better.
Top Video und alles geil erklärt. Dein Humor gefällt mir 😂 fange bald auch an meine umzubauen und struggle noch mit dem Lack. Deiner glänzt verdammt gut! Kannst du mir verraten welche Marke du benutzt hast?
Sehr gut! I am searching the internet for a high gloss heat resistant paint in a can, but with no results... Can you tell me the specific can you used? It would greatly help me in my DIY paint job for my K100 🤘🏻 Gruße aus Holland.
Thank you buddy 🙏🏻🙏🏻 I used a paint which is usually considered as brake caliper paint but it works pretty good for engines too. Next time I will try VHT engine paint I’ve heard it works pretty good 😎
Ich wollte das Ganze mal ausprobieren 😄 beim nächsten mal wird aber wieder die spray Dose benutzt, das Ergebnis mit Pinsel ist ok aber doch sehr grob die Farbstruktur wenn alles trocken ist 😅 aber nicht so tragisch, vom Block selber sieht man ja nicht viel später 😎👍🏻
Servus, das ist so ne Art Bremssattellack, also kein expliziter Hitzeschutzlack. Hat aber soweit immer alles gut gehalten. Da hat aber jeder seine eigene Philosophie 😅 Gruß Patrick ✌🏻
I’ve got a k100 I’m about to strip down, this series has been a great help!
That was alot of work. But the results look very nice. I have an old BMW R100 and now that I've watched your video I'm going to do the same thing to that bike's valve covers. Thanks!
Thanks buddy 🙏🏻 It is definitely worth the effort! Best of luck with your project 😎✌🏻
I’ve got a k100 I’m planning to strip and restore. Quick question, was there a reason you removed the covers to strip and paint the block and just covered the cams and crank with masking tape? My plan was to leave the case covers on for stripping and repainting the engine block then take them off and do them separately and reattach them. Use the covers as masks. Is that a good idea or is there a reason not to do that?
Mega geile Arbeit, könntest du bitte sagen welche Farbe du benutzt hast? Wieso hast du den Block nicht mit der Dose ebenfalls lackiert?
Welches Tabe hast du zum abklemmen genutzt?
Danke
Danke dir 🙏🏻 Ich wollte beim Block mal was anderes ausprobieren, muss aber gestehen das ich beim nächsten Projekt den Block auch mit Dose lackieren werde, das Ergebnis ist mit Dose einfach feiner 😆 Tape ist ganz normales Lackierer Tape 😎✌🏻
hello, witch brand paint you used ? i want to paint my k 100 to ... thx ... tumbs up
I wish I could upload a picture of my stripped k75 I've just deleted the abs (non functional) the bike weighs half of what it did with all the fairing removed, this video has gave me confidence to DIY myself a shiny engine 👋👋
Hey mate thank you 😎 you can do it 😜 I hope you will achieve a great result 💪🏻
Hello, I watch your videos on UA-cam. I will buy a torque wrench for the K1100lt motorcycle engine.
20-120 N.M Will an adjustable torque wrench be enough or should I buy 25-220?
It seems that you have a pretty good shop setup, and presumably a decent compressor. You may want to look in to a DIY vapor honing/blaster for your shop---if you haven't since you made this video. Check out some youtube videos, concise minimal talk. And, you stop when an important development occurs. You make great videos. I have a 86 K100RS and was going to eventually restore to original, but I like the cafe racer better.
Top Video und alles geil erklärt. Dein Humor gefällt mir 😂 fange bald auch an meine umzubauen und struggle noch mit dem Lack. Deiner glänzt verdammt gut! Kannst du mir verraten welche Marke du benutzt hast?
Sehr gut! I am searching the internet for a high gloss heat resistant paint in a can, but with no results... Can you tell me the specific can you used? It would greatly help me in my DIY paint job for my K100 🤘🏻
Gruße aus Holland.
I am working my k100 and this video helps a lot. Thank you! What kind of paint did you used? How it resistant heat?
Thank you buddy 🙏🏻🙏🏻 I used a paint which is usually considered as brake caliper paint but it works pretty good for engines too. Next time I will try VHT engine paint I’ve heard it works pretty good 😎
@@CPCustomswill it work? Considering the engine is partially out of alumminum?
will be great to have paint info
What model of spray paint did you use for the caps and does it keep well? did you use varnish or just paint?
it's brake caliper paint
Wieso hast du den Motor mit 🖌 lackiert? Ist ein Spezial Lack? Danke
Ich wollte das Ganze mal ausprobieren 😄 beim nächsten mal wird aber wieder die spray Dose benutzt, das Ergebnis mit Pinsel ist ok aber doch sehr grob die Farbstruktur wenn alles trocken ist 😅 aber nicht so tragisch, vom Block selber sieht man ja nicht viel später 😎👍🏻
You really need to put on a mask when painting parts man ;)
Due to corona I am low on masks at the moment 😂🤷🏻♂️ but thanks for the advice 😆 I will order some for the next job 😎🤘🏻
👍👍
👍
👌🥰
Moin,
Hast du die Teile mit normalem Lack lackiert oder ist das hitzeschutzlack?
Servus, das ist so ne Art Bremssattellack, also kein expliziter Hitzeschutzlack. Hat aber soweit immer alles gut gehalten. Da hat aber jeder seine eigene Philosophie 😅 Gruß Patrick ✌🏻
hi brother may I ask you please how much is it for this motorcycle?
Explanation in the final epsiode 😎
02:48 You listen serbian music?
Yes 😎
@@CPCustoms Greatings from Serbia
@@15oklopnabrigada thank you buddy 😎🙏🏻