Dear @monicagarcia-pg2ex, you don’t need a specific USB stick but we recommend using a BERNINA USB stick as these have been tested to ensure compatibility. If you are using another stick, make sure the USB stick storage size is not bigger than 32 GB and it is formatted as FAT 32.
Dear Barbara Bomba, the small screw on the BERNINA CutWork Tool can and should only be loosened slightly (not to be unscrewed completely). When the BERNINA CutWork needle is replaced, please note that the screw meets the flat area for the BERNINA CutWork needle to be pressed into the correct cutting direction. The cylindrical shaft of the BERNINA CutWork needle must not be damaged so that it does not get stuck in the BERNINA CutWork Tool. Please note that only original BERNINA CutWork needle can be used.
Dear Κικιρικου Μανταλακια, you need the software to edit or create CutWork designs but not when using ready-made designs. These you can just open on the machine.
Was shopping today at my local Bernina supplier and they couldn't answer if the Bernina Cutwork foot will work on my Bernette 79. Is it the same foot or is there a Bernette Cutwork foot/tool? thank you
Hi Debby, there is no extra foot needed, you can use the standard embroidery foot that is included. For this reason the BERNINA CutWork tool only is available (without foot).
Just checked your store in Australia and couldn’t find the tool ... where can I get this from in Melbourne Australia and are there any lessons/tutorials/workbooks on using it? I have a b79
Hi Sabrina, please go to your dealer, I am sure he can order the tool for you. If not, please get in touch with BERNINA Australia: www.bernina.com/en-AU/Footer-en-AU/Feedback-and-Service-Pages/Contact-us. There is a CutWork workbook (see www.bernina.com/de/SupportData/Software/CutWork-Software/CutWork_EN_A4-de). These tutorials are not made with or for bernette machines though. If you plan to use CutWork on your b70 DECO or b79 please watch the video above.
Dear Sahar Musa, Our Saudi importer will be happy to take care of your needs. Please contact Mr. Ali Almushiri in Alkhobar. Email: al-mushiri@al-mushiri.com / phone: +966 (13) 864 1146 Ali Mohammed Almushiri Trading Est. King Khalid Street Cross A P.O. Box 237 Al-Khobar 31952 Saudi Arabia www.al-mushiri.com
i bought it last year , its the worst embroidery machine , i had janome mc 500 its waaay better than this machine , have a lot of embroidery problems , and its too expinsive , i dont advise any body to buy it!!
Hi @BentAlsultan We’re sorry to hear that you’re not satisfied with your machine. We encourage you to reach out to your bernette dealer for assistance with any issues you’re experiencing-they can provide valuable help and tips. We’ve had so many customers over the years who have been very happy with the embroidery features of this machine, and we hope you can also achieve great results with it.
Hi do you happen to know if I want to transfer pic from my computer to the embroidery machine if I need specific usb stick ?
Dear @monicagarcia-pg2ex, you don’t need a specific USB stick but we recommend using a BERNINA USB stick as these have been tested to ensure compatibility.
If you are using another stick, make sure the USB stick storage size is not bigger than 32 GB and it is formatted as FAT 32.
I need to know how to assemble the cutwork tool straight from the box. How does the "cutter"/knife stay in the "wheel"???
Dear Barbara Bomba, the small screw on the BERNINA CutWork Tool can and should only be loosened slightly (not to be unscrewed completely). When the BERNINA CutWork needle is replaced, please note that the screw meets the flat area for the BERNINA CutWork needle to be pressed into the correct cutting direction. The cylindrical shaft of the BERNINA CutWork needle must not be damaged so that it does not get stuck in the BERNINA CutWork Tool. Please note that only original BERNINA CutWork needle can be used.
Do I need the software to use the cutwork?
Dear Κικιρικου Μανταλακια, you need the software to edit or create CutWork designs but not when using ready-made designs. These you can just open on the machine.
@@Mybernette I purchased the Bernette B70 deco, how can I activate Bernina designworks?. I only have keys to activate the toolbox.
Was shopping today at my local Bernina supplier and they couldn't answer if the Bernina Cutwork foot will work on my Bernette 79. Is it the same foot or is there a Bernette Cutwork foot/tool? thank you
Hi Debby, there is no extra foot needed, you can use the standard embroidery foot that is included. For this reason the BERNINA CutWork tool only is available (without foot).
Gostaria saber onde compra essa máquina o valor e o manual e só Ingues tem português amei obrigada
Olà Marly,
você mora onde para poder indicarlhe o representante bernette?
Sim, tem manual em portugues.
Até logo,
BERNINA International AG
Can the stitch plate on the b70 be changed to use this CutWork tool?
The same stitch plate can be used. There is no need to change the stitch plate for the CutWork tool.
I have the Chicago 7, will the same cutting tool fit.
Hi Amanda, yes the CutWork Tool is compatible with the Chicago 7 as well.
Just checked your store in Australia and couldn’t find the tool ... where can I get this from in Melbourne Australia and are there any lessons/tutorials/workbooks on using it? I have a b79
Hi Sabrina, please go to your dealer, I am sure he can order the tool for you. If not, please get in touch with BERNINA Australia: www.bernina.com/en-AU/Footer-en-AU/Feedback-and-Service-Pages/Contact-us.
There is a CutWork workbook (see www.bernina.com/de/SupportData/Software/CutWork-Software/CutWork_EN_A4-de). These tutorials are not made with or for bernette machines though. If you plan to use CutWork on your b70 DECO or b79 please watch the video above.
Machine price sir
Please contact your local dealer: www.bernette.com/dealersearch
I bought a b79 .. Where can I buy this tool from? I live in Saudi Arabia
Dear Sahar Musa,
Our Saudi importer will be happy to take care of your needs. Please contact Mr. Ali Almushiri in Alkhobar. Email: al-mushiri@al-mushiri.com / phone: +966 (13) 864 1146
Ali Mohammed Almushiri Trading Est.
King Khalid Street Cross A
P.O. Box 237
Al-Khobar 31952
Saudi Arabia
www.al-mushiri.com
i bought it last year , its the worst embroidery machine , i had janome mc 500 its waaay better than this machine , have a lot of embroidery problems , and its too expinsive , i dont advise any body to buy it!!
Hi @BentAlsultan We’re sorry to hear that you’re not satisfied with your machine. We encourage you to reach out to your bernette dealer for assistance with any issues you’re experiencing-they can provide valuable help and tips. We’ve had so many customers over the years who have been very happy with the embroidery features of this machine, and we hope you can also achieve great results with it.
Machine price sir
Please contact your local dealer: www.bernette.com/dealersearch