✅ ANSYS Design Modeler - Pipes Y-Shaped/T-Shaped - Intermediate Tutorial 4
Вставка
- Опубліковано 5 лют 2025
- ************************* Donation: **********************
PayPal: www.paypal.me/...
Bitcoin: 3MEiS2XFQcDxZESbVF7HErDU7Fp55UxTBV
*************************************************************
Computational Fluid Dynamics
#AnsysDesignModeler #DesignModelerPipes #AnsysDesignModelerYShaped
cfd.ninja/
ANSYS - Наука та технологія
Thank you for the demonstration. It was an enjoyable karaoke session
Thanks, it seems you like to sing, good luck
@@ansys_cfd The demonstration helped me in the process of making a parametric model of a T-junction
Thank you so much. This tutorial is amazing.
Thank you!
I am working in my individual project. Your tutorial help me. Thanks
I am glad that this tutorial can help. Best Regards
Many thanks 👍
You're welcome friend.
Best regards
Hi sir, is it possible for you to teach, draw two pipes with weld joint between them?
this helped a lot. However, if I am trying to make a pipe that extends in to 3 branches, which is the only thing I want to create, do I still need to do the 0.215 thing? I am asking because I only want the mesh to be for the fluid flow region and the three branches (3 exits), each have a different diameter
Very clear thank you. however, Can you please explain to us what does mean add frozen and why you add it ?
Hi friend, Of course, Add frozen is an option when you apply an extrusion (Add material is another option) and it is necessary because with Add frozen I will create two bodies in change if I use Add material I will create one body only and in this tutorial I need separate the bodies then use Subtract tool. Regards
how if the diameter in the branch is changing ? just like in the real penstock bifurcation application (there is a gradually change in diameter at the beginning of the branch). may you tell me how to make it ?
Can you do the cfd analysis tutorial of an over expanded nozzle flow?
Hi friend,
You refer to this:
ANSYS FLUENT
cfd.ninja/ansys-fluent-convergent-divergent-cd-nozzle/
ANSYS CFX
cfd.ninja/convergent-divergent-cd-nozzle/
Regards
Thanks for the help. 😊
Well,there is no domain created around nozzle(for analysing the exhaust plume patterns) in referred link video.Can please you do a proper Ansys Fluent video tutorial?
Thanks 😀
Hello, if the parent pipe and daughter pipes have different diameters then how to generate the geometry? Does "sweep" works? Thanks!
Hi friend;
For that is necessary to create another constraint, I will try to do it soon.
Regards
Thank you
You're welcome friend
Best regards
Sir i knw a lot from ur tutorials bt i stuck in one thing which is....i work on straight blade vertical axis wind turbine n wanna do structural analysis so i want to knw how to apply load and spprt n where to apply it. Plzzz hlp meh sir plz plz plz
Hi friend;
What kind of load do you want to add? Pressure, weight, another?
Regards
Hello cfd ninja.. Can u made a private toturial for my case , i am phd student and i have no time to learn ansys, and you will gain some money ..
How can i contact with you?
Hi friend, At this moment I don't have time, but please send an email with your case to support@cfd.ninja
someone can help you. Regards
CFD.NINJA ANSYS
Could you give me your whats up number??
Can I import wire frame from catia and do the same procedure?
Hi friend,
You need step, iges ir parasolid formar.
Regards
@@ansys_cfd I saved the file as igs but when I import it into ansys ,I couldn't see anything
Hi, CFD Ninja.. Thank you so much for this tutorial. But I still have a question. Is it possible to mesh a 45 degree junction with all structured meshing? Or if its not possible. Can I combine the mesh, structured hex mesh with unstructured mesh? Thankyou so much. And how can I contact you to have a better communication? Thankyou so much, Bro..
Yes friend, that is possible. Maybe this tutorial can be help:
cfd.ninja/ansys-meshing/ansys-meshing-hexahedral-mesh/
Best regards
how i can model it from shell
Hi friend, Can you explain more about your query?
Regards