This man has presenting skills so locked down that he can teach you more stuff in five minutes than most can teach in 15 minutes to half hour videos. Great series!
Hello, It all depends on the sensor you have to measure water flow. You can find sensors that output an analog voltage signal (0 to 10V) that corresponds to the water flow being measured. Then use a data acquisition device to bring the measurement into LabVIEW, for graphing, analysis and data logging.
@sazer123 Hello. If your panel meter has a communications port, you might be able to get your data directly into LabVIEW that way. Serial standards like RS-232 or RS-485 are fairly common in industrial automation, and LabVIEW has built-in functions to interface with serial drivers.
Hi Vinit, watched your videos, they all are very informative. We are having Ni myDAQ system and we want to do continuous monitoring of voltage over lab view. We are working on one project in which we are using a photomultiplier tube (PMT) to sense low-intensity light. The PMT gives output in voltage (equivalent to light intensity) and we want to see the output of PMT over Labview using Ni myDAQ system. We have tried so many times but were unable to configure PMT and DAC system. Kindly please help us in this regard. Looking forward to here from you. Thank You
@MrRushabhT There are some people on our forums already interfacing LabVIEW and the Atmega32. Please visit our forums at ni dot com slash forums or Google "LabVIEW Atmega32". Hope this helps!
This man has presenting skills so locked down that he can teach you more stuff in five minutes than most can teach in 15 minutes to half hour videos. Great series!
Noooo, Vanid forgot to smile during the outro 4:46
Hello,
It all depends on the sensor you have to measure water flow. You can find sensors that output an analog voltage signal (0 to 10V) that corresponds to the water flow being measured. Then use a data acquisition device to bring the measurement into LabVIEW, for graphing, analysis and data logging.
what a confidence level... i like it...
@sazer123 Hello. If your panel meter has a communications port, you might be able to get your data directly into LabVIEW that way. Serial standards like RS-232 or RS-485 are fairly common in industrial automation, and LabVIEW has built-in functions to interface with serial drivers.
Got my first couple of questions answered, very informative - thanks! :)
Hi Vinit, watched your videos, they all are very informative. We are having Ni myDAQ system and we want to do continuous monitoring of voltage over lab view. We are working on one project in which we are using a photomultiplier tube (PMT) to sense low-intensity light. The PMT gives output in voltage (equivalent to light intensity) and we want to see the output of PMT over Labview using Ni myDAQ system. We have tried so many times but were unable to configure PMT and DAC system. Kindly please help us in this regard. Looking forward to here from you. Thank You
How can we select the best sample frequency and Number of Sample ? ( I know that frequecny
Hi guy, could you guide me how to measure current ? Thanks you.
Do we need bus power device to use DAQ Assistant?
@MrRushabhT There are some people on our forums already interfacing LabVIEW and the Atmega32. Please visit our forums at ni dot com slash forums or Google "LabVIEW Atmega32". Hope this helps!
Here in 2022 let’s go