51 year old Navy vet here,had a garage door business for 15 years,amateur welder for 20 years,going to welding school Jan 22. Good content ,good instruction. Thanks !!
My school sucks my teachers never went to detail about the distances and the pattern it needs I learn by asking everyone that’s more advance then me taught me a lil a about welding I felt like I’ve been doing all of this on my own but with you I feel more complete with the lessons and ways to weld right
Mr Jody, I would like to thank you personally for your video and experience. I am being trained (so-called train, we're just given scrap and told to weld - but we are on the clock so that's cool) on welding trailers. I wasn't getting the best consistency on my welds so I looked at your videos. They specifically said to push and whip with the wire, but I decided to use your method and pull instead. Instant change. Better control, better consistency, and I know the weld penetrated extremely well. Thanks a lot.
Thank you man I went to a free program for my weld certificate and they treated me with no care and little help so when I show up to these interviews I’m left in a blind spot about a lot of stuff but your whole page on UA-cam has been saving me
Thank you for making this! I attended welding school during high school, welded a few year and learned CNC (Mill). This brought EVERYTHING back! Thank you for helping people out here!
EASILY the best welding tutorials on the internet... I have learned so much from this channel in just a few months and I'm actually not half bad based on the knowledge I got here! Thanks for making these!!!
New subscriber here... just want to say your content is so refreshing after watching so many ego driven welding instructionals!!! Everything is about function, practicality and efficiency and then you back it all up with science!!!Thanks for sharing your knowledge!!!
Jody now even my kids know you :)). What they don't know is how I came across you back in 2011 when I was struggling with purging some 16" stainless pipe for Harrods in London. with your tips and tricks I did a good job and bought a nice little car with that money :). Also learned from you how to do a vertical fillet MMa ... I should make in one day a list on how many things I learned from you . Basically that job started me off on deep sea, high pressure projects. So thanks a lot for teaching me how to make loads of money. Keep up the great work you do. God Bless you and your family.
Just a rookie here, sure like what I see. Practice is the key and I like you style of explaining the process with importance of good penetration over looks
I generally use the “v” technique for downhill, great penetration and clean controlled edges. I used to weld 11 gauge downhill mostly 12” at a time non structural so id play with settings and just make it pretty. Roughly 18 volts with a slower feed rate, never disappointed.
Hey Jody I bought my first welder about 3 weeks ago and tried to welding in my shop needless to say it didn't go so good but now with all your help I'm much better thanks man
Thank you so much for being slow with your teachings I'm a slow learner and a first time or a welder I appreciate you taking your time and explain things so I can understand that thank you hopefully I'll become an awesome Wilder like you again thank you
To me you are the best youtube teacher welder. My welding students are crazy with your videos, even without understanding english, they use the automatic subtitled translator and It help them a lot. Your quality videos are improving since I become your fan long time ago. I think that you could increase your worlwide audience by adding some kind of overlap information in scientific notation(1/8"---3.2mm). The AWS Welding Handbook recomends to use scientific notation as a means of share knowledge arround the world. God job teacher!
Gotta say the clarity on your videos has come a long way since I first found you in 2014 Jodie. Really impressed with your instuctional videos and am eagerly awaiting my tig finger in the post. Proud to support your habbit and thanks from UK
Love the video on this. The close up of the puddle and the graphic showing the pattern. Makes it very clear what is happening. You going to WBC this year?
Nice. Thank you! You teaching. My Miller 211. Side job's. Cha-ching$$$. I do restaurant stainless repair and non-structural homeowner stuff! But no automobile.
Love the videos! As well as the podcast! Could you possibly do a video on inner shield 233 wire. A lot of ironworkers struggle getting certified on this wire. And that’s the test that will certify all of our members on all flux core wire. Which is a the majority of all structural welds. I know hundreds of people I’ve met out in the field that watch your videos. It would help a lot of our members get more information on the wire. And welding with a drag angle on a verticals which is so strange lol. Thanks for the videos! Keep up the good work!
Hello, I thank you very much for this valuable information in the field of welding and thank you again for drawing the graphic lines that illustrate the way the wire moves. I hope that there will be a translation into Arabic so that I understand what it says and learn from you more experience😘😘😘
Jodi looking good bro! I can’t wait for you to get a million subscribers. You helped countless people thank you for all you do, I own a stubby has lense kit, tig finger, tig finger XL , the LeSquare and the strong hand tools mag tab 👍🏼
Thanks for the video and sharing your experience. That's how we new people learn... I'm just a hobby welder, so I already have bought what I need from your online store. I will try to buy more in the future. Thanks again.
ifell3 you can buy a Klutch st80i tig welder for around $280 at Northern Tool. Plus $250 for argon bottle,$20 regulator (Amazon) and $10 filler wire. The welder comes with tungsten. It welds good to start you out.
ifell3 well the st80i is not AC so your stuck with mild steel and stainless. I can’t recall the duty cycle at the moment but it’s never stopped on me so far. I would also like a tig that could do aluminum as well.
Jody , by the 2F weld why you go first up forward. (+ 3.04 min ) On the other side of the pond we learn always (I = 30 years ago) first go down forward because you can drag " dirt " under your weld. First down and than up to fill your undercut (banana shape movement ) Same when you weld from left to right you go anti clockwise by circle movement and never clockwise because you can drag " dirt " under your weld (imperfections or silicates ) But like always a good video = Best welding youtube channel
On the vertical up hill weld did you turn the setting down to the next welding thickness and go 10% less wire feed speed or just turn to the next lowest?
I was trained as a repair welder fixing robot errors. I wasn't properly trained or certified. I practiced during break times so it looked like I was a natural when being trained. So they left me to wing it and figure it out on my own. It always passed inspection so I guess I did it right. I had to get a pacemaker so I had to end my welding career. I really wanted to get certified.
At about the six minute mark when you changed the ground, you could really hear the machine just smooth out and sound great. I took your advice from one of your other videos and bought a one inch wide piece of copper braid. 👍
Thanks for showing how to weld according to the chart. Tough stuff right there. Me and my work partner weld all day every day.... it's hilarious how we had a discussion about tip to nozzle end clearance just the other day, him having his flush like you do and mine being about 3/8 distance like it should be... I'm sure there's no correlation between that and his tip getting trashed every other day while mine stays good for about 2 weeks.
51 year old Navy vet here,had a garage door business for 15 years,amateur welder for 20 years,going to welding school Jan 22. Good content ,good instruction.
Thanks !!
Good for you DC! It’s never too late to start on a new path!
Respect
I like the yellow path visualization before you actually show the welding path.
For a rookie like me, it’s a great visual aid. 👍🏼👍🏼
Bret Lambky agreed. Somethings are verbally explained in videos but the yellow drawing makes the idea very clear.
@@Tetracarbon ¹
@@Tetracarbon 21110
Being a self taught welder, I really learn a lot from you. Much appreciate.
ব
বব
বব
ব
ূ
Thanks bro. I'm 72. Amateur welder using arc welding. Just purchased a mig. Your vid is excellent. Thanks again.
My school sucks my teachers never went to detail about the distances and the pattern it needs I learn by asking everyone that’s more advance then me taught me a lil a about welding I felt like I’ve been doing all of this on my own but with you I feel more complete with the lessons and ways to weld right
Was getting frustrated today and then i watched your video and it completely changed the way i do mig. Thank you so much
Mr Jody,
I would like to thank you personally for your video and experience. I am being trained (so-called train, we're just given scrap and told to weld - but we are on the clock so that's cool) on welding trailers. I wasn't getting the best consistency on my welds so I looked at your videos. They specifically said to push and whip with the wire, but I decided to use your method and pull instead. Instant change. Better control, better consistency, and I know the weld penetrated extremely well. Thanks a lot.
Thank you man I went to a free program for my weld certificate and they treated me with no care and little help so when I show up to these interviews I’m left in a blind spot about a lot of stuff but your whole page on UA-cam has been saving me
Easily the best welding tutorials on the internet. I have learned so much from this channel in just a few months. Thank You.
I have been watching this channel for years, and I must say he keeps it simple, and he just keeps get better and better, iron sharpens iron.💯👍🏾
I've studied welding for a few years now but I never considered how much a proper ground matters with MIG welding.
I learned something new today.
Thank you for making this! I attended welding school during high school, welded a few year and learned CNC (Mill). This brought EVERYTHING back! Thank you for helping people out here!
the use of your left hand is the best I have ever seen, gives total control.
EASILY the best welding tutorials on the internet... I have learned so much from this channel in just a few months and I'm actually not half bad based on the knowledge I got here! Thanks for making these!!!
i never stop learning watching and listening to your videos
I m in school honestly I feel like u explain better than the guy up there in school
New subscriber here... just want to say your content is so refreshing after watching so many ego driven welding instructionals!!! Everything is about function, practicality and efficiency and then you back it all up with science!!!Thanks for sharing your knowledge!!!
Jody now even my kids know you :)). What they don't know is how I came across you back in 2011 when I was struggling with purging some 16" stainless pipe for Harrods in London. with your tips and tricks I did a good job and bought a nice little car with that money :). Also learned from you how to do a vertical fillet MMa ... I should make in one day a list on how many things I learned from you . Basically that job started me off on deep sea, high pressure projects. So thanks a lot for teaching me how to make loads of money. Keep up the great work you do. God Bless you and your family.
Just a rookie here, sure like what I see. Practice is the key and I like you style of explaining the process with importance of good penetration over looks
Hello from the Tajikistan 🇹🇯🇹🇯🇹🇯🇹🇯🇹🇯
I generally use the “v” technique for downhill, great penetration and clean controlled edges. I used to weld 11 gauge downhill mostly 12” at a time non structural so id play with settings and just make it pretty. Roughly 18 volts with a slower feed rate, never disappointed.
Great new content!! Loving the clarity of the video and the screen capture of the electrode path. Thanks Jody!
Your videos and style of teaching/showing is hard to beat!
TakeCare,
Bill
I liked the fact of all the good information he gave it was clear and to the point as it should be
People should do the in that on the job as well
Hey Jody I bought my first welder about 3 weeks ago and tried to welding in my shop needless to say it didn't go so good but now with all your help I'm much better thanks man
How ya going now ?
No matter how experienced you are, always to learn more
Thank you so much for being slow with your teachings I'm a slow learner and a first time or a welder I appreciate you taking your time and explain things so I can understand that thank you hopefully I'll become an awesome Wilder like you again thank you
To me you are the best youtube teacher welder. My welding students are crazy with your videos, even without understanding english, they use the automatic subtitled translator and It help them a lot.
Your quality videos are improving since I become your fan long time ago. I think that you could increase your worlwide audience by adding some kind of overlap information in scientific notation(1/8"---3.2mm). The AWS Welding Handbook recomends to use scientific notation as a means of share knowledge arround the world. God job teacher!
Thank you for this video. It's really helped me understand how to use a MIG welder.
I'am construktion febrication worker from Indonesia.,like your welding vidio,thanks for sharing., fery good job.,
Thank Jody for the great tips on Mig and Tig welding I have learned a bunch so far.
Just bought the gloves and magnets. Can’t wait to try them. Thanks Jody for all your videos and knowledge man. Glad I could support you allittle
Gotta say the clarity on your videos has come a long way since I first found you in 2014 Jodie. Really impressed with your instuctional videos and am eagerly awaiting my tig finger in the post. Proud to support your habbit and thanks from UK
Your welds look amazing!!
Nice job thanks for your advice and teaching you help us to improve in mig
Thank you for the great videos , great editing and content !
Great tips (no pun intended), I learned loads. Thanks
Great content! As a newbie really helping me get better.
Thanks Jodi. Awesome illustration of the technique for the various positions. Thanks for sharing. ( Andrew).
You are maybe the only professional that I have ever heard say that you get more penetration pulling mig. And I totally agree!!!
Thanks Jody, I learn something every time I watch your videos.
holy video quality batman!
Love the video on this. The close up of the puddle and the graphic showing the pattern. Makes it very clear what is happening. You going to WBC this year?
hey Chad, I might be at WBC...gotta play it by ear
weldingtipsandtricks drinks are on me. 🍷
weldingtipsandtricks hi wanted to ask for some tips to keep in mind when welding uphill with 6010 and downhill
Greetings from Serbia!
I worked in North little rock...a 3 years ago...
I Love your equipaments and your technoligy....
Nice. Thank you! You teaching. My Miller 211. Side job's. Cha-ching$$$. I do restaurant stainless repair and non-structural homeowner stuff! But no automobile.
Just here to watch this as my stress reliver. End up learning something. 😊
Thank you Jody! Great video! Be blessed!!!
Sir i relly lovevwatching your vedo ..i learn a lot. Thnks sir
Love the videos! As well as the podcast! Could you possibly do a video on inner shield 233 wire. A lot of ironworkers struggle getting certified on this wire. And that’s the test that will certify all of our members on all flux core wire. Which is a the majority of all structural welds. I know hundreds of people I’ve met out in the field that watch your videos. It would help a lot of our members get more information on the wire. And welding with a drag angle on a verticals which is so strange lol. Thanks for the videos! Keep up the good work!
I really learn a lot from you sir im from Philliphines hope i got those black gloves someday 😁
Great video, can't wait to try it out. Good looking shirt bud, you look ripped from hitting the gym!
Fantastic as always... great camera
Hello, I thank you very much for this valuable information in the field of welding and thank you again for drawing the graphic lines that illustrate the way the wire moves. I hope that there will be a translation into Arabic so that I understand what it says and learn from you more experience😘😘😘
Excellent Video on MIG/MAG Welding. Good Presentations. Keep up the good work.
Your videos are awesome and super informative
Welding is how this Dad is gonna male the donuts. Dome a lot of lines of work, and welding is a proper trade.
Jodi looking good bro! I can’t wait for you to get a million subscribers. You helped countless people thank you for all you do, I own a stubby has lense kit, tig finger, tig finger XL , the LeSquare and the strong hand tools mag tab 👍🏼
Waw simple technique,,,i want try this tachnique,,
Tq sir
Thanks for the video and sharing your experience. That's how we new people learn...
I'm just a hobby welder, so I already have bought what I need from your online store. I will try to buy more in the future.
Thanks again.
Super spl Thank you use full video..I am waiting welding job vacancies your favourite fans sir
Germany 🇩🇪 says Thank You 👍👍👍🇺🇸
👍👍👍👍 I love all your videos they're very interesting
You are so amazing information and you make me learn from you and I started from empty now my weld look better. Thanks
Great video and great weld. Very nice. Looks good
Yey thumbs up for a bit of MIG, do like a change from the TIG this and TIG that!! Only because I cant afford a TIG!!!
ifell3 you can buy a Klutch st80i tig welder for around $280 at Northern Tool. Plus $250 for argon bottle,$20 regulator (Amazon) and $10 filler wire. The welder comes with tungsten. It welds good to start you out.
@@ethantroy311 They got good duty cycle on them? But my guilty pleasure would be more for aluminium tigging!!
ifell3 well the st80i is not AC so your stuck with mild steel and stainless. I can’t recall the duty cycle at the moment but it’s never stopped on me so far. I would also like a tig that could do aluminum as well.
@@ethantroy311 is that thing high frequency start or scratch?
ifell3 it’s scratch start.
Awesome welding videos, this has helped me in my welding career many times that you for the great videos
Jody , by the 2F weld why you go first up forward. (+ 3.04 min )
On the other side of the pond we learn always (I = 30 years ago) first go down forward because you can drag " dirt " under your weld.
First down and than up to fill your undercut (banana shape movement )
Same when you weld from left to right you go anti clockwise by circle movement and never clockwise because you can drag " dirt " under your weld (imperfections or silicates )
But like always a good video = Best welding youtube channel
Excellent, as usual.
Always Golden Advice mate ✌️🤩
Well done. Always the best videos. Thank you.
Thanks as always for the great content.
This man is a damn welding genius
C'est un profésionnél j'aime les profésionnél dans leur domaine ❤
Nice shirt brother 👍🏼😍🤘🏼
You’re sputtering still looks better than my best welds 🤣💪🏻
whenever it comes to welding, especially mig, my first thought is: what would jody do?
@19brownboy81 👍😉
John-Galt that’s the most reasonable thing to do.
U are the greatest man
Awesome video Jody you the man 👊🏻
My brother inlaw is a certifide welder and he won`t show me jack ! I know a little from my job, thank you alot sir.
Amazing teachings!
Отличные специалисты, знают дело! Привет из России)
Nice looking gloves Jody!
Have a vertical, overhead and flat mig test on Monday. Wish me luck guys
Cool tricks. Thanks!
Always awesome instruction, video quality! 👍 I spy JG mig gun holder👍
On the vertical up hill weld did you turn the setting down to the next welding thickness and go 10% less wire feed speed or just turn to the next lowest?
Nice ❤❤❤
I was trained as a repair welder fixing robot errors. I wasn't properly trained or certified. I practiced during break times so it looked like I was a natural when being trained. So they left me to wing it and figure it out on my own. It always passed inspection so I guess I did it right. I had to get a pacemaker so I had to end my welding career. I really wanted to get certified.
At about the six minute mark when you changed the ground, you could really hear the machine just smooth out and sound great.
I took your advice from one of your other videos and bought a one inch wide piece of copper braid. 👍
mrbigg7255 I sacrificed a small piece of an old lead it works great
Man I remember when your hair was black and mine was thicker. Thanks for all the time you put in.
Thank you welder
Thanks for showing how to weld according to the chart. Tough stuff right there. Me and my work partner weld all day every day.... it's hilarious how we had a discussion about tip to nozzle end clearance just the other day, him having his flush like you do and mine being about 3/8 distance like it should be... I'm sure there's no correlation between that and his tip getting trashed every other day while mine stays good for about 2 weeks.
Great information!
Thanks really helps a lot !
Très instructif
Merci beaucoup
Monsieurs
You sir, are a frickin machine.
Thanks Jody, id like to see a video on fcaw and the techniques you use with that process.
Take Care, big fan.
Hi Jody. It would be nice if you had an Internet-based “dvd” series that people could buy. Just a thought. Love your work and thank you. Stephen
Love these videos, learn something new every time. Now I'm looking for ~6" of copper braid.