Toyota Yaris 1.0, 1.3 VVTI MK1 and MK2 Petrol Camshaft Sensor Change. Fault Code P1346 and P0340.
Вставка
- Опубліковано 2 жов 2024
- Toyota Yaris 1.0, 1.3 VVTI MK1 and MK2 Petrol Camshaft Sensor Change. Fault Code P1346 and P0340.
#camshaft
#camshaftsensor
#toyotayaris
Disclaimer:
The content used in my videos are intended for educational and informational purposes only. I do not take any liability or responsibility for any damage caused while viewers trying similar type of practices on their properties. All rights to the images, music, clips, and other materials used belong to their respective owners. I do not claim ownership over any third-party content used.
Copyright Disclaimer:
Under section 107 of the copyright Act 1976, allowance is mad for fair use for purpose such a as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statues that might otherwise be infringing. Non- Profit, educational or personal use tips the balance in favor of fair use.
Hi Khan, great video as always. I've seen your previous video regarding P1346 DTC. I'm fighting a P1346 code myself at the moment. Just P1346 pending and stored. Car runs absolutely fine otherwise. No idle trouble or rough idle.
What symptoms was this car showing before you changed the sensor? Obviously engine light but anything else?
There wasn't any bad symptoms as such but the engine light kept on failing the mot so that's why I changed the sensor.
There are two crank sensors in my Yaris vehicle, one is on top and the other is on the bottom. I checked both of them and they are working, but there is a p1340 fault code, where could the fault be? Can you help???
@@ugurg2273 have you checked the harness or the connectors. I would chase the cables to look for any damage
@@diykhanI checked the sensors, let me check the wiring harness with a multimeter, thank you for your help, a technician told me that she would remove the timing chain and reattach it.