Safe Lightweight Wood and Brick Cutting Grinding Bits | Graff Speedcutter
Вставка
- Опубліковано 8 вер 2024
- #speedcutter #sculpting #woodcutter
Safely Cut Wood and Light Brick Carving | Graff Speedcutter
Hello DnD Workshop
okay, this is a graph speed cutter. namely grinding wheels to cut and carve wood, plastic/acrylic/pvc and even aerated concrete. In Indonesia, light brick and GRC can be exemplified.
Here Graff introduces a new design for his speed cutter, which is claimed to be safe for cutting wood using a grinder. In Indonesia there are many speedcutters like this circulating, the title says the brand is Graff, but in the photo the item is not the Graff brand, so if you want to buy make sure to chat with the seller, is it the original Graff brand or not
The product we get is 115mm or 4.5 inch in diameter. if you need a bigger one, there is also a 5 inch size. adjust to your needs. unfortunately there is no 4 inch size, so it can't be installed on a small grinding machine like this.
Now for the test later, I will install this speed cutter on the Hitachi 5 Inch grinding machine. The maximum RPM of this Graff speed cutter is 13,200, while the grinder that I will use later has a speed of 11 thousand rpm, so it's still safe.
okay, next, we test to cut aerated concrete or light brick. I have outlined here, we cut around, because the knife is not this deep, yes, the thickness of this lightweight brick is about 12cm so later there will still be concrete left in the middle after we cut it, we just beat it with wood and the result is like this.
Well, in addition to cutting light bricks, because the grinding wheel of this Graff speedcutter can be used for aggressive carving, you can also make ditches to plant water pipes or electricity pipes like this. even here, we directly demonstrate how to make pipe branching inside the wall very easily.
Then how about making wood chips? If you can only carve light bricks, let alone carve rough wood materials, friends, it's definitely possible and fast. but because the speed of the speed cutter is very aggressive, the results are a bit rough, so you need to finish using a few grits of sandpaper so that the results can be as expected.
Feature:
The circular cutter head is made of hard alloy and firmly fixed on the group by silver welding, and then polished to a sharp edge in all directions.
Tungsten carbide ensures safe drive operation, creating the optimum radial impedance allowed at high speeds.
Utility :
for cutting: wooden boards, MDF (hardboard) and chipboard, floor laminate, plasterboard, parquet (hardwood), plastic and PVC, plywood.
Specification:
Blade Type: Circular Saw Blade
Material: Carbide
Outer Diameter: 125mm
Inner Diameter: 22mm
Thickness: 2.2mm
Gi: 3T
@GRAFF Speedcutter
DnD Workshop
Instagram @dnd_interior
Business: dndworkshop.id@gmail.com
+62 81234 37 0004
mesti dibeliin dudukan gerinda tuh, gerinda tangan berubah jadi gerinda meja, sy bikin sendiri utk dudukan gerinda, jadi kayak circular saw, motong multiplek panjang ada guide nya, jadi lurus
siap om
Maksih bang tugofialnya aku perlu itu mata grendra buat kayu biar aman
sama2
Hadir bang, walo aga telat 😁👍
Siap. Terima kasih bang
Hadir👍👍👍
Terima kasih bang
👍👍👍
Produk stalinium nih bos.... Senggol dong....... 👍😁😁
uraaaa hhahahah
salfok sama scroll saw nya, apakh merek Oscar ya bg 😁, untuk pesan mata potong kayu untuk gerinda tangannya gimana bg yg asli, bagi2 info nya dong bg...
scrollsaw krisbow om hehehehe. skrg sepertinya stop produksi karena perang Rusia
betul jawaban @backpacker062
😢 untuk belah multiplek bisa gk om soalnya gk punya circular saw tapi adapter circular saw nya punya😢😢
Jauh2 amat smp ke belarusia belinya, dsni juga banyak min 🤣
Apakah saya bilang beli di video tersebut? 🤣 dan sudah saya bilang di tokopedia ada, bahkan saya kasih tahu harga di tokpednya
@@dndworkshop Sabar om, netizen emang gitu kan wwkwkwk 🤣
Lebih bagus handle samping gerinda dipasang grip bisa lebih stabil, di indo saya lihat tukang2 jarang pakai handle samping padahal ada di paket pembelian gerinda tidak jarang juga cover pelindung mata gerinda tidak dipakai.
Betul bang. Terima kasih masukannya. Punya saya kebetulan hilang hehehe...
Ribet kalo pake cover garis potong nggak keliatan
😲
mantap cak. auto tak subrek.. 👍🏻👍🏻😃
untuk membelah bisa gak kang?
Terima kasih. Bisa om
hadir mas.oghya mas sy ntn vid yg table saw nrtpro 7 inc tsb.kpan mas di uprgade tabletopnya jd lbh besar sepwrti tablesaw 10 inch
Kalau upgrade ke 10 inch saya rasa harus gulung ulang tembaganya. Dan daya nya bisa lebih tinggi
@@dndworkshop mgkn kalau untuk tabletopnya bisa yh mas diupgrade jd lbh lebar dan presisi lg.mhn dibuatin tetorialnya mas hehehe dan cara kalibrasinya agar bs presisi lg
@@donnyjoebimbim5025 sudah ada om. Cek video lainnya ya. Posisi sudah ada table top dan track nya
Lubang arbornya ukuran btapa bang ?
Berapakah diameter lubang nya apakah bisa kira kira di pakai di mesin circular saw kecil, sepertinya kecepatan potong nya lebih agresif( cepaat) asik jugak
22.5 mm. Beli yg 5 inch kalau mau dipasang di circular saw
Di topedia kok gak ada ya bang
Dishopee ada bang
Bisa buat gergaji table Saw gak bang?
seharusnya bisa bang. tapi belum pernah coba
Mas itu d pasang marble cutter in bisa gak
kalau arbornya cocok seharusnya bisa om
Ini lobangnya sama dengan mata potong keramik 4 inch gak om?
ga sama om. pake ring adapter
Untuk belah belah papan cukup cepat ndk?
Cepat om
@@dndworkshop harga brp?
Kalo dipasang di grinda yg 4 inch lubang as nya apa cocok bng.
sudah saya coba ga bisa om
Bisa tp harus pake ring tambahan, ada di jual online 4rban
bang aku punya mata potong yg sama kayak gitu yg ukuranya 125 mm atau 5 inci tapi aku pakai memotong kayu papan kok keluar asap ya heran aku
lha, kebalik itu hehehehe
apa perlu di atur kecepatan gerinda nya
tdk perlu om
Lewat aplikasi apa bg mesan tools dr rusia?
Dikirimin untuk review om dari pabriknya
potong plywood rapi nggak mas ?
Potong kasar ini mas
@@dndworkshop oke
Buat belah kayu aman ?
aman om
Merk apa itu mas gerinda potong kayunya beli dmn?
Graff. Di tokopedia ada
@@dndworkshop boleh minta link pembeliannya bang .. makasih
Bang krangjang kuningnya mana? Link pembeliannya
Cari di tokopedia om. Pastikan merk Graff. Waktu video ini dibikin, barangnya blm masuk indonesia
@@dndworkshop SIAP bang, tks infonya
Apakah bisa buat belah kayu bang ?
bisa om, tapi kasar
Harga nya berapa an
ga sampe 100 mas
Aku mau beli om😂😂