Do NOT use a socket to hammer the bushing in. Get a piece of pine and use that. These bushings are made of brass- or copper I’m not too sure- but a soft metal that’ll deform when impacted with a harder metal. The shaft of the transmission might not go on properly, or at all if it’s too mushed.
My flywheel isn't slip fit to the crankshaft like that, P/N 41018 onto a 2005 VQDE... doesn't seem like I should be hitting it with a hammer to get it on
There's a small lip the pilot bearing will sit up flush with. You basically tap it in until it meets. It's very difficult to push it past that unless you are bashing it in with force
Do NOT use a socket to hammer the bushing in. Get a piece of pine and use that. These bushings are made of brass- or copper I’m not too sure- but a soft metal that’ll deform when impacted with a harder metal. The shaft of the transmission might not go on properly, or at all if it’s too mushed.
for sure, you risk mushrooming the surface area of the bushing..
Y'all made it easy to understand. Great video
You have the right tools 👍.
Love the install videos
I don't even own a z no more and I'm still watching your videos haha
Good video, though I'd add loctite to the flywheel & clutch bolts so they don't rattle loose over time.
I was thinking the same thing, either medium strength or permanent would be OK
They obvi not pro
@@ZeroFX32 Medium only. Clutches dont last forever and you might be the next guy working on it.
I thought he was going to say to wear eye protection for the clutch dust. He was too worried about the floor instead of his eyes.
lmaoo fr
Can I reuse the original flywheel bolts? Need to know before I start installing my new clutch
My flywheel isn't slip fit to the crankshaft like that, P/N 41018 onto a 2005 VQDE... doesn't seem like I should be hitting it with a hammer to get it on
Same here let me know how you got it on
Trying it now and I can’t get it on
do you need to put thread locker on the flywheel and/or pressure plate bolts? If yes, do you use blue or red?
How much torque and hp will this clutch handle?
Where did u get the sliding hammer from?
Does it come with new flywheel and clutch bolts? And this is all the same as the 370z/ g37?
Just ordered a kit from them, it does not come with bolts. They do sell OEM bolts at a decent price though.
I can’t get the fly wheel on so easily what am o doing wrong
How far in shoud the new bearing go, I know you said not too far. Appox how many mm from the face should it go in, or should it be flush?
There's a small lip the pilot bearing will sit up flush with. You basically tap it in until it meets. It's very difficult to push it past that unless you are bashing it in with force
how do you torque when the flywheel is moving?? also you can use a wrench to the wheel from moving when tighting it
Get a 19mm socket and bar on the crank shaft pulley and get a mate to hold it.
How far is to far
Completely forgot to show us how to install the throw-out bearing which is part of the kit
I need for 2007 3.5 se 6 speed??
“About right there is where you want it to be installed” doesnt show where 😂😂
Just hammer it un but not to far and then dosnt say or show what to far and npt to far 😂