Dumpster Diving, Getting Distracted by Better Scrap Hauls!
Вставка
- Опубліковано 25 лис 2022
- Went out planning on doing a full day dumpster diving, but ended up chasing down some scrap pickups from friends who called us in! Still found some great dumpster scores of course, and always super grateful for the help. There were some materials to take home afterwards too! There are plans for this stuff, mwua ha ha!
Wire stripper I use: amzn.to/3jrO2iS
The motorized stripper: amzn.to/3y0JMuQ
The wire cutters I like: amzn.to/2T6j3OW
This is the cheaper version: amzn.to/2SwrYsB
And here are those grips I recommend: amzn.to/2QCJmYl
(If you make a purchase on amazon through the links above, a small amount of what amazon makes on the sale is shared with me. It's a great way to help support my channel, at no additional cost to you. Even if you buy something other than my tool recommendations!)
Please like/share this video if you enjoyed it, and subscribe to thubprint!
/ @thubprint
I love mail! You can send me some here if you like:
Thubprint
PO BOX 99900 RF 764 740
RPO WESTBROOK
CALGARY AB
T3C 1B6
/ thubprint
/ thubprint
I work in the door industry. A lot of the hinges that you find on doors are steel, but certain models are brass. It doesn't matter what the finish is it can still be brass.
Those rails you put on the truck ages ago have sure helped with loads like this! Well done Thub! 😊
scrap was at 140 a ton but haven't checked in months
You are one of my favorites, Thub. You explain things as you work: categories and the type of metal/steel/tin etc. That is really appreciated. Plus, you are genuine! Oh, and maybe stop jumping off your truck bed? It hurts my knees watching that.
😆 thanks Donna! I can’t promise not to jump out of the truck though, it makes me feel like Spider-Man!
I straighten t-post by sticking it in my trailer hitch. I imagine If I needed one bent in half I would have tried that.
I use the dumpster itself, one can find a way to bend a lot of stuff with just a little ingenuity.
You make me happy. Thanks.
Watching Thub , stripping cables and a couple of old T.V's while having a beer and a special herbal cigarette
Now that's a perfect Saturday evening
That dumpster was stuffed, to the point of being unmanageable, good call
As Mike the scavenger would say, ya gotta be strong in this world!
Man you are the bob Ross of scrapping
If I jumped off my tailgate the first thing to hit would be my feet followed by me knees but luckily my fall would stop when my face was planted on the pavement!!!!! Good haul!
😂 oh dear! It almost sounds like you’re speaking from experience lol
Those fans are worth keeping for ventilation in the warmer months.
FUN! Keep burning those bridges as you come to 'em!. "Preciate you right back, Thubbie.
Wow good stuff.
Don't give up, one piece at a time can move a mountain! Keep it up!!!
Thank you for your full cooperation
당신은 응원합니다 영상을 잘보고있어요 오늘도 내일도 축복이오길바랍니다🇰🇷👍💖
I like it that you are realistic. I wish I could be like Mike heck I wish I could be like you, But being a 58 and a woman I just don't have the might I used to. I don't let it stop me. I just do what I can. Thanks for all you have taught me
I love your videos
Thanks for taking us on another adventure.
get it all
Dude, If you help me emigrate to the place that you are located, I could easy live in your scrap yard, help you collect various metals, break them down, and help you film this, you would't even need to pay me a dime, just a small cut of the scrap. Looks like heaven. Love your videos. I'm super happy that youtube recommended me this channel. good quality content here. keep it up
I’ve watched almost every one of your videos over the last 3 weeks
Great video I do drive a roll off truck and you would be amazed at the amount of steel we dump at the landfill
Nice haul of scrap 👍
Hey buddy. I hope you and your family are doing well. My that is a lot of rotors LOL.
Thank you, yours as well! And yeah, I’m always amazed at the size of the heap they stack up there. That’s even kind of small for them, it looks like they just shipped out a container.
The gray furnace had copper for the heat coils
Nice haul, and I think a lot of us know what it’s like to have good stuff in a skip be “unavailable” due to a few hundred pounds of stuff sitting on top of it. Thanks for another great video!
İ'm guessing that i'm the only one who thinks that trying to restore the fans would be time better spent than chopping them into their constituent parts.
Yeah thats what i thought thanks for the info.
Found few new scrappers from their comments on other scrappers videos. Entertaining video Thanks for sharing!
very cool disks
Hey man I like your videos. I'm almost ready to start trying it myself.
Thank you! It’s a pretty fun hobby and doesn’t really need a whole lot of tools to get into. I hope my videos can help you quickly figure out how to make the best use of your time!
Nice run! Congrats on the new forge. I have a big one and a little one... you may have hit on the just right one!
I’m pretty pleased with it! Was worried the smaller crucibles may not work very well in that big can but they seem to run great
Those bottle bags are huge
save the plants!!!!!!!!!!
I've noticed watching other scrapper videos that most scrappers don't see the value of certain things beyond the scrap value. And most don't seem to know how to do any other job besides collecting scrap metal, and most can't identify the non ferrous from steel or iron without a magnet.
Got my bottle bags today love them so much can't wait to fill them thankyou so much for being you keep doing the thing ✌️🤘
7:50 saw that coming!
Another great video, I love how you engage with your audience and you don't leave them wondering what's going on. Plus why you don't make a big deal with it you can easily tell that you enjoy doing the work. Your videos are definitely less about scrapping and our bottle picking their about Adventure and you definitely show us an adventurous time. I agree with one of your other commenters when they say you're the Bob Ross of scrapping have to fully agree, because you've often provided a calming effect on me when have been upset about something usually after having a run-in with a Karen or Kevin just wanting to cause me problems if you know what I mean. Thanks again for your wonderful videos and I hope you and yours are doing good. Can't wait for another adventure with thumb the Scrapper man, but maybe get some knee pads because us old guys whenever you jump filled-in those knees of ours haha.
Your my favorite youtuber Thub keep it up👍
Thank you so much! I’m very grateful to be here, all too happy to keep bringing the best videos I can 💙
Thanks for the vids dude.
You inspire me to go work on my scrap pile...
Keep up the hard work.
He worried about hitting a car outside dumpster with scrap. Much more common for scrappers to not secure dumpster door & a guest of wind blows it into a car, etc.
Scrap metal prices are way down where I live in the United States.
Nice haul Thub!
Hey Thub. Great content lately. Keep it up broski!
i would hit that dumpster again it looked like a home depot dumpster great video
Yes, there are two very big springs in the brake servo. You have to put a special bolt in it to release the spring to safely disassemble it.
It amazes me how peoples brains can operate so differently. Meaning there would never be a day under any circumstances where I could chuck that heavy duty shelving into a trash dumpster. I tend to be judgey against those who would. But good for the scrappers I suppose.
Do you still go do your route of picking in the cans? When I first started watching you you did that in the bottles in the cans. Now you seem to be doing more scrap. I'm sure that brings more money.
To be honest, I miss picking cans sometimes 😅 collecting scrap metal is often better money but I wanted to move away from cans because it felt bad knowing I was potentially taking bottle money from pickers who need it more than I do. I’ll still make time to do it for a video here and there but scrap/dumpster videos seem to do better anyhow
@@CovidConQuitTheCensorship I appreciate the feedback! Really, it means a lot that you took the time to let me know how you feel. I do miss the adventures, and I am aware of what you’re talking about. I’ll have some treasure hunts keeping the focus on the exploring up next. I’m sure you understand why making “clickable” or “evergreen” content serves me well over the long term, but my intention has always been to sprinkle those in rather than focus on them. Thank you for being here with me, and thanks for communicating 💙
Trucks back!!!!!
I just hit- Share, Copy Link Thub! Might have to get scrapping in my 84 F250
Didn’t see you remove the little arms in the furnace that spit the natural gas out. The tips on those are brass and there are often 4-8 of them…. Very easy to recover(most of them will fit a socket)
Shred is 205 a ton here
Great Finds Bro!
Thanks buddy! All the best on your hunts!
@@thubprint same to you!
You took the time to pull the blower motors to strip later for copper but skipped the inducer motors and wire out of the furnace assemblies? Maybe #2 insulated and copper bearing motors not paying much in your area?
Have you thought of putting some eye hooks through your walls to attach your tie downs? I have two in the front on both side (one low and one high), two more spaced out down the side and two on the back. They are a game changer for being about to secure stuff standing up like water heaters
And before i forget what about circuit boards can they be recycled?
I'm betting your gonna put your chimney thru that metal piece you cut off that door. My father did the same for a old house furnace used in the garage.
need you a helper like your kids or someone who likes doing the scrapping me and my son does scrapping here and there
There was a lot of good stuff in that open top, too bad it wasn’t in a better place where you could’ve taken more time. 🤪
Gotta watch your step up there in the land of snow ‘n ice! 😎
Question’s: 1) You measured the window in inch’s, I thought y’all was metric?
2) Also why didn’t you clip the wires on the furnace’s and squirrel cage’s, low grade?
God bless 🙏🏼🇺🇸🇨🇦
I see so many things in the shred piles with wires dangling everywhere! What a shame 😔
All those little pieces add up, right?
Unrelated to the video, I have a question. Have you ever thought about getting a copper granulator?
Thub my man. Just started scraping. Retired & needed something to do & what better than to scrap & help the environment & having fun! I still have problems with identifying the difference between copper & copper covered aluminum. I don’t see the metallic color vrs the white color?? I’m a nube & still learning!! Keep the videos coming.
Not clipping wires?
That's all pallet racking for warehouse storage, the orange steel bar is the laid bearing, the wire racks with slats are the bottom that goes between two orange bars
Hey Mr Thub I'm from South Africa please could you explain how it works when you scrap stuff there, like how much do you the different material weigh I don't see you putting it on a scale. One love awesome video 📹.
They have big truck scales for the big tin/ferrous stuff and smaller ones to weigh non-ferrous stuff at scrapyards. Maybe they don’t want video inside where the valuable scrap is.
I LOVE YOU❤💚💜🎅
Don't they give more for iron rotors? You just answered my question..
Were you saying clink the copy link button helps? Or just sharing in general?
I’m talking about just clicking it! Of course sharing externally will bring a few extra views but I wanted to experiment with just copying the link because I don’t think the site can track if a user actually pasted it anywhere
Can plastic from appliances and old stereo equipment and such be recycled or is it just trash?
It absolutely can, but the city specifies what they can process in the blue bins and unfortunately my city doesn’t include plastic appliance housing on the list
Where do you get all that scrap metal
I hate it when it comes to taking everything out gently and keeping styrofoam out
do they pay more for your rotors they do here it's carbon steel
It is a bit higher yes, mine calls it “auto cast” but they do pay better than shred or prep
Does motors pay same as shred
13:42 curious- what was it? I like cutting stuff open, so it would be nice to know.
where do we find the merch?
Another note, why don't you strip the wire out of the air conditioners? I probably would.
What was that thing that had the internal tension?
It’s a truck spring brake chamber, and it stores spring tension to assist in creating brake compression. I had no idea until some folks pointed it out, it sounds like they can really blast off dangerously
And why are you not cutting the wire from the furnaces???
Is there a link to your merch?
why didt u want the wire u threw away
Say bro can I get a leave it better than the way you found it bag??? Lmk how much
Absolutely, they’re on my merch store! thubstore.com
@@thubprint thank you amigo keep doing what you’re doing and more blessings will come to you and your family
When you say called in to pick up scrap does that mean you advertise or do you have any advise to someone just starting out scrapping do you just go to business and ask alot? Do you ever get yelled at to go away?
Where are you from bro
Don't know what to make of it, King Trash Panda. Is it too much of a coincidence since I send you the so-called don''t know what it is bronze piece that a lot of blessings were coming your way? Could it possibly have a mystical properties to it?
Been watching 4 pass vids and it seems a possibility.
NOT, lol! As I mentioned a few vids ago, I noticed that you haven't been picking up bottles and such. Has your region stopped buy back redemption? Let me know....
So just a video of dumpster diving? That’s it?
I always see you throw away stuff with wires attached to them. Why not cut them off and put them in a bin.
I used to work a lot harder to collect every little piece of wire, but they’ve kind of lost their sparkle a bit. Wires are still good but the teensy tiny ones make very little difference to the total weight. At least that’s my perception
@@thubprint yeah, kinda true. I feel the same. But every bit counts. Also on a recycling-level. There is no planet B.