RC - Nissan GT-R (R35) Liberty Walk - Works

Поділитися
Вставка
  • Опубліковано 29 кві 2024
  • RC converted Nissan GT-R R35 from Micro City 87.
    When planning this conversion to an RC model, the premise was to build a vehicle for cruising and not for the race track. The focus was on the slow driving characteristics.
    As usual with most of my models, standard components were used.
    The gearbox was partly taken from a servo that had been cannibalized. The double gears module 0.15 used there are ideal if you want to use a gearbox without a worm.
    A total of three gear stages were used to achieve the highest possible transmission ratio. A 4x8mm motor is used as the drive.
    Power is provided by a 90 mAh Lipo cell.
    Everything is controlled via a Deltang RX45
    The rear lights also act as brake lights. A diode circuit was used which makes it possible to connect two switching outputs of the receiver to one LED and to use different resistors. This results in different brightness levels for the normal tail light and for braking.
    Construction report and further information:
    👉 www.der-theoretiker.de/fahrze...
    If you would like to say thank you and support this channel and my website, I would be very happy to receive a few children's bars. Nourishment is extremely important. Thank you so much!
    🍫 www.buymeacoffee.com/Theoretiker
    Don't want to miss any more content? Follow me on:
    👉 www.der-theoretiker.de
    👉 / mikromodellbau.theoret...
    👉 / der_theoretiker
  • Авто та транспорт

КОМЕНТАРІ • 17

  • @stanliddy2194
    @stanliddy2194 2 місяці тому +2

    ❤ Grossartig

  • @jorgpenning6576
    @jorgpenning6576 2 місяці тому +2

    Mega Cooles Teil. 👍🚘😺

  • @Bastelbub1965
    @Bastelbub1965 2 місяці тому +1

    Klasse Auto, habs ja auf der Messe live bewundern können!

    • @DerTheoretiker
      @DerTheoretiker  2 місяці тому

      Vielen Dank. Noch ein bisschen Tuning und der kleine ist fertsch. Grüße Oliver

    • @Bastelbub1965
      @Bastelbub1965 2 місяці тому +1

      @@DerTheoretiker der fuhr doch schon richtig gut!

  • @larsbienwald6916
    @larsbienwald6916 2 місяці тому +1

    Cool😃👍🏻

  • @TheCouchslouch
    @TheCouchslouch 2 місяці тому +1

    Moin, und er ist doch noch ans laufen gekommen,- schöne Arbeit!!! Grüße

    • @DerTheoretiker
      @DerTheoretiker  2 місяці тому

      Jep und er kann auch schön langsam fahren. Hier und da muss ich allerdings noch ein bisschen was optimieren. Grüße Oliver

  • @PoolModelRailroad
    @PoolModelRailroad 2 місяці тому +1

    Mega❤❤❤

  • @somedudewithakeyboard
    @somedudewithakeyboard 2 місяці тому +2

    Drift!

    • @DerTheoretiker
      @DerTheoretiker  2 місяці тому +1

      Yes, but no ;-) The weight and the physics are the problem. You can manage a donut without any problems, but controlled drifting is unfortunately not possible. It works with a race truck. Greetings Oliver

  • @axelgellisch9521
    @axelgellisch9521 Місяць тому +1

    Wenn ich das so sehe, einen PKW mit Fernsteuerung, frage ich mich warum Viessmann so ein Theater um seinen VW Volkswagen macht?!?!? ❤❤❤

    • @DerTheoretiker
      @DerTheoretiker  Місяць тому +1

      Das sind zwei unterschiedliche Dinge. Die drahtgeführten Fahrzeuge, egal welcher Hersteller, dienen aus meiner Sicht der Unterhaltung und drehen einsam ihre Runden. Der Nissan z.B. ist ein Prototyp, damit will ich Spaß haben, der soll nicht alleine fahren. Der wird auch wesentlich weniger Meter zurücklegen als ein drahtgebundenes Fahrzeug und ist auch intensiver was die Wartung und Pflege angehet. Was ist denn mit dem Käfer? Grüße Oliver

    • @axelgellisch9521
      @axelgellisch9521 Місяць тому +1

      @@DerTheoretiker Hallo Oliver, das ist der neue VW von Viessmann, aber ich hatte das nur für mich als Frage gesehen. Es ging mir um den PKW Maßstab. Danke für Deine umfangreiche Antwort .. Axel Gellisch

    • @DerTheoretiker
      @DerTheoretiker  Місяць тому +1

      Hi Axel, gerne ;-) man muss auch unterscheiden, das die Produkten, die man kaufen kann es eine Gewährleitung, … gibt. Das muss alles robust und leicht zu bedienen sein. Wenn bei unseren Modellen mal was kaputt geht, wird es „mal eben schnell“ selbst repariert. Grüße Oliver