Soviet vintage wristwatch movement | Cлава | SLAVA 2414 service form Second Moscow Watch Factory
Вставка
- Опубліковано 28 вер 2024
- SLAVA (Cлава) what means „Glory” with its 2414 movement was a classic wristwatch produced in the Soviet Union. This video is the second part of watch restoration. This soviet vintage watch from Second Moscow Watch Factory was quite popular not only in communist countries. In this video, you will see a DIY wristwatch service at home. This Soviet wristwatch has a Roman dial which is in very good condition. The Slava with movement 2414 is a basic version watch with a date and 18000 b/h.
🔴 New here? Liked the content? Subscribe: / @tickingwatch
🔴 Disassembly Soviet Union SLAVA 2414 movement (Cлава): • Soviet Union “Glory” S...
🔴 Other watch movements assembly (in EN and PL): • Soviet vintage wristwa...
🔶 Slava to buy on eBay: ebay.us/WYHqYx
Watchmaker tools - bought there:
🔶 Watchmaker tools AliExpress: s.click.aliexp...
🔶 Watchmaker tools eBay: ebay.us/Els9OY
🔶 Olis: ebay.us/9F660n
💚 ticking WATCH website (in Polish): www.tickingwatc...
The music in this video is from www.youtube.co...
Liked it? Support my work with a donation: paypal.me/pool...
Please note that some of the links above are affiliate links from which I earn a small commission when you will make a purchase mostly within 24 hours. Use them as a starting point to find the best offer that fits you. It will be a great support to develop the channel! Thanks, because I really appreciate it 😀
#tickingWATCH #Slavawatches #movement2414 - Навчання та стиль
Do not miss first part of Slava 2414 assembly ua-cam.com/video/RJFgrP1UZ44/v-deo.html
😀💚👍
Thank you for such a great video. Really good camera work and explanation. Super...Subscribed...
The pleasure is mine Stuart Dawson!
Thank you very much for covering this movement.
I've been looking for a long time for someone here on UA-cam to create this valuable aid on the servicing of this very unusual movement.
I have one of these with a malfunction in the keyless works, now I feel confident enough to go ahead and dismantle this watch.
I subscribed and liked.. 🧐👍
👍
Hi. Nice videos, I wonder, if i want to start tinkering with watches and movements, are the tools found on aliexpress any good for the job? And also, what oils do you use? Thanks and keep up the good work.
Thanks. On the beginnig they should be OK. Oils: the best is probably Moebius but there are many others, check links in the description bellow 👍
Czeka mnie serwis identycznego mechanizmu, w fajnej złoconej kopercie. Jak rezerwa mocy? Wytrzymuje 45 h czy nie daje rady?
Powodzenia i oczywiście trzyma nawet trochę więcej niż 45 h 😀 zapraszam na fb, można się wtedy podzielić zdjęciami, nazwa grupy też tickingwatch 👍
Hi.. nice... most movement nowadays are Chinese.... can you do more videos of eg. 2813?.. thanks
Thanks, check this videos, ua-cam.com/video/EHYPhiTVkEY/v-deo.html it is DG 3804 but in fact their isn't any differences in its basic construction, it has only additional wheel for GMT. 👍
I have a Slava watch which I believe is from the 1980's with the 2427 movement.
Quite a nice one, here is almost the same it has only additionally automatic work ua-cam.com/video/TC5P4K0C7gM/v-deo.html
Może jakiś damski zegarek albo metron z uchwytem balansowy.
mam jeszcze Poljota w przygotowaniu a potem poszukam jakiś damski 👍
@@tickingWATCH a można wiedzieć jaki mechanizm
@@mariuszhehehe5767 niespodzianka ale nie 2614 😃
And also can u do a video servicing a 2427 automatic movement from slava, i have a watch with that movement and would like to see the steps.
At the moment I don't have this model but the construction is actually the same. Only difference is with the automatic movement and double date which are rather simple built. 😀
Szkoda że nie po polsku
Będzie chwila to dodam napisy 👍
Dobra robota aż miło się podszkolić oglądając ten film .
Dzięki 👍
Hi, I own a similar watch and it is my first Russian mechanical watch. I was wondering if I was winding it properly, after winding it for a couple time it start getting stiff and hard to wind, Do i keep winding it until it fully stop?
It shouldn't be a problem, I wind ale my watches fully. Maybe it is needing service 😀
Ok! I will try to get it serviced as soon as possible. Thanks 👍
Ja narazie nie oglądam czekam na napisy.
Będzie chwila to i napisy dorobię 👍😀
@@tickingWATCH Ok ;)
Dalej nie ma napisów ???
Really lovely watch, very cool that they used two main springs. Thank you for the video, I might try to find one of these!
Thanks, I really appreciate it 😀
I’ll need a few shots of Vodka to get my hands steady !!!!
hahaha an intriguing method
Hello, we welcome. L want to talk to you, please
Hi, you are welcome, write here 😀
Miałem duże trudności w zainstalowaniu tej gwiazdki ka kamieniach balansu. Wściec się można. Z pensetami mocno sie wszystko ślizgało , udało mi się dopiero przy pomocy dwóch wykałaczek .
W tym modelu jet faktycznie trudno, pewnie w fabryce mieli do tego jakiś specjalny przyrząd stąd gratulacje pomysłu 😀
Mnie zawsze przeważały sereisy zegarków ze strachu że coś zepsuje podczas serwisu dlatego wziołem się za zegary woszące
Ryzyko zawsze jest, ale kwestia wprawy sprawia że potem daje radę, ale zapasowe części zawsze się przydają 😀
INTERESTING.
😀 thanks
16:32 now THAT'S cog tolerance 😁 I don't think I've seen a cog that sloppy before.
I have the same
A myslalem ze tylko ja mam taki talent do lamiania tych trojramiennych sprezynek :D
😀 nie tylko, dolicz jeszcze tych co się nie przyznają 😂
Ja obrałem patent na ten wściekły incabloc a mianowicie trzymamy go pęsetą i wprowadzamy dwa ramionka pod kątem jednocześnie tak jak on wychodzi a trzecie ramionko musi być tuż nad wpustem , dociskamy lekko i przesuwamy najlepiej wykałaczką trochę zaostrzoną i nie powinno być kłopotu czasem ciężko to idzie ale najdzie na miejsce co nie zmienia faktu że ta sprężynka nie spełnia swojej roli poza tym że trzyma nam łożysko jest po prostu za krótka żeby się poddać przy upadku.👍
IDK about this movement, I just need the courage to strip one myself. Jest smieszne jak prymytywne ten sprzet jest ale za drobne rzeby sie pieprzyc z tym. I love lots of your videos and thanks for sharing your finesse. Enjoy your hobby and don't be too preoccupied about views, you should explore a "modding" series.
Zapomnialem poradzic rzebys urzywal(?) finger tip cuttings from finely meshed fabrics so you dont mar the dial, wielo nmiej pocujace terz.
Thanks and best regards :)
Hi.nice video!werry helpfull video.keep up the good work!
Hey, thanks!
Working on the same caliber
Thank you very much
You are welcome 😀
The hand is rusty, is it old ?
Probably end of 80s 👍
That's a surprisingly quick date change. I got a gold plated citizen I bought back in 2002 and it's date change over is like 3 hours 😁
Yes like in ETA 2824
Great video :)
Thanks :)
Well done 👍👍👍
Thanks 😀
Great! Thanks tickingwatch :) What is your favourite russian/soviet movement?
Hi, thanks ☺ I think Vostok and Raketa 👍
thank you so much, i have a sekonda with this movement, i can now put it back together
Thanks, I really appreciate it and good luck with the assembly 👍
Hello my friend, please can you tell me how many winds I must do to have a full power reserve? I'm afraid to overwind and damage it. I have a watch with this movement
The manual movement winded takes about 32-33 winds and power reserve is about 48h. If there is something broken do not worry they are rather easy to buy. 😀
@@tickingWATCH thank u, i was afraid when I did 10 haha...
Thank you!
thanks 👍
@@tickingWATCH 😁