Це відео не доступне.
Перепрошуємо.
How To Fix Printing/Wi-Fi Problems for Canon Pixma and Maxify Printers [June 2022]
Вставка
- Опубліковано 5 чер 2022
- At the beginning of June, certain Canon Pixma and Maxify printers suddenly stopped working properly. Some specific problems include boot loops, failing to print, and freezing. Here's what I had to do to fix my Canon printer.
__________________________________________________________________________
Canon Product Advisory Page Link: www.usa.canon....
__________________________________________________________________________
🔵 Want Me to Review Your Product? Email me at JeremyTH.Biz@gmail.com.
🔵 Follow Me on Instagram:
/ jeremythill
🔵 Follow Me on Twitter:
/ jeremythill
||||||||||||||| 96% ||||||||||||||. 38.6K/40K
I have a TS3522. I was good until i got a new router and had to change my wifi password. Now it won't connect at all. It says it doesn't even read my printer now.
Did you figure out the issue? I’m having the same problem the printer doesn’t want to connect to the Wi-Fi.
@@dzana880 No. unfortunately i didn't. I wound up getting a printer cable and hooking up to my tower on my desktop. It works now but not on wifi. But, one thing...after I did that I went into my phone wifi and picked the printer wifi name and I can print from my phone. I'm sorry i don't have any other answer. Maybe try that.
I’m having this same problem now
I have same issue with ts3320
Ditto. New router and modem, now cant connect either.
I hope you can help me, I don't see my printer in the list, I have Canon PIXMA MG5220, I connected it to my Chromebook, but it shows that it needs configuration, just wanted to know how to do this? having trouble to reconfigure the printer! Hope you can help me
Sir, I have canon E 4570 model inkjet printer, which have comes problem, Display shows Support code 5050. Please give solution
Hi I hope someone can help me. I have a canon Pixma printer mg6150 and although somehow I have got it to scan, I have then gone to the Cannon website to d load a printer driver, although they could only give me one from the MG6100 series, so thinking that will probably work, it did unpack and start installing but stopped with a sort of error msg saying my pc couldn't find the printer. Maybe the driver is not right or too old. Even when I try to print using an SD card in the printer's slot, it says rather the file is too big(absolutely not) or it's not recognisable. I'm not sure what to do as I have also tried on two other comps and still no go. If anyone can help, that would be great.
usb b, anyone with a cricut thats the cable used to connect to your pc or whatever
You know what will make life easier? Fuck this WiFi shit and just let us plug it back in to print. This convenience shit means nothing if we have to troubleshoot it this way everytime.
My TS3160 was printing fine from my phone and then all of a sudden it just stopped .
Will this work for the Caon EOS PIXMA TR**** printers? Like for any TR's???
Hello, Jeremy. You explain things so clearly and slowly; but, I have the Canon Pixma TS3122, and it is spitting a terrible error code at me and flashing lights like crazy! I have never had a single problem with it, except for replacing ink cartridges, of course. I have loved it for the whole time I've had it. Suddenly, today, after printing about 10 different documents throughout the day, it STOPPED. And it's flashing an error code "P10." There is no apparent paper jam; I cannot access the ink cartridges because the carrier does not come to where I ca access it (must be stuck in the side); I find nothing else in my "printers and devices" folder indicating there is a connection issue. And I am not at all "technically-inclined." Is it a goner, or can you think of anything for me to try??
My Canon printer 5300 although it can print it says when trying to scan : USB disconnected, Scanner is off. Neither of these things is true. Could it be that a long time ago someone connected the WiFi which still has a blue symbol on the printer which I can not discover where to turn it off?
Thank you. I have trouble with my Canon Mx472.
I am 2 weeks trying to print, and suddenly, it is offline even though my printer is on and connected to my wifi. now I have to buy a new printer, but I have 2 cartridges in stock. Nothing works
Mine saying 5100 problem
Mine just started this mess few months ago glad I found this I have same printer!
I only have my phone tho 😢
I have exactly same issue with my canon ts3322 very recent due to change of network , not sure how to change the network on my printer to be same network..im using the new router network and password with my phone and laptap...can not just print..thank you..
Finally, The USB-B was the key for me. I may not get wifi printing, but that's ok.
Thanks
I got this chord can someone tell me how to get it hooked up to the wire from my phone to the printer what must I do to make it print
Thanks. I'm only a little wary about disconnecting the router. You are very helpful.
It didn't work for me:( I clicked on the link for the MX492 and it keeps saying "Page not found"
What if you were never connected at all I couldn’t get my new one going at all. & I don’t have a pc
Can’t get my TS5320 off 4X6
Man if I could hug you from here I would...it too a bit of doing...but it is working again!!!!
What if your printer keeps turning off after 5 seconds?
I have a iX6800 and it allowed me to connect at first but while it was connecting to the router it said it could not communicate with the printer now it’s not even popping up
Hello Jeremy I have a MX492 printer that’s not printing my photos
HI will you have any ideas on connection with Printer? got Deco x50 , a new canon printer E4570 , using Macair , printer can connect to wifi as per screen, I can at time see appearing on my mac when want to add but not consistent and suspect Deco is a possible issue for poor connection, printer appear on my Deco list of connected items ? Printer seems to be connected to Wifi but cant seem to add my printer on my mac ! thanks in advance :)
is there a firmware update for Pixma 3600
Thank you so much for this video, I downloaded the files from the link you took us to.
Today I got 3 good pages printed after 3 weeks of blank pages, but then after those 3 pages it was blank pages the rest of the day. I have a feeling I do not know enough about this problem.
After downloading and installing the files, there was no difference... blank pages, like the downloaded files had not changed anything.
I will be visiting here for a while just in case someone post a solution.
Thank you so much! You solved my problem!
If anyone trying to fax I've had it from canon itself that in order to use the fax function a phone line must be plugged into the back of the printer
You can't fax from the printer only over WiFi
I've got error code 6004 on my Pixma 🤔
On a Canon tr8622a...avoid this Canon POS!! Same multiple problems and....firmware will NOT install. Going back to Brother!!!!!!!!!!!!!!!!!!!!!!
I got the TS3522, and when there was no b cable I thought this is not good
Thank you I will try.
Dude not to take offense but how do you do it man your voice and videos are amazing
When I do videos I get so nervous about is my voice right is my speech right and I look for the best speech in my head dude you have a gift you have the power and good speech any ways great video man hope you have a amazing sweet day
Thanks for the amazing compliment! I wish I had a good answer for my speech and cadence methods, but it's really just how I talk everyday. Years ago, people told me I should do radio. This is close enough I guess, lol.
I did have a college English professor that told me something I'll never forget and I use their advice regularly. They told me that whenever you write/explain a topic, assume the audience has no idea what you're talking about. That way, you can speak more concisely and with confidence.
I have canon ts3522 that has p10 code also alarm and power buttons blinks on and off
I have no cable for direct connect with my android smartphone
My printer is not on that list thanks anyway
what is your printer model ?
mine is the CANON MAXIFY MB2720
You didn’t put the link in the description like you said you would.
The link is there. I just checked it.
bought a brand new one and won’t turn on … any ideas on what it can be ?
A hot 🔥 mess!!
Good info to have. Thanks
Cannon Sucks
Link doesn’t go to a working page?
I just updated the link. It should work now.
@@JeremyHill I have MG7720 model is there no fix for this printer?