Installing Hyper-V on Windows Server 2012 R2
Вставка
- Опубліковано 7 кві 2016
- This video will look at how to install Hyper-V on Windows Server 2012 R2. Check out / itfreetraining or itfreetraining.com for more of our always free training videos. Hyper-V is a Microsoft virtualization technology. It is included as part of Windows Server 2012 and Windows 8 and above.
Access the rest of the course: ITFreeTraining.com/hyperv
Download the PDF Handout: ITFreeTraining.com/handouts/hy...
Demonstration installing Hyper-V on Windows Server 2012 R2
00:16 The install will be performed on a fresh install of Windows Server 2012 R2 Standard edition. The only configuration that has been performed is to configure an IP Address and add the server to the domain.
00:28 To add the role, open Server Manager from the quick launch bar and under the manage option select “Add Roles and Features” to start the wizard.
00:38 Press next to skip the welcome screen.
00:39 On the screen “select installation type” select the option “Role-based or feature-based installation” and press next. This option is selected since the install will be performed on the local server.
00:55 The next screen will ask for the destination server that the role will be installed on. In this case the default option will be used which is the local server and then the next button will be pressed.
01:08 On the role select screen, select the role “Hyper-V”. The wizard may prompt for additional features to be installed, if this is the case press add features to add these features and then press next to move onto the next screen of the wizard.
01:25 When next is pressed on the role selection screen, some checks will be performed to ensure that the server can run Hyper-V. In this case an error will appear stating that virtualization has not been enabled in the BIOS. See below “Demonstration enabling virtualization in the BIOS” on how to fix this.
03:17 On the select features screen, no additional features are required so press next to move on to the next screen of the wizard.
03:25 At the welcome screen press next to move on. The welcome reminds the administrator that later on in the install a network adapter will need to be chosen to use with Hyper-V. This can be changed later on if required.
03:43 The create virtual switches screen will ask which virtual network that you want to use. In this case the New York virtual network was selected. You are free to change this later on if you need to.
04:20 On the virtual migration screen you need to select if the Hyper-V server will accept live migrations from other machines. This setting can be switched on later if required. A live migration will essentially allow a virtual machine that is running on another Hyper-V server to be transferred to another Hyper-V server. This can be done without shutting down the virtual machine.
04:42 The next screen will ask where the configuration and virtual hard disk files for the virtual machines will be stored. In this case the default location will be used.
04:52 The next screen will allow the administrator to confirm the settings that will be used for the install. If you are happy with the settings, press install to install the role.
05:10 Once the install is complete, the wizard will ask for the server to be restarted. To do this, right click the start menu and select “Restart” under the menu “Shut down or sign out”. The server will perform two restarts before reaching the login screen.
Without Hyper-V
05:28 Without Hyper-V installed, the operating system communicates with the HAL (Hardware Abstraction Layer). This provides the basic functions for the operating system. The operating system does not communicate directly with the hardware and requires the HAL to perform this. The standard HAL that Windows uses does not support virtualization and must be replaced in order for the operating system to run Hyper-V and thus support virtualization.
Hyper-V
05:40 When Hyper-V is installed the HAL is replaced with a Hypervisor. The hypervisor is essentially a HAL with additional functions added to support virtualization.
05:55 The operating system is a partition and is treated like a virtual machine. So each virtual machine that is created is placed in its own partition alongside the operating system. Since the operating system is treated like a virtual machine, resources will be allocated to it and the virtual machines evenly and fairly.
Description too long for UA-cam. Please see the following link for the rest of the description: itfreetraining.com/hyperv#/ins...
See / itfreetraining or itfreetraining.com for our always free training videos. This is only one video from the many free courses available on UA-cam.
References
“Install Hyper-V and Configure a Virtual Machine” technet.microsoft.com/en-us/li...
Thanks a million for the last reboot and showing the visual diagram how the HAL is replaced by the HyperV hypervisor. That's really cleared my doubt how Windows Server is acting as a type-1 hypervisor.
Thanks, glad we could help.
The time and effort put into these video, is simply brilliant. Thanks for creating them, I've learned a lot over the years...
Dude, you are SO thorough! This is one of the reasons I so love the videos from ITFreeTraining. U rock, bro!
+GizmoFromPizmo Thanks so much! We're glad to hear you enjoy our videos. We have a ton more coming up, stay tuned!
You don't even know how much I would give to have normal BIOS like that. The trash tthey install now with UEFI and ability to use mouse is mind boggling.
RIP Award Modular BIOS. You were the best.
Thank a lot for creating such an awesome video. I was able to install Hyper V successfully on my Windows Servers 2012 R2
That's excellent! We're glad our video helped you with Hyper-V. Thanks for watching!
Thank you! You are doing great work! :)
+Lucas Johannes Albrecht You're most welcome. Thanks for the great feedback!
Very informative, Thank you!
You're welcome!
great... just waiting for your next video about virtual in hypv
+khan jan They're coming very soon!
Ótimo vídeo como sempre, muitos detalhes e ficou muito bom, parabéns!
+Tiago Toledo Faria Obrigado! Agradecemos por ser um telespectador fiel!
Excelente era tan sencillo pero te pasaste gracias
Thanks for watching.
To the point video! How did you record the BIOS and booting up screens?
thank you !!!! superb....
You're very welcome!
sir
i installed hyper-v succesfully but "no active network adapters found" error is facing. can you tell me how can i install network driver.
What i don't understand in all these videos, how do you have two network ports? Do you physically have 2 network ports? And are both of them connected to your switch/firewall/router?
On servers there are typically two network cards, yes. This is done for redundancy so that if there is ever a problem with one interface, the server can still communicate with the other.
Very well done. My only question is HOW did you manage to record the BIOS ?
looks like he done it on the vmware or IPMI
Hdmi capture card ??? 0.o
After installing hyper-v on my 2012 server, some of the options are still greyed out under 'hyper-v' on left menu.why is this? and why can I NOT expand my drive??
It sounds like it may be permissions problem. May sure the account you are using has enough permissions to perform those functions.