Charger connector replacement LG G4 jumper
Вставка
- Опубліковано 18 чер 2017
- Charging Port Repair LG G4.
LG G4 charging port replacement.
How to replace the fixed charging port.
LG G4 not charging.
Replace your LG G4 charging.
Cell phone charging port replacement.
Phone charging port repair/replacement.
Microsoldering usb charge port replacement.
Mobile charging port repair.
LG G4 charging port replacement how to change, - Наука та технологія
*✅ Tools HERE* 👉👉 https:movilone.eu
Wow, the screws around the edges just magical diapered.
Hey MovilOne, thanks for the video! If my USB port hypothetically broke connection at the solder joints, what's the likelihood it pulled up the pads/traces like in this video, instead of just broken solder joints? I'm not sure, it may be inside of the port itself and have nothing to do with solder joints. But, I'm assuming you've repaired quite a few of these and for preparedness sake I'm curious how likely it is I'd be opening a can of worms repairing my phone, not having the proper equipment or materials for a jumper repair currently, and not wanting to leave it torn down due to that. I'd greatly appreciate your opinion. Also fabulous video, especially with how small scale everything you were repairing and still getting on camera is!
Hello, i was wondering if i just solder those 4 charger pins do the work? or what was the bigger brown thingy you soldered, do i need to do that aswell? seems a little harder for me im a beginner
really neat video. thanks for sharing!
Thank you, Pionner for your comment! Best regards
thanks a lot for the vidéo :-) is it for the h815 ?
nice video!👍
Thanks much 😀
Hello, Jolujo 58!Thank you for your comment! Best regards
www.movilone.es
What is the paste is it flux? If so what type. Also what is the copper piece you use to remove the solder from the board?
good work, similar style to eselekt workshop
Thank you, Alex! Have a nice day
www.movilone.es
May I ask you what temperature you have set for the hot air?
are you doing this in the UK? My phone is very hard to charge now as the micro USB connection has become poor, I have to move the cable about to get a connection, eventually it might charge but its a pain. Can you fix mine?
Hello! We are from Spain, sorry can t help you but i m sure that you can find a good shop to repair your mobile, near to your location!Have a nice day!
www.movilone.es
Paul Bentley hello i had the same problem as you but it seems to be resolved i purchased this cable on amazon
www.amazon.fr/gp/aw/d/B01GJC4WRO/ref=yo_ii_img?ie=UTF8&psc=1
Try it it's a cheap solution ;) if you do let me konw if it's work for you too
So is the jumper there because there's a bad connection through the tracks in the PCB?
Yes, because the tracks were broken. Have a nice day!
how to know if there's one broken track?
The traces/solder pads lay on top of the PCB, and if one is lifted, it'll just be a spot that's slightly off tone of the board's color, instead of shiny silver like the other traces and solder pads. Not always, but generally speaking you have to lift the pad/trace to break it, and if it hasn't been lifted you'll likely see a burn mark somewhere along the trace where the connection has been broken.
What happen u don't talk or we have to understand sign language like we have to guess what u doing.
He just ripped two of the solder pads on the board off crappy soldering you should wait until all the solder melts and maybe turn your hot air gun down.
Hello, Who real, but me :) If you pay attention, it is specified that this phone comes from another technical service, and is touched.I have never broken the pads of the devices that I repaired. Best regards
www.movilone.es