That is wild. I’m a glassblower, when glass is thicker, it allows you more stretch for the same reasons. Vinyl and glass have a lot in common. Heat manipulate freeze repeat
Man I wish I had the money to hire him to wrap my motorcycle! I'm sure he is expensive but he is hands down the best! I have looked online to learn how for 2 months and nobody can come close to his skills. We call that the GOAT!!
They didn't remove it because people are more worried about being overpaid for sub par and low quality workmanship, sign of the times. Thank you for so many videos and sharing your experience and Master level skills, nobody else does, they do these ten minute time lapse stuff and show no mistakes or how to.
I am wrapping my truck in this very product right now. For the most part it is super easy to work with. But shrinking is not nearly as aggressive so some stuff is harder. I really struggled with my back corners of my bed on the bottom with bunching. I have been doing it wet so far. And wet is just so easy to work the flat sections. I got bunching on my rear light and needed to do a cut to overlap. I am going to seal the edges of some areas with the 3m sealer stuff. The bottom edge of the bed and the back area as it wraps to the bed seem like good spots to seal.
I'm wrapping a miata hood with Vvivid carbon fiber and I can't get it to stretch enough to properly glass it out so I'm left with an extra inch of material at the end that I can't get rid of the crease, if that makes sense
When you are cleaning the panel with compressed air are you using something like a Stat Gun? Are shop was across from a gravel pit and to avoid debris form wanting to stick these came in handy because we found that a regular nozzle or gun wouldn't always do the trick.
So is this film that much easier to work with or do you just make it look easy? I wrapped my car in Vivid Matte mustard yellow and that stuff was thick.
Hey man im in canada also this stuff is killer and plan on grabbing some for my truck but what about ceramic coating the ppf after what do you suggest?? Much appriciated keep up the good work man learned everything i know from you!!!
If you don't mind answering a question about tack, on a scale of 1 to 10. 1 being cheap eBay wrap, to me like duct tape, hard to use. 10 being the least amount of tack, easiest to use. Where would you place this PPF? I really like Teckwrap but I'd put it at about a 4, original Vivid at a 6, Avery a 3, Cheetah at a 2. I know you probably have a preference because you're really talented. Asking as a soso wrapper.
Dude makes wrapping look so easy when its not.
He's the G.O.A.T
i was thinking the same thing, just tried wrapping part of my motorcycle and it was 10 times harder than it looks. CK makes it look way to easy.
If you practice enough at anything. It becomes easy.
I'm impressed with this wrap. Certainly will consider trying this once they get better stock in the USA.
Christian aka the wrap magician 👌 always found watching your videos so satisfying and inspiring
this looks amazing! i’m also interested in the cosmic blue
That is wild. I’m a glassblower, when glass is thicker, it allows you more stretch for the same reasons. Vinyl and glass have a lot in common. Heat manipulate freeze repeat
Man I wish I had the money to hire him to wrap my motorcycle! I'm sure he is expensive but he is hands down the best! I have looked online to learn how for 2 months and nobody can come close to his skills. We call that the GOAT!!
I concur. I was able to wrap my vette's top and halo using these videos. Much appreciated
They didn't remove it because people are more worried about being overpaid for sub par and low quality workmanship, sign of the times. Thank you for so many videos and sharing your experience and Master level skills, nobody else does, they do these ten minute time lapse stuff and show no mistakes or how to.
I wonder if heating the blade will make it cut better
I am wrapping my truck in this very product right now. For the most part it is super easy to work with. But shrinking is not nearly as aggressive so some stuff is harder. I really struggled with my back corners of my bed on the bottom with bunching. I have been doing it wet so far. And wet is just so easy to work the flat sections. I got bunching on my rear light and needed to do a cut to overlap. I am going to seal the edges of some areas with the 3m sealer stuff. The bottom edge of the bed and the back area as it wraps to the bed seem like good spots to seal.
That's a lovely colour. Great job, Christian.
I'm gonna try to do my tailgate in carbon fibre . Just have to do little work on it.
Does PPF only come in solid colors
Solid colors as in no graphics? No. There is printable PPF.
Thank you sir
Great teacher!
The patience to be good at this is amazing, I would rather stick my junk in a box of razor blades. Not for me, these guys are worth every penny!
Beautiful work.
Whats the lifespan in this wrap?
Can you wrap over bed liner?
I'm wrapping a miata hood with Vvivid carbon fiber and I can't get it to stretch enough to properly glass it out so I'm left with an extra inch of material at the end that I can't get rid of the crease, if that makes sense
Great job, thanks
When you are cleaning the panel with compressed air are you using something like a Stat Gun? Are shop was across from a gravel pit and to avoid debris form wanting to stick these came in handy because we found that a regular nozzle or gun wouldn't always do the trick.
Can I use Avery supercast? Is it long or short term? Any info is appreciated
So is this film that much easier to work with or do you just make it look easy? I wrapped my car in Vivid Matte mustard yellow and that stuff was thick.
Hey man im in canada also this stuff is killer and plan on grabbing some for my truck but what about ceramic coating the ppf after what do you suggest?? Much appriciated keep up the good work man learned everything i know from you!!!
Will there be more colured ppf?
What brand are you using?
In one of the videos you mentioned that you do not know yet if this vinyl was directional, have you figured that out yet?
Good
Next video with dry ppf, take a scrap piece and show us how hard it is the poke through the dry ppf plz
This vinyl looks way more user friendly then flexi shield?
If you don't mind answering a question about tack, on a scale of 1 to 10. 1 being cheap eBay wrap, to me like duct tape, hard to use.
10 being the least amount of tack, easiest to use. Where would you place this PPF?
I really like Teckwrap but I'd put it at about a 4, original Vivid at a 6, Avery a 3, Cheetah at a 2. I know you probably have a preference because you're really talented. Asking as a soso wrapper.
Masterclass in wrapping.
Bruh. Make it look simpler. Not me wanting to throw my entire car in the trash when I’m trying to wrap tiny little pieces of it.
It's a jeep thats above standard.