No Crank? Jumping the starter trigger wire could get you moving again!
Вставка
- Опубліковано 6 вер 2024
- The relay losing its ground was the ultimate cause of the no start. Acura 3.2CL-S 6 speed , No Crank No Start
a little jumper wire got us moving again !!
#keepwrenching #wesselmotorworks #wrenchingwithkenny
FYI, you were right to begin with, this is a 2003, not a 2002 as you mentioned at the end. The 6MT was an option only for the 2003 model year. Great vid.
I would have thought that the amps running thru your small wire would have acted like a toaster :) . Thank you for the video(s).
The trigger wire isn't really a high load circuit. Many times the trigger side only has a 10-20a use. The main wire is a different story lol
Thanks for including the problem in the description - this video is well done great content
Stay tune! For procedure to find problem! Good video!
Would be interested to know what you find. Clutch or brake switch or this relay you mentioned being the problem and where it might be hidden if it is a relay.
So what was the problem/fix for the problem?
hey kenny I like the wood stick in the front reminds me of my car now every now and than i have to smack the starter so i have the stick and long hf screwdriver sitting on the floor on the passenger side
I like this guy. I want this channel to go up!. Record the issue just like you did here. Then record the solution. 😉
Thanks for the informative videos!
Yeah at least the old school jumper screwdriver or Tire until it started over
do you happen to remember what the fix was to this problem?? was the signal wire frayed in a certain spot? did a relay go bad? the pgfmi? any info at all would be a great help
What was the problem after all??
Sweet
Did you have the key turn on in the ignition switch?
I’m having the same issue with my car and can’t figure out why. What was the issue???
Hello Partner, just found your channel and have only watched this video so far, may I ask for a response on what percentage of your 400 videos have Oscilloscope patterns, Scan tool live data, Schematics, step-by-step diagnosis, or references to a Service Manual or online pay systems such as Mitchell or Alldata, to aid in Diagnosis along with DTC Definitions, thanks in advance for your kind response. I do understand that you may be geared towards DIYers primarily and maybe you don't use the items I have listed, much appreciated.
I dont have any videos that show any of that , yet. I am geared more toward the DIYers at this point, however, in the future I may start to go into some of that. Thank you for watching !!
worn ignition's that aren't making contact, if a car is like 30 years old