Horizontal cases make a lot of sense these days. With enormous video cards a horizontal case would mean no sag. Monitors are way lighter now so they could sit on top of the case just fine.
@@Elatenl A horizontal case with a monitor on it takes up less space than a vertical case and that same monitor. Moreover, even if the cases aren't as durable(depends on the case), the monitors are also much lighter, so at the very least it evens out.
I have a system set up like that using the Cooler Master HAF XB EVO case. 27" monitor sitting just fine right on top. This should make a comeback. I'd love to see a horizontal case with a built in monitor arm if done right. My main is the newer style that quite frankly with modern gpu's being 3-4 slots and prone to sag (I have to use an anti sag bracket and still worry) is rapidly loosing viability for higher end systems, especially when you add in air cooler that have to supported to hang out sideways stressing the motherboard and pulling against good contact.
@@Elatenl My Cooler Master horizontal case is quite solid and neither the gpu nor the cpu heatsink are adding sideways stress to the motherboard and my 27" monitor that weighs less than 1/6th what my last (15") crt did has zero effect on the mesh top.
One issue though. I've rack mounted my server and gaming pc, so they're both horizontal. And they're both in 4u cases, and even in a 4u server case, i had to cherry-pick a 4080 that would actually fit and then still i had to get 90 degree power plugs because the regular ones take too much height. Worked out in the end, but a tower is wider and doesn't have that issue.
My first job was data entry in 1984 after the company got their first computer. It was a Tandy TRS-80 Model II. They replaced it a year later when the first IBM PC came out. I moved the horizontal case to the side of my desk vertically to make room on my desk. They freaked out and called an early IT company to make sure it was okay to lay it on its side.
Towers were traditionally introduce to offer more expansion bays, tape drive, floppy drive, cd,expansion cards at rear like video toaster, etc. it’s odd we still use this format when very few computers have bays anymore let alone an optical drive. What’s equally interesting is that most servers are in a 1U or 2U form factor to go into racks, so they are horizontal vs vertical.
Exhaust fans on a 1U or 2U are so small they have to whine loudly to do their work. Home users won't allow that. So minimum height of a desktop pc is the size of a quiet fan.
But those racks are vertically oriented. And for much the same reason that desktop cases, horizontal real estate is generally more valuable than vertical. A vertical tower is a more efficient use of your desk space and a vertical server rack is a more efficient use of the server room / data centre.
@@dave24-73 If we could make perfectly silent fans, then we could make perfectly frictionless engines. Or a guitar string that makes zero sound waves when it vibrates. The physics of it is just not possible. Best we can do is change the character of the fan's noise, muffle the sound that it creates, or shut the thing into a server room where it doesn't matter how loud it is.
Ever since those idiotic case designers moved the PSU from the top to the bottom, they became Desktops again - at least for civilized people who have carpets, because they can clog and destroy a PSU.
mines tipped but the motherboard is hanging upside down, on a wire rack that also holds my other AV equipment, side panel off so most dust settles to the floor.
You know what else changed? Computer desks got taller. Once towers became popular, desk designers realized they could raise the main shelf to a height closer to where a monitor ought to ideally sit, instead of optimal wrist height, and add a sliding undershelf for the keyboard and mouse. If you tried stacking your monitor on top of a whole 5-inch PC nowadays, it would be too high.
I see it other way around - monitors got much bigger. It's fine if 15" CRT sits 20 cm off the desk, and it's roughly at the proper height, ergonomically. I have 38" LCD now even with VESA holder I don't have space under it for anything. I could slide in my phone under monitor, perhaps.
Desk height didn't really change unless you count standing desks. The thing that changed was monitor size as you could have bigger monitors along with monitor stands getting taller to keep them at optimal eye level. Also, it wouldn't really be too tall if you had a shorter monitor stand.
In case you're actually wondering, it's completely automated, CPUs nowadays constantly fine-tune their speed by complex alrorythms based on load, cooling capabilities, die quality and other parameters.
@@yeruschmift8422 More accurately, the reason for the "turbo" button was actually to slow the computer down for compatibility with old games (i.e., games designed specifically for the IBM PC and PC XT) So the REAL reason we don't have it anymore is that, some time in the mid-80s, we stopped writing code under the assumption that it would always and forever be run on a 4.77MHz Intel 8088.
@@partysodown You don't use NUCs yet? Many Offices I know only have the NUC attached to one of the VESA holders of the screens, because most offices don't need more computer power
I think of "pizzabox" as a desktop with all drives aligned horizontally in a single row, specifically the Power Mac 6100 and its Performa equivalents. Its height allowed for only one horizontally mounted expansion card, compared to the 7100 with two rows of drives and three vertical expansion card slots. The 6100 never got a successor in the same form factor when Apple switched from NuBus to PCI.
@@jsncrsoits not "plenty", its like a small handful of cases have drive bays and theyre almost always hidden behind a door or flap. i need three external bays minimum and im trapped buying either gigantic cases meant to go on the floor as theyre almost as tall as a desk is, or budget cases from a decade ago that still have stock sitting around in store warehouses.
Used cooler master stuff from like 5 years ago still have them and surprisingly robust front IO options. I got a HAF 932 (I think that's the number) that was perfect for my first build last summer. Honestly the only thing that shows the age of the case is my front IO has firewire
There's a missing dimension in there, though: old horizontal cases aren't nearly as *deep* as current full-sized towers. Most desk setups these days have the monitor pressed up against the back wall, with the rest of the desk's depth devoted to keyboard and mouse space. Dropping a 244-305mm ATX mobo into that space pushes the keyboard forward. Of course, an ITX build would fit better, but the whole point of SFF cases is that they can fit just about anywhere
And not only that, but Coolers and GPUs have also gotten wider. If i put my tower on its side it's quite a lot higher than most of those old horizontal pcs because of that.
@@reappermen And one more thing: At the time of the Desk Desktop PCs, you normally didn't needed to access your connectors. So the backplate was really a backplate. All your Hardware was always connected to the computer, be it the mouse, keyboard, printer etc. You only had your drives at the front. But when USB came along, it became annoying to always have to go to the back of your computer. So a Tower was also good there, as in the beginning you could plug in an USB card into your PCI slot and there was a cable attached so that you could put one USB connector also at the front of your tower - and later they started implementing front panel USBs and audio connectors directly into the cases. In the 1980s at the front you only had your disk drives and the power button.
@@acmenipponair well, to be fair that is not much of an issue, there is no reason why the couldn't fit a connector panel to he front, sides or top of a horizontal pc
@@reappermen I could see a blow-through case working, one built around two banks of twin 140mm fans. That sets the height and depth of the case at 140 by 280ish mm. Make it MATX/ITX to trim the width down to a manageable... 300, 325mm. The GPU would need a riser for a 'vertical' mount; some vent holes in the top cover would let it breathe, and an AIO would solve the CPU cooler height problem. Not sure where the PSU would go.
Excellent point, back in the days fans was the PSU fan and later an small cpu fan. Also as pointed out the screens is much larger so you can not have something thick under it anyway.
I'm old enough to remember that the original name for these cases were "Desktops". There were "Towers" and "Desktops". Why does this video not mention this at least once?
I guess it might sound confusing to some of the audience, who were not even born back then... Actually I think many people working at LTT-MG are too young for that.
My brain: 🧠 “Why is he explaining floppy disks?” 🧐 “1984 was only… 40 years ago!” 😱 “We are truly living in the future!” 🤩 “ …when did that happen?” 🤨 “Hope we’re in a Sci-Fi Utopia timeline…” 😇 “…not a Sci-Fi Dystopia one.” 😅 “Thank you for listening to my Ted Talk.” 😘
When I worked at Dow Chemical, in the Process Modeling and Advance Control group, I got a Quadra 700 to be shared by the team. Most of us had 286 PCs as our personal machines. My boss had me hire a vendor to make a bespoke rolling desk for the machine.
Home theater PCs are designed to fit on a shelf and be stackable with DVD/VCR players, amplifiers, or other stereo pieces (which almost always come in horizontal cases).
The problem is with GPUs getting bigger & heavier a horizontal case would cure that problem. For me I have a horizontal case (a SilverStone GD08 Grandia) for my main rig I actually prefer it now. No light, no bling, just pure performance without the unwanted power draw. I have a turntable sitting on top of it to (a Audio Technica LP3) for those times when I want to go analog.
I have the same case and love it. I also really appreciate that Silverstone sells port kits to retrofit their older cases with a front-facing USB 3.1 Gen 2 Type C port for cheap, and that the case is optionally rackmountable.
Me sitting here with a Silver stone horizontal PC case and its a gaming PC. Vertical cases were popular because of the expand ability. When they started their rise you had 2 differnt graphics cards, one for 2d and one for 3d, you had a sound card, you had a midi card. A card for your printer, a card for the modem. A card for controllers, a CD drive, a 5.25 floppy drive, a diskette drive, DVD drive, CD burner etc etc. Horizontal cases were limited on space. These days horizontal cases make a lot of sense because you don't have a lot of expansion use anymore like we had in the 80s and 90s. They also eliminate the GPU sag issues. The main hampering issue is the RGB vomit crowd.
@Wolfstanus True. Instead of expansion bays, I actually enjoy using plug-and-play with the USB-C ports or Thunderbolt ports. In the future, I would like to see wireless drives that use Bluetooth or Wi-Fi or some other wireless protocol ... to reduce wire/cord organization. A few years ago, I did buy an external Western Digital wi-fi drive. The wi-fi connectivity was not 100% perfect ... probably due to compatibility/driver issues ... but I would say it's a step in the right direction. ... but I know that hard-connecting to the PCIe bus is more preferrable, for speed.
@@zeryphex The issue for me with wifi/blutooth is that its unreliable to unusable in my environment. Theres too much interference. Even wireless controllers are questionable and wireless speakers don't work half the time. I just prefer to have my drives connected and inside my PC so It doesn't get lost, I don't have to look for it. I don't need a power brick, another surge protector etc. But in the future they don't want you owning anything so drives of all kinds are going to go away. We are already heading in that direction
On the other hand... the way I remember the times when towers did become more popular it was allready around mid 90's... Common PC had usually one graphics card, a modem and maybe a soundcard. But even soundcards disappeared quite quickly as the integrated sound chips were replacing then fast. And back in the desktop case era, motherboard didn't often support even P-ATA's, but required an adaptor for drives too. And as far as RGB goes... I don't think case orientation means much no matter which way you are leaning for... Different, maybe. But there are options. As for the reasons why the desktop case is not really gaining much popularity. I think the number one issue is in displays. Back when monitors were 15" at max, it was actually good to have it slightly higher. But as displays got bigger, to get to ideal height, you would really squeeze your setup thin... And that would leave very few options for cooling and set other limitations as well.
@@JuhoJohansson-bz3jb OK , Video card, sound card (sound chips were extremely hit of miss even in the 2ks and not one could do dolby surround.) modem/Ethernet card and other peripherals like scanners, fax, printer were still common in the 2ks. Meaning you had to have a tower to fit all that in. Oh and then you had SLI in 98 through the early 2010's so lets slap in up to 4 additional video cards. Then lets not mention USB still needing its own card if you wanted more then 2 in most PC cases at the time. Oh and media duplication was common so most people ended up having 2 burners because it was faster to burn a cd that way and didn't require taking up space on your hard drive. Oh lets not forget the TV capture cards that had gotten pretty popular in the 2k's because of machinima and "montages." Especially with the halo crowd. Oh and floppy drives were also common on just about every PC in the 2ks. A tower just offered more for the average consumer. Not everybody had all that stuff but the expand ability was a huge driving force. As for the RGB thing. Computer cases now are made to be on the desk and be a centerpiece. It was half facetious comment about the aesthetics crowd that chases pretty lights over functionality. Sure there are options. I have one sitting right in front of me on on a blank of wood on the floor . But there's a reason they aren't common. They are small and they aren't "Aesthetic" for the PC enthusiast and those people spend more money on a PC and are the driving force for trends. And one of the biggest reasons your computer case is big today is, your graphics card
@@Wolfstanusas far as printers go, the ones we had at the time all used LPT-port wich was usually supported directly by the MB, even back when IDE was not, and cases were equipped with the LPT long after most had allready gone to USB... But in my own personal experience vast majority of computers were fast losing expansion cards rather that stacking them up. Eventually leading up to the point where some of the office computers didn't have any of the slots filled. And some so called "gaming" PC's had just one for graphics. And I personally had at one point a graphics card capable of video capture. But this is just my experience from the mid 90's to early 2000's. Spanning machine generations from 286 to Pentium 4. I do understand that other people have different experiences, but this is what I experienced at the time. Sure I did read about rather crazy setups, but didn't know anyone who could put that much money into a computer to actually do some stuff they wrote in the magazines at the time. And as far as I know things like four way SLI didn't turn out to be much of a success... SLI in general was not selling very much and because of that gained little software support, wich made it simply too expensive for the little actual benefit and eventually they just gave up on that idea...
No mention of business SFF PCs such as Dell Optiplex SFF and HP Prodesk SFF computers. Used widely in businesses and schools in which the CRT stand stands on. And weird number crunching farms.
Had 2 5150XTs in the 90s, that switch always stuck with me. It’s too bad that no one will bring that back unless one were to find a donor then graft it onto a new case.
And the hard disc's at the time used stepper motors for head alignment. Over time wear patterns would form. This was not normally an issue until the user changed the cases orientation from horizontal to vertical and vice versa. When a customer would call us because they are suddenly getting CRC errors we'd ask if the computer had changed orientation. Sure enough putting it back fixed the problem.
Hard disks have not used stepper motors for head movement since the early 1990's at the very latest. Noting that the IBM PS/2 at launch came in desktop aka the Model 30 and 50, and tower aka the Model 60 and 80.
@@jonathanbuzzard1376 It's been a while. Maybe it was a worm gear? Whatever the case changing the cases orientation usually fixed the issue. When did disk platters start being used for the servo tracks?
My Silverstone Grandia GD08 HTPC case has two. The latest iteration even has front-facing USB 3.1 Gen 2 type C ports, and you can buy the port kit separately to retrofit older cases. It's even rackmountable with optional hardware.
Why doesn't anybody build a tower with a VESA mount in the middle of one side for a monitor, and all the front panel ports and power and headphones on a foot that protrudes forward under the monitor from the the bottom edge of the case on the same side as the VESA mount? Uses dead space behind the monitor, simplifies cabling, gets rid of the need for a monitor or desktop hub, clears up the space of the current tower. Because now that I've thought of this, I want this case but it doesn't exist.
There are small form factor cases that attach directly to VESA mounts behind your monitor of choice. It's not suitable for high-end hardware and it's not *_quite_* what you're describing, but with a decent AMD APU and a USB DAC breakout box you're 90% of the way there and can game if you want.
@@bradhaines3142 You just said what he said. Why don't they design cases with vesa mounts? Thin metal sheets can be reinforced, just look at the size of vesa wall mounts, not very bulky.
They are rare and expensive, and also scummy. I have a Jonsbo G3 and hate it with my whole existence. I bought it for the huge analog volume wheel and LCD display and both are scams. The LCD can only show the Jonsbo logo and the volume control, well calling it unreliable is an understatement, every time I touch it it randomly changes the volume, it canot even gurantee that turning it right will make the volume go up.
Don’t let the Quadra 700 steal the spotlight from the Mac II! The 700 case design was based off the IIci/cx which had footpads that could be moved so the case could be horizontal or vertical.
With sit-stand desks, a horizontal case would actually make a lot of sense again. Even with a monitor arm, you could tuck it under the monitor without needing to worry about it tiping over or routing all the cables up a changing distance.
Hey, I miss these types of cases just as much as you. A horizontal type case saved you so much space on your desk or floor and added extra breathing room for all your internal hardware. IMO, I think computer heads just didn't find these types of cases appealing anymore and they just went out of style. Horizontal PC cases NEED to make a comeback! I want to set my computer on the table instead of on the floor because I keep involuntarily kicking my PC tower and as a result my case is banged up and the front USB ports got ruined. It's time to make horizontal computer cases cool again. Who's with me?
@@OctavioGaitan Horizontal cases saved space when your monitor was a similar shape and size to the case. With very wide and thin monitors they would waste a ton of space.
@@88porpoise Wasting space? The monitor is wider than the case! Just measured mine: 510mm wide, vs 440mm wide for the horizontal cases I do have. The reason I'm not using them for this machine is a lack of drive bays. They get designed for HTPC usage, and thus only have a couple of bays, because that use-case assumes you're going to be getting most content off a network. The few 5.25" bays they do have are usually behind slots for an optical drive tray to poke through, so they're not usable for anything else you might want to put in one, like a hard drive rack.
Practical, but may look goofy with the front panel controls designed for a vertical tower. My IT guy where I work keeps one of the PCs like that with the side panel off exposing all the guts.
Mechanical disk drives might not like the sideways mount, and you'll almost certainly need a solution to prevent scratching the desk and/or case. Besides that, should work fine.@moritz3930
The horizontal case configuration was really popular in office and school settings back in the day. I remember the computers I used in my school library in the early 2000s were set up that way. It was also the ideal setup for angry office workers who would take their rage out on the CRT monitor thinking that was the actual computer itself 😂
Plenty of workstations still come in a case that's designed to operate horizontally as well as vertically esp. for Point of Sale systems for cashiers and for functions on factory floors.
Real ones remember the coolermaster HAF XB, it had loads of space which made it super easy to build and was horizontal, it also had loads of room (I think like 300+mm) for GPUs
Some horizontal model desktop microcomputers became my second wish after the IBM Displaywriter, along with the printer. I just acquired a "new" skill in word processing. I fell in love with it way above keypunch keyboarding on the key-to-disk data terminal. Today, I have a Dell OptiPlex all-in-one microcomputer, a Canon color laser printer, and a Brother P-touch label printer. They all add pizzazz to my file production and keyboarding to do various jobs easy as never before.
Yesterday I was looking for horizontal cases, found none in my country. Best suggestions were to find a suitable tower and lay it. Actually not a bad idea.
@@kaseyboles30 Typically, you can obtain the specs via searching google for "RM + Model number + specs" and specs sheet comes right up, and drivers are locked behide a wall that only schools 'n' collages can access. These machines are made in the United kingdom - England, under 'RM PLC'. The 2010's RM computers typically have Intel core 2 Duo with 2 x 1024MB DDR2 755Mhz, sata disc drive and sata hard drive 250GB capacity. Schools 'n' collages lease these RM computers out and during "End Of Life" are replaced then old ones sent back to RM for waste disposal. Gotta be lucky specimen to end up on ebay 'n' saved from having internals scrapped out for precious metals. RM plc stopped making their own branded machines in 2014 and began selling Dell,Acer,Lenovo,HP.Packard Bell, office PC's.
I had my new gaming rig built by a builder company in Utah, a few years ago. I specifically wanted a horizontal PC case so that the graphics card could rest with gravity instead of being suspended in a vertical tower. (I know that some companies provide support sticks or support grips for graphics cards in vertical cases.) The builder company had other cases advertised on their website, but they obliged on my custom request. I just had to prove that I had a valid bank account, and I sent them a screenshot of my local bank branch manager's business card. They bought the horizontal case I wanted, and they built my PC, and they shipped it. All the empty spaces inside the case were filled with very firm foam packs ... which helped with keeping wiggling to a minimum.
I truly believe there is a subconscious hive mind of thinking or communication that happens amongst all humans. Not just in person or crowds but the world over. Many things have been invented at similar times in history across the world.
I've built this year a smaller PC in Chieftec Pro Cube case. It's rather a cube, but it has motherboard in horizontal position. This is probably my favorite case I've ever used to build a PC and my first PC in the early 90's had a horizontal case. Though my main PC uses standard tower, but it is much wider than my previous builds. The best part is to have a lot of space to fit all the cables behind MB.
Have 2 HTPC cases (Linux game PC and NAS) + audio receiver with a OLED TV on top, it just offers better heat dissipation with components mounted this way and you can put stuff on top, you guys should try it lol.
You can, but the now-bottom gets scuffed due to lack of feet, and the old feet are now visible & look weird. And either you don't get tempered glass, or I'd be worried about the glass breaking from long-term fatigue from the monitor's base.
@@crash.override I have my monitors on a dual arm that hangs above it. Although I now remembered, this is not recommended if you have Hard drives. On my case you can remove the feet, thought every modern case had this function
@@crash.override But a mat fixes that (which is what I use), and bc the mat is smooth on the bottom, it makes it really easy to swivel the entire case to get access to the rear ports for when I need them.
Yup. Me too. But also it makes the front panel (actually top-panel) USB ports and power switch closer to me and a casual reach to my left, when i sit at my desk.
2:25 This is not so hard to believe if we know that the design of the PS2 case was bought back from Atari. It was originally designed for the non-released Falcon Microbox computer in the early 90s.
I use a "Cooler Master HAF EVO ATX Desktop Case" because it's very easy to keep components cool in it and it offers a lot of space. I like my choice and it serves me well.
I recently purchased a batch of 20 'old stock' horizontal PC cases from the Aopen brand. Fantastic cases with very reliable (300 watt) PSUs. I have a customer who wanted some small PCs with a Blu-ray drive in them, cases that can accommodate these are almost extinct.
Cool, that's awesome! Just an important note - I'm not sure if you're saying those cases are old but if they are, definitely don't use the power supply included with it, old power supplies will be very unsafe. Especially if they were manufactured during the GREAT CAPACITOR PLAGUE (2000s) Also 300w is not much for a modern system.
@@charliesretrocomputing The cases are from 2009 and I have unscrewed each PSU and they look fine and they also work fine. The PCs use 120 watts of power (measured from the wall socket), so 300 watts are more than sufficient. Aopen were one of the only cases that had reliable and 'free' PSUs at that time.
@@JordanJ01 I still have 10 of these cases in case a power supply breaks. Luckily I could buy them cheaply. I also made it clear to the customer that I cannot guarantee anything if something goes wrong with the PSUs. He insisted on buying the PCs as is because it was cheaper. I also offered to install a Pico PSU, but he thought that was too expensive.
@@Mother_Mercurythe issue is the capacitors in them will be old and unsafe. sure theyll work but its like popping in a AA battery from a decade ago and just leaving it in your device because "it still holds a charge".
Tempered glass is one of two reasons I built my brand new Ryzen in my brother's old Antec P183 (released about 15 years ago) this January. (The other is "must have room for two optical drives AND silicone mounts for my bulk drives"... I'm a data hoarder.)
Enthusiast PCs are almost always towers. But vendors still sell office PCs in both tower and horizontal configurations. HP Pro and Elite SFF PCs, for example, are available in a horizontal configuration. My mom has one of these that's a few years old. One of my favorite computers, the Tandy 2000, was also the first business PC-like machine to be available in a "tower" configuration. It was a horizontal box like the IBM PC, but Radio Shack made available an optional stand on which it could be mounted vertically, letting you set the machine to the side of your desk instead of on top. Great if you had a hard disk (the Tandy 2000HD variant).
I got my custom built computer made specifically for horizontal orientation and it works wonderfully! Its much easier to access the inside when I need to replace or work on parts and easier to put a CD or DVD in the drive. Small Form Factors especially work well for that kind of case and style.
Unless you were around back in the day, you wouldnt know. Many old computers were built like tanks. The entire case was steel and often reinforced with more steel. Only trim pieces were plastic, if there were any at all. You could pick up a computer and drop it - you would be more concerned about the the floor than the computer. Also, many people dont realize many modern vertical cases are actually horizontal as well. The have rubberized feet on the side, which people dont even realize are there.
As an example, the Apple /// computer was known for its ICs working their way out of their sockets, supposedly because the computer ran too hot. (Jobs strikes again!) Apple is rumored to have told users to "pick the computer up off the desk and drop it" to reseat the chips.
I feel like too many people don't remember the small form factor market exists. Also server rack mount cases for PCs. I have one for my NAS. I don't have a rack, though.
Imagine how big the footprint of a horizontal desktop would need to be to fit a 4090... The card itself is an entire FOOT long. It's just not a practical form factor when you take into account the space, airflow, cooling, and power requirements of a fairly powerful desktop. Now if you had some sort of ducting or external cooler, you could drastically shrink the size of the case. But I think the PSU is still going to be your limiting factor. They're still kind of big, even for the compact ones. If you're not using a GPU or are using a small form factor GPU, there are still OEM PC makers (mainly HP, Dell, and Lenovo) that have old-school horizontal PCs, mainly targeted for business/enterprise customers.
@@zandane That's still a lot of real estate taken up on the floor. I think in most cases, horizontal spaces are at a premium, whereas vertical space is plentiful Think about how big cities are built. They run out of horizontal space, so they build upwards. Shelving maximizes the potential of a small horizontal space by going vertical. My game console, PC, and even my work laptop fit on the same desk because they sit vertically. Horizontal cases are just not an efficient use of space, however effective they would be for supporting huge components.
Fun Fact about the Mac Quadra 700: It was almost identical in case design to the (desktop) Mac IIcx and IIci, just with the logo and model written the other orientation. So the "tower" design was basically just aesthetics.
I have a kind of horizontal case, more of a cube form factor, it's a AeroCool Xpredator Cube, it's super easy to work in it and has plenty of space for all kinds of hardware and gadgets. I'm still waiting for a more modern looking take on this design (that is not a ThermalFake), but in the mean time, this one is not going anywhere.
@@ilenastarbreeze4978 Yah, my own internal drive tray wouldn't work too well on its side. I built my latest PC in 2020, but used a tower case with a front drive bay. I wanted an internal drive for my CDs and old CD-ROM games, and the occasional DVD. Though some optical drive trays (especially older ones) have little snap-out tabs to keep the disc from falling out when used sideways. And laptop-style optical drives have that center hub you snap the disc onto, so they'll work in _any_ orientation.
The first PC I had was a horizontal one from the bran Compaq and I had it when I lived with my parents, which was 27 years ago. I often used it for high school papers and the games I played on it were the original Rise of The Triad, ROTT for short, and Terminal Velocity.
I've recently been considering getting a horizontal case again, so this was interesting. It'd be nice to have more options like we used to. To me, the low profile desktop is good for folks who need their monitor up a little higher and would like quick easy access to things like USB ports or DVD drives. I seem to remember some manufacturers even made towers that were desktop-friendly with drive bays that could be mounted in either orientation.
I mean just look at how much more beautiful that pc on the thumbnail of this video is than anything made today. The bezels of the screen, the keyboard... everything.
Just a mention on Apple computers being used for graphic design...back in 1988 when I was considering buying my first computer, I looked through Computer Shopper (that huge magazine/catalog that I'm sure Postal Carriers hated delivering), PC Magazine, and other computer mags at the time to see what I would need for running AutoCAD as I was going into engineering. After thoroughly researching the subject, I found that the Apple II absolutely could not run AutoCAD and the Apple III fizzled out. So, I bought a Northgate 486 in a full tower (note that it was not a SX or DX -- those came later, the SX being that the integrated math co-processor failed in testing and the DX being the one that the math co-processor worked). It had a second socket for a Weitek math co-processor, though I didn't opt for one at the time. It originally came with a 5.25" and 3.5" floppy drives (I eventually replaced the 5.25" FDD with a SCSI CD-ROM drive), a large brick of a 213MB SCSI HDD (it was at least double the height and length of a standard SATA HDD and 5.25" wide), 4MB of RAM, MS-DOS 4.1, Windows 3.0 (upgraded to Windows 3.1, then to 3.11 For Work Groups). I had the computer boot up into PC Tools and from there I could go into DOS or Windows. Ah, the days when we could tweak the *.ini and *.bat files as how we wanted...Windows 95 and its Registry began the downward turn where Microsoft didn't want users to have control of their own computers. I will still use Regedit, though after 30+ years in the IT field, I know what I'm doing with it -- one of those things most people should NOT mess with, no thanks to MS. I was one of the first in my area at the time to have 2,400 bps MODEM (a lot of people confused baud rate with bit rate -- they're not the same; baud measures "changes in state" while bit rate measured the number of data bits, 1s and 0s, sent per second, so a whole string of 1s would not have a change of state until a 0 was sent).
Watching this video on a computer with a horizontal case I built it in in 2018. It slots neatly into the horizontal PC space on a computer desk from 1989, and my wide monitor fits on the shelf above it.
So... I have a horizontal PC case right now... it is my media center / NAS. And it is the Silverstone GD08. The only external mod is that I drilled a hole in the front to mount an ir receiver internal. It is a solid case, and holds a ton... I mean it holds 2x 5.25 drives AND 8x 3.5 drives. Add to that 2.5" adapters and you could have a total of 33x 2.5" drives, and whatever nvme your mobo holds. All in a case about the same size as a cabinet stereo tuner/amp.
Plus when towers first came out, we really needed that ability to stuff extra drives in because they were limited in size. So there could be up to four or five HDDs, plus a CD-ROM drive, plus 5-1/4 and 3-1/2 inch floppies. Horizontal cases just didn't have the drive bays.
Part of that came from the form-factor of the motherboards of the time. Baby AT and ATX motherboards are similar in size, but rotated 90 degrees to each other, with Baby AT being long, and ATX being wide. Cases tended to be laid out so that the motherboard and cards were over one side and the power supply and drives were on the other. If keeping the case as shallow as possible, that meant having expansion card guides up against the front of the case. With ATX being wide and short, everywhere on the front is more-or-less equal for drive placement, so the matter of how many drive bays becomes influenced more by how deep a case the user is willing to buy.
My current rig is in a giant Silverstone HTPC case, it just looks nice. I don't bother with RGB or any of that, it just sits there in the corner and does its thing.
My pc is mounted horizontally under my desk, ports are still accessible and cables run under desk into monitor. Fairly clean setup. Edit: originally I done it because my AMD 5900x was hitting 92c vertically, but when the pc was horizontal temps dropped dramatically. I'm assuming due to the weight of my air cooler.
SFFs usually have pads on two sides so they can easily sit horizontally and vertically. They're better off in horizontal direction since that's how the dvd rom, power button and logo are placed.
The point of towers was offering large numbers of vertically stacked (but horizontally operating) storage media drives while using the least space in your house. Now that optical drives have also all but disappeared the main reason is still overall use of floor and desk space.
Horizontal cases are still being made and sold. A lot of businesses still use them. I have owned several over the years. My newest one is an HP Elitedesk. Before that was an HP/Compaq Elite 8200. I don't do gaming or anything processor intense. My Elitedesk sits on an end table under a monitor to the right of my recliner. I have another monitor mounted on a wall mount above that for other tasks while I'm watching UA-cam videos or doing other things on the main monitor.
as gpu and air cooler is 1+ kg each, actually horizontal layout makes more sense than vertical one. we need new motherboard form factor. atx was designed before those heavy gpu and air cooler exist.
I have an old CoolerMaster HAF XB case, which i use in my gaming PC build. It has seen Ryzen 1600, 3600, and now 7800X3D alongside with a 4080S (which just so fits, lengthwise). No Graphics Card sagging, and no overly bent 12VHPWR cable, since the case has enough room for a nice wide radius bend. The case is standing nowhere iwant to add. Its a Big box which i dont want on my desk nor on my floor (due to cleaning robots)... Its dangling below my desk, and held where with 3D printed parts.
Love this type of historical perspective on various aspects of technology. Interest lies in how design of equipment caters to the user needs over time, reflecting shifts in technology advancement.
My first PC, a 1991 Gateway 2000 386SX, had a horizontal case and I, of course, mounted the monitor on top of it. I upgraded it numerous times before getting my first tower in 1996. Towers or laptops ever since....
I remember it was somewhere around mid 90's they just stopped horizontal and vertical just looked more "futuristic". To my young self they looked the same size only flipped. Monitors weren't small at the time and were already 16" or 17" and chunky. IMO it was a stylish thing, just like hardware turning black instead of beige later.
The system I'm typing this on was built in a Silverstone ML04B HTPC "horizontal" case. It looks like part of a '90s Hi-Fi stereo. Important for anyone who wants to build a system with a higher TDP CPU and GPU than a typical media center build: you're going to need four good quality 80mm fans for the right-hand side of the case, along with a 4 way fan power splitter. I have mine set-up as intake fans, relying on the grill on the top of the case for exhaust. Also, unless you get creative with the horizontal full height PCI-e slot in the case, and get a PCIe riser cable, you're stuck with low-profile GPUs in the ML04B, along with several other cases from this series. Doesn't bother me, I don't game much anymore, and I'm content with an RX 6400. For gamers, though, looks like the best you can do is an RTX 4060 Ti 16GB.
Only my first PC was a desktop (a used 386). After a while I needed to upgrade to a second monitor so I built my first PC (486) and it was a tower... Before that, I was using Amiga computers and they were all desktops...
@@pepinlebref7585 Yes, I really miss those wonder years. Amiga 500, 600 and 1200 were indeed inside the keyboard. But 1000, 2000, 3000 and 4000 had case similar to PCs.
For me the tower PC was all about cooling. Early PC power supplies were unreliable and the big killer was heat build up. Horizontal PCs needed giant fans for cooling, putting more strain on the power supply. Tower PCs used convection as well as a fan for cooling. I still had to replace the power supplies in my early towers, but less often than on a Horizontal PC. At work my colleagues designed a wall of monitors, each with its own PC to fo in the board room and display Financials in real time. This was all put in with beautiful hardwood custom cabinetry. Since I was a data source for some of the displays I was made aware of the design and pointed out that the PCs would not be able to vent heat out of the cabinetry and they installed a fan system to my design.
Just before flat screens totally took over, I had a beast of a CRT TV - 40” (or somewhere around there, I can’t remember). The weight is no joke at those larger sizes. Funny thing is, my first flat screen was plasma, which was also super heavy. Both two-man lifts. LCDs make everything a whole lot easier.
There are plenty of brand new horizontal cases out there on the market. We call them tiny cases or Tinys. They easily fit under the monitor on your desktop.
My PC is less than two years old and it uses a horizontal case. I should probably mention that it is a NUC measuring about 6" W x 6" L x 2" H and sits under the monitor... no, the monitor doesn't sit on top of it... it literally sits on the monitor stand beneath the monitor. It could actually attach to the back of the monitor if it had screws for a VESA mount.
Growing up in the 90s, I still remember seeing the horizontal cases a lot, but mostly in the outdated computer lab for teaching us as kids how to use computers. OREGON TRAIL ALL THE WAY!!! XD
I was trying to build some small computers with a mini-itx for work stations and I was surprised that cases that were small required a special power supply (sold seperately) and I would see lots of comments of those power supplies failing so I ended up building hybrids, they were cubed shaped cases, not as compact as I wanted but it did the job.
Considering our offices across the globe has tens of thousands of PCs that are not towers but horizontal, I'd say it's not that hard to find them. They are just oriented at a office environment. SFF (Small Form Factor) were quite common not that long ago and while you can easily get an SFF modern PC, they are leaning towards the DM (Desktop Mini) form factor. Take for example the HP Elitedesk 800 or 600 series PCs. They come in DM, SFF and tower formats. Though if you ask me, even the tower is more of a horizontal chassis just propped up sideways (all the USB ports would be sideways from what you'd be used to)
Horizontal cases make a lot of sense these days. With enormous video cards a horizontal case would mean no sag. Monitors are way lighter now so they could sit on top of the case just fine.
@@Elatenl if you spend a bit more you will find cases are sturdy. the cheap ones are indeed pretty flimsy.
@@Elatenl A horizontal case with a monitor on it takes up less space than a vertical case and that same monitor.
Moreover, even if the cases aren't as durable(depends on the case), the monitors are also much lighter, so at the very least it evens out.
But will vapor chambers work on vertical mounted GPUs?
I have a system set up like that using the Cooler Master HAF XB EVO case. 27" monitor sitting just fine right on top. This should make a comeback. I'd love to see a horizontal case with a built in monitor arm if done right. My main is the newer style that quite frankly with modern gpu's being 3-4 slots and prone to sag (I have to use an anti sag bracket and still worry) is rapidly loosing viability for higher end systems, especially when you add in air cooler that have to supported to hang out sideways stressing the motherboard and pulling against good contact.
@@Elatenl My Cooler Master horizontal case is quite solid and neither the gpu nor the cpu heatsink are adding sideways stress to the motherboard and my 27" monitor that weighs less than 1/6th what my last (15") crt did has zero effect on the mesh top.
I believe that graphics cards would benefit from horizontal box.
Graphics Cards but also tower coolers. The shear stress would be much lower.
That was our first thought as well. Perhaps we shall see a return of horizontal PC cases to support the new heavy and large GPU's.
i layed mine horizontal
no need for case i just topled my old one from q6600
I've got the thermaltake cube case. It is horizontal. I find it better for my 4070ti because I don't need the stupid stand to support it.
One issue though. I've rack mounted my server and gaming pc, so they're both horizontal. And they're both in 4u cases, and even in a 4u server case, i had to cherry-pick a 4080 that would actually fit and then still i had to get 90 degree power plugs because the regular ones take too much height.
Worked out in the end, but a tower is wider and doesn't have that issue.
My first job was data entry in 1984 after the company got their first computer. It was a Tandy TRS-80 Model II. They replaced it a year later when the first IBM PC came out. I moved the horizontal case to the side of my desk vertically to make room on my desk. They freaked out and called an early IT company to make sure it was okay to lay it on its side.
I like this story, very interesting.
Haha
Cool story
Yep, same here! Working on a cramped desk aint much fun.
Was fine on the PC with dual full height floppy drives. I did that with an IBM XT and it crashed the 10 MB hard drive.
Towers were traditionally introduce to offer more expansion bays, tape drive, floppy drive, cd,expansion cards at rear like video toaster, etc. it’s odd we still use this format when very few computers have bays anymore let alone an optical drive.
What’s equally interesting is that most servers are in a 1U or 2U form factor to go into racks, so they are horizontal vs vertical.
Exhaust fans on a 1U or 2U are so small they have to whine loudly to do their work. Home users won't allow that. So minimum height of a desktop pc is the size of a quiet fan.
@@bgezal agree, you would think in this day and age, they could come up with silent fans.
But those racks are vertically oriented.
And for much the same reason that desktop cases, horizontal real estate is generally more valuable than vertical. A vertical tower is a more efficient use of your desk space and a vertical server rack is a more efficient use of the server room / data centre.
@@dave24-73 If we could make perfectly silent fans, then we could make perfectly frictionless engines. Or a guitar string that makes zero sound waves when it vibrates. The physics of it is just not possible. Best we can do is change the character of the fan's noise, muffle the sound that it creates, or shut the thing into a server room where it doesn't matter how loud it is.
@@dave24-73 A smaller fan has to run at a much higher RPM to move the same amount of air.
When they were actual desktop computers, not under-the-desk computers
deskbottom computers
@ZaHandle Yea mine is on my desk don't need it sucking up any more dust then it needs too.
@@kirkanos3968 That's why I made myself a special shelf under the desk
I just built a white case with pink accent and light.
And put it under the table...
Ever since those idiotic case designers moved the PSU from the top to the bottom, they became Desktops again - at least for civilized people who have carpets, because they can clog and destroy a PSU.
While not optimal with the usual airflow config, you can literally just take a tower PC and tip it on its motherboard side. Tada, horizontal PC!
Big brain move
Which is what I do. Works great, and airflow isn't impeded.
mines tipped but the motherboard is hanging upside down, on a wire rack that also holds my other AV equipment, side panel off so most dust settles to the floor.
Reported.
@@zeroturn7091 y?
You know what else changed? Computer desks got taller. Once towers became popular, desk designers realized they could raise the main shelf to a height closer to where a monitor ought to ideally sit, instead of optimal wrist height, and add a sliding undershelf for the keyboard and mouse. If you tried stacking your monitor on top of a whole 5-inch PC nowadays, it would be too high.
I see it other way around - monitors got much bigger. It's fine if 15" CRT sits 20 cm off the desk, and it's roughly at the proper height, ergonomically. I have 38" LCD now even with VESA holder I don't have space under it for anything. I could slide in my phone under monitor, perhaps.
Desk height didn't really change unless you count standing desks. The thing that changed was monitor size as you could have bigger monitors along with monitor stands getting taller to keep them at optimal eye level. Also, it wouldn't really be too tall if you had a shorter monitor stand.
Forget the orientation, where is my Turbo Button
3 digit LED display FTW 😂
In case you're actually wondering, it's completely automated, CPUs nowadays constantly fine-tune their speed by complex alrorythms based on load, cooling capabilities, die quality and other parameters.
Turbo button actually used to slow cpi down due older games that used cpu clock for frame gen if I understand correctly
@@yeruschmift8422 so you're just pretending this is better than having a big turbo button for that sweet sweet dopamine?
@@yeruschmift8422 More accurately, the reason for the "turbo" button was actually to slow the computer down for compatibility with old games (i.e., games designed specifically for the IBM PC and PC XT)
So the REAL reason we don't have it anymore is that, some time in the mid-80s, we stopped writing code under the assumption that it would always and forever be run on a 4.77MHz Intel 8088.
"Pizzabox"/horizontal PCs were common especially in offices well into the 2000s.
Libraries, too. Even going into the 2010s, all the public computers in my local library system were pizza-box Dells with LCD monitors placed on top.
We still use horizontal PCs in my office, and none of them are older than about 7 years old
@@partysodown You don't use NUCs yet? Many Offices I know only have the NUC attached to one of the VESA holders of the screens, because most offices don't need more computer power
Still are sometimes
I think of "pizzabox" as a desktop with all drives aligned horizontally in a single row, specifically the Power Mac 6100 and its Performa equivalents. Its height allowed for only one horizontally mounted expansion card, compared to the 7100 with two rows of drives and three vertical expansion card slots. The 6100 never got a successor in the same form factor when Apple switched from NuBus to PCI.
I just want 5 1/2in bays back so I can have an optical drive inside.
I'll go a step further, I also want hotswap hard drive bays as well.
Plenty still have them, my new Fractal Pop Mini has a DVD drive and card reader in its two 5.25" drive bays
@@jsncrsoits not "plenty", its like a small handful of cases have drive bays and theyre almost always hidden behind a door or flap. i need three external bays minimum and im trapped buying either gigantic cases meant to go on the floor as theyre almost as tall as a desk is, or budget cases from a decade ago that still have stock sitting around in store warehouses.
Used cooler master stuff from like 5 years ago still have them and surprisingly robust front IO options. I got a HAF 932 (I think that's the number) that was perfect for my first build last summer. Honestly the only thing that shows the age of the case is my front IO has firewire
Got a USB disc drive VHB taped to the top of my tower! 😅
There's a missing dimension in there, though: old horizontal cases aren't nearly as *deep* as current full-sized towers. Most desk setups these days have the monitor pressed up against the back wall, with the rest of the desk's depth devoted to keyboard and mouse space. Dropping a 244-305mm ATX mobo into that space pushes the keyboard forward. Of course, an ITX build would fit better, but the whole point of SFF cases is that they can fit just about anywhere
And not only that, but Coolers and GPUs have also gotten wider. If i put my tower on its side it's quite a lot higher than most of those old horizontal pcs because of that.
@@reappermen And one more thing: At the time of the Desk Desktop PCs, you normally didn't needed to access your connectors. So the backplate was really a backplate. All your Hardware was always connected to the computer, be it the mouse, keyboard, printer etc. You only had your drives at the front. But when USB came along, it became annoying to always have to go to the back of your computer. So a Tower was also good there, as in the beginning you could plug in an USB card into your PCI slot and there was a cable attached so that you could put one USB connector also at the front of your tower - and later they started implementing front panel USBs and audio connectors directly into the cases. In the 1980s at the front you only had your disk drives and the power button.
@@acmenipponair well, to be fair that is not much of an issue, there is no reason why the couldn't fit a connector panel to he front, sides or top of a horizontal pc
@@reappermen I could see a blow-through case working, one built around two banks of twin 140mm fans. That sets the height and depth of the case at 140 by 280ish mm. Make it MATX/ITX to trim the width down to a manageable... 300, 325mm. The GPU would need a riser for a 'vertical' mount; some vent holes in the top cover would let it breathe, and an AIO would solve the CPU cooler height problem. Not sure where the PSU would go.
Excellent point, back in the days fans was the PSU fan and later an small cpu fan.
Also as pointed out the screens is much larger so you can not have something thick under it anyway.
I'm old enough to remember that the original name for these cases were "Desktops". There were "Towers" and "Desktops". Why does this video not mention this at least once?
That's exactly what I thought! 😁
Probably what happens when-- ADHD hacks-- LTT tries to do a short format video.
I guess it might sound confusing to some of the audience, who were not even born back then... Actually I think many people working at LTT-MG are too young for that.
My brain: 🧠
“Why is he explaining floppy disks?” 🧐
“1984 was only… 40 years ago!” 😱
“We are truly living in the future!” 🤩
“ …when did that happen?” 🤨
“Hope we’re in a Sci-Fi Utopia timeline…” 😇
“…not a Sci-Fi Dystopia one.” 😅
“Thank you for listening to my Ted Talk.” 😘
you dont have to put emojis after every sentence
When I worked at Dow Chemical, in the Process Modeling and Advance Control group, I got a Quadra 700 to be shared by the team. Most of us had 286 PCs as our personal machines. My boss had me hire a vendor to make a bespoke rolling desk for the machine.
Home theater PCs are designed to fit on a shelf and be stackable with DVD/VCR players, amplifiers, or other stereo pieces (which almost always come in horizontal cases).
The problem is with GPUs getting bigger & heavier a horizontal case would cure that problem. For me I have a horizontal case (a SilverStone GD08 Grandia) for my main rig I actually prefer it now. No light, no bling, just pure performance without the unwanted power draw. I have a turntable sitting on top of it to (a Audio Technica LP3) for those times when I want to go analog.
Dude, I have the same model. The only bling I have in it is the exhaust fans have RGB but it sits on my desk so people walking by know that it's on.
I have the same case and love it. I also really appreciate that Silverstone sells port kits to retrofit their older cases with a front-facing USB 3.1 Gen 2 Type C port for cheap, and that the case is optionally rackmountable.
I am considering the GD11 for my HTPC
@@yousuff1 nice case. 😁
Me sitting here with a Silver stone horizontal PC case and its a gaming PC.
Vertical cases were popular because of the expand ability. When they started their rise you had 2 differnt graphics cards, one for 2d and one for 3d, you had a sound card, you had a midi card. A card for your printer, a card for the modem. A card for controllers, a CD drive, a 5.25 floppy drive, a diskette drive, DVD drive, CD burner etc etc. Horizontal cases were limited on space.
These days horizontal cases make a lot of sense because you don't have a lot of expansion use anymore like we had in the 80s and 90s. They also eliminate the GPU sag issues. The main hampering issue is the RGB vomit crowd.
@Wolfstanus
True.
Instead of expansion bays, I actually enjoy using plug-and-play with the USB-C ports or Thunderbolt ports.
In the future, I would like to see wireless drives that use Bluetooth or Wi-Fi or some other wireless protocol ... to reduce wire/cord organization.
A few years ago, I did buy an external Western Digital wi-fi drive.
The wi-fi connectivity was not 100% perfect ... probably due to compatibility/driver issues ... but I would say it's a step in the right direction.
... but I know that hard-connecting to the PCIe bus is more preferrable, for speed.
@@zeryphex The issue for me with wifi/blutooth is that its unreliable to unusable in my environment. Theres too much interference. Even wireless controllers are questionable and wireless speakers don't work half the time.
I just prefer to have my drives connected and inside my PC so It doesn't get lost, I don't have to look for it. I don't need a power brick, another surge protector etc.
But in the future they don't want you owning anything so drives of all kinds are going to go away. We are already heading in that direction
On the other hand... the way I remember the times when towers did become more popular it was allready around mid 90's... Common PC had usually one graphics card, a modem and maybe a soundcard. But even soundcards disappeared quite quickly as the integrated sound chips were replacing then fast.
And back in the desktop case era, motherboard didn't often support even P-ATA's, but required an adaptor for drives too.
And as far as RGB goes... I don't think case orientation means much no matter which way you are leaning for... Different, maybe. But there are options.
As for the reasons why the desktop case is not really gaining much popularity. I think the number one issue is in displays. Back when monitors were 15" at max, it was actually good to have it slightly higher. But as displays got bigger, to get to ideal height, you would really squeeze your setup thin... And that would leave very few options for cooling and set other limitations as well.
@@JuhoJohansson-bz3jb OK , Video card, sound card (sound chips were extremely hit of miss even in the 2ks and not one could do dolby surround.) modem/Ethernet card and other peripherals like scanners, fax, printer were still common in the 2ks. Meaning you had to have a tower to fit all that in. Oh and then you had SLI in 98 through the early 2010's so lets slap in up to 4 additional video cards. Then lets not mention USB still needing its own card if you wanted more then 2 in most PC cases at the time. Oh and media duplication was common so most people ended up having 2 burners because it was faster to burn a cd that way and didn't require taking up space on your hard drive. Oh lets not forget the TV capture cards that had gotten pretty popular in the 2k's because of machinima and "montages." Especially with the halo crowd. Oh and floppy drives were also common on just about every PC in the 2ks.
A tower just offered more for the average consumer. Not everybody had all that stuff but the expand ability was a huge driving force.
As for the RGB thing. Computer cases now are made to be on the desk and be a centerpiece. It was half facetious comment about the aesthetics crowd that chases pretty lights over functionality.
Sure there are options. I have one sitting right in front of me on on a blank of wood on the floor . But there's a reason they aren't common. They are small and they aren't "Aesthetic" for the PC enthusiast and those people spend more money on a PC and are the driving force for trends. And one of the biggest reasons your computer case is big today is, your graphics card
@@Wolfstanusas far as printers go, the ones we had at the time all used LPT-port wich was usually supported directly by the MB, even back when IDE was not, and cases were equipped with the LPT long after most had allready gone to USB...
But in my own personal experience vast majority of computers were fast losing expansion cards rather that stacking them up.
Eventually leading up to the point where some of the office computers didn't have any of the slots filled. And some so called "gaming" PC's had just one for graphics. And I personally had at one point a graphics card capable of video capture.
But this is just my experience from the mid 90's to early 2000's. Spanning machine generations from 286 to Pentium 4. I do understand that other people have different experiences, but this is what I experienced at the time. Sure I did read about rather crazy setups, but didn't know anyone who could put that much money into a computer to actually do some stuff they wrote in the magazines at the time. And as far as I know things like four way SLI didn't turn out to be much of a success... SLI in general was not selling very much and because of that gained little software support, wich made it simply too expensive for the little actual benefit and eventually they just gave up on that idea...
No mention of business SFF PCs such as Dell Optiplex SFF and HP Prodesk SFF computers. Used widely in businesses and schools in which the CRT stand stands on. And weird number crunching farms.
"Weird number-crunching farms"... do you mean cryptocurrency mining?
@@InventorZahran Distributed Computing BOINC and Folding farm
That big red toggle on the IBM was the God of Satisfaction switches
Had 2 5150XTs in the 90s, that switch always stuck with me. It’s too bad that no one will bring that back unless one were to find a donor then graft it onto a new case.
I have an PS/2 model 50, and still is
And the hard disc's at the time used stepper motors for head alignment. Over time wear patterns would form. This was not normally an issue until the user changed the cases orientation from horizontal to vertical and vice versa. When a customer would call us because they are suddenly getting CRC errors we'd ask if the computer had changed orientation. Sure enough putting it back fixed the problem.
Hard disks have not used stepper motors for head movement since the early 1990's at the very latest. Noting that the IBM PS/2 at launch came in desktop aka the Model 30 and 50, and tower aka the Model 60 and 80.
@@jonathanbuzzard1376 It's been a while. Maybe it was a worm gear? Whatever the case changing the cases orientation usually fixed the issue. When did disk platters start being used for the servo tracks?
Never mind that, where are my sweet sweet 5.25" bays at nowadays? 😅
I have 3
Blame the gaming influencers. Now fish tank cases are prioritized.
I'm never getting rid of my HAF932.
My Silverstone Grandia GD08 HTPC case has two. The latest iteration even has front-facing USB 3.1 Gen 2 type C ports, and you can buy the port kit separately to retrofit older cases. It's even rackmountable with optional hardware.
@@bartolomeothesatyr my silverstone has 4
Why doesn't anybody build a tower with a VESA mount in the middle of one side for a monitor, and all the front panel ports and power and headphones on a foot that protrudes forward under the monitor from the the bottom edge of the case on the same side as the VESA mount? Uses dead space behind the monitor, simplifies cabling, gets rid of the need for a monitor or desktop hub, clears up the space of the current tower. Because now that I've thought of this, I want this case but it doesn't exist.
There are small form factor cases that attach directly to VESA mounts behind your monitor of choice. It's not suitable for high-end hardware and it's not *_quite_* what you're describing, but with a decent AMD APU and a USB DAC breakout box you're 90% of the way there and can game if you want.
@@bartolomeothesatyr Yes I know; I'm taking about the reverse. I want the case to hold the monitor, not the other way around.
@@thomasafinethin sheet metal cant handle that, so they'd have to redesign the case to handle that
@@bradhaines3142 You just said what he said. Why don't they design cases with vesa mounts? Thin metal sheets can be reinforced, just look at the size of vesa wall mounts, not very bulky.
They have those crappy read displays for temps and animations currently, so we're kinda getting there.
It's a nice idea and i like it.
Horizontal PC cases are still alive and kicking. Glancing at the one on my desk as I'm watching this video.
what brand & model is it?
Almost all smb computers are horizontal cases
I know. Or just turn the tower sideways.
It's like that was a waste of a video.
I have a Cooler Master HAF xB Evo.
They are rare and expensive, and also scummy. I have a Jonsbo G3 and hate it with my whole existence.
I bought it for the huge analog volume wheel and LCD display and both are scams. The LCD can only show the Jonsbo logo and the volume control, well calling it unreliable is an understatement, every time I touch it it randomly changes the volume, it canot even gurantee that turning it right will make the volume go up.
Hah, jokes on you, I put my tower horizontally and stack my LCD monitor on top, on my desk!
I did the same with my Antec case and I'm using a monitor arm so that the screen is flush with the case top (side)
those 90s cases were way better than those flimsy fish tanks with RGB lights
Don’t let the Quadra 700 steal the spotlight from the Mac II! The 700 case design was based off the IIci/cx which had footpads that could be moved so the case could be horizontal or vertical.
YES YES YES YES YES I had a 2ci for a while, so so computer but what you mentioned? mmm loved it.
With sit-stand desks, a horizontal case would actually make a lot of sense again. Even with a monitor arm, you could tuck it under the monitor without needing to worry about it tiping over or routing all the cables up a changing distance.
Hey, I miss these types of cases just as much as you.
A horizontal type case saved you so much space on your desk or floor and added extra breathing room for all your internal hardware.
IMO, I think computer heads just didn't find these types of cases appealing anymore and they just went out of style.
Horizontal PC cases NEED to make a comeback! I want to set my computer on the table instead of on the floor because I keep involuntarily kicking my PC tower and as a result my case is banged up and the front USB ports got ruined. It's time to make horizontal computer cases cool again. Who's with me?
If you don't have a glass side panel, nothing probably stops you from doing it.. unless your table is too small, ofc.
@@OctavioGaitan Horizontal cases saved space when your monitor was a similar shape and size to the case. With very wide and thin monitors they would waste a ton of space.
@@88porpoise Wasting space? The monitor is wider than the case! Just measured mine: 510mm wide, vs 440mm wide for the horizontal cases I do have. The reason I'm not using them for this machine is a lack of drive bays. They get designed for HTPC usage, and thus only have a couple of bays, because that use-case assumes you're going to be getting most content off a network. The few 5.25" bays they do have are usually behind slots for an optical drive tray to poke through, so they're not usable for anything else you might want to put in one, like a hard drive rack.
@@Roxor128 now measure the depth
Crazy proposal: Why not simply flip the tower over for a horizontal case?
Glass panels.
@@touma-san91 not every case has those, chief
Practical, but may look goofy with the front panel controls designed for a vertical tower. My IT guy where I work keeps one of the PCs like that with the side panel off exposing all the guts.
Mechanical disk drives might not like the sideways mount, and you'll almost certainly need a solution to prevent scratching the desk and/or case. Besides that, should work fine.@moritz3930
Nowadays that would probably work again because DVD drives aren't common anymore. Only problem are the feet, power button etc
Easy solution: Put a monitor arm on your desk and have the monitor floating above your horizontal case.
And here I am using a 4RU rack mount case because there was no decent horizontal cases available when I last upgraded
The horizontal case configuration was really popular in office and school settings back in the day. I remember the computers I used in my school library in the early 2000s were set up that way.
It was also the ideal setup for angry office workers who would take their rage out on the CRT monitor thinking that was the actual computer itself 😂
Until those weird iMacs.
Plenty of workstations still come in a case that's designed to operate horizontally as well as vertically esp. for Point of Sale systems for cashiers and for functions on factory floors.
Real ones remember the coolermaster HAF XB, it had loads of space which made it super easy to build and was horizontal, it also had loads of room (I think like 300+mm) for GPUs
fk yeah, I'm still using mine after all these years, thing is a beast. I also never worry about GPU sag as the graphics cards get bigger and bigger.
@@froztkingtv NICE? do both amd and nvidia GPU's fit?
I still use mine
Some horizontal model desktop microcomputers became my second wish after the IBM Displaywriter, along with the printer. I just acquired a "new" skill in word processing. I fell in love with it way above keypunch keyboarding on the key-to-disk data terminal. Today, I have a Dell OptiPlex all-in-one microcomputer, a Canon color laser printer, and a Brother P-touch label printer. They all add pizzazz to my file production and keyboarding to do various jobs easy as never before.
Yesterday I was looking for horizontal cases, found none in my country. Best suggestions were to find a suitable tower and lay it. Actually not a bad idea.
Mine is horizontal; a Viglen Genie case and I love it.
I love the console look, but prefer the PC experience and now I can have exactly that.
Are these sold for DYI anywhere. I have a Cooler Master HAF XB EVO, but am interested in other Horizontal cases.
School PC.
@@smiths7317 Ahh so half a step down from office level. And cases only avail used, and thus likely hard to get specs for. Thanks for answering.
@@smiths7317depending on specs, more like sleeper pc
@@kaseyboles30 Typically, you can obtain the specs via searching google for "RM + Model number + specs" and specs sheet comes right up, and drivers are locked behide a wall that only schools 'n' collages can access.
These machines are made in the United kingdom - England, under 'RM PLC'. The 2010's RM computers typically have Intel core 2 Duo with 2 x 1024MB DDR2 755Mhz, sata disc drive and sata hard drive 250GB capacity.
Schools 'n' collages lease these RM computers out and during "End Of Life" are replaced then old ones sent back to RM for waste disposal. Gotta be lucky specimen to end up on ebay 'n' saved from having internals scrapped out for precious metals.
RM plc stopped making their own branded machines in 2014 and began selling Dell,Acer,Lenovo,HP.Packard Bell, office PC's.
horizontal cases are desktop cases, what people mistake as desktop cases these days are called towers, always have been always will be.
I had my new gaming rig built by a builder company in Utah, a few years ago.
I specifically wanted a horizontal PC case so that the graphics card could rest with gravity instead of being suspended in a vertical tower.
(I know that some companies provide support sticks or support grips for graphics cards in vertical cases.)
The builder company had other cases advertised on their website, but they obliged on my custom request.
I just had to prove that I had a valid bank account, and I sent them a screenshot of my local bank branch manager's business card.
They bought the horizontal case I wanted, and they built my PC, and they shipped it.
All the empty spaces inside the case were filled with very firm foam packs ... which helped with keeping wiggling to a minimum.
wouldnt horizontal pcs also eliminate the gpu sag Problem?
Came here just to say this
As would a vertical GPU mount, which many modern cases support. My current case ONLY supports vertical GPUs.
Yes, that’s probably why some case manufacturers are starting making desktop towers that are designed to be vertical or horizontal
I was just thinking this exact thought while mucking around with an old Power Macintosh this morning. You guys are scary mind readers sometimes!
Now to be fair, they likely made this a week or two ago and had to do production stuff, then upload it on their schedule.
I truly believe there is a subconscious hive mind of thinking or communication that happens amongst all humans. Not just in person or crowds but the world over. Many things have been invented at similar times in history across the world.
It seems again for nth time apPlE pioneered tower PC cases 🙄
I've built this year a smaller PC in Chieftec Pro Cube case. It's rather a cube, but it has motherboard in horizontal position. This is probably my favorite case I've ever used to build a PC and my first PC in the early 90's had a horizontal case.
Though my main PC uses standard tower, but it is much wider than my previous builds. The best part is to have a lot of space to fit all the cables behind MB.
The Quadra 610 and MAC LC2 were two of my favorite designs.
I had a LCII with a whopping 12 MB RAM, from which 10 MB could be used. This thing was a beast, the pizza box of doom!
Have 2 HTPC cases (Linux game PC and NAS) + audio receiver with a OLED TV on top, it just offers better heat dissipation with components mounted this way and you can put stuff on top, you guys should try it lol.
Silverstone Grandia GD08C FTW.
@@bartolomeothesatyr Exactly, i have the Grandia GD07 HTPC since it can hold 8 HDD's and a Zalman HD160XT with a touchscreen mounted in front.
You can still just... flip your tower. I did this so that my GPU remains firm.
You can, but the now-bottom gets scuffed due to lack of feet, and the old feet are now visible & look weird. And either you don't get tempered glass, or I'd be worried about the glass breaking from long-term fatigue from the monitor's base.
@@crash.override I have my monitors on a dual arm that hangs above it. Although I now remembered, this is not recommended if you have Hard drives.
On my case you can remove the feet, thought every modern case had this function
@@crash.override You do realize you can buy stick on feet to use it that way...
@@crash.override But a mat fixes that (which is what I use), and bc the mat is smooth on the bottom, it makes it really easy to swivel the entire case to get access to the rear ports for when I need them.
Yup. Me too. But also it makes the front panel (actually top-panel) USB ports and power switch closer to me and a casual reach to my left, when i sit at my desk.
2:25 This is not so hard to believe if we know that the design of the PS2 case was bought back from Atari. It was originally designed for the non-released Falcon Microbox computer in the early 90s.
I use a "Cooler Master HAF EVO ATX Desktop Case" because it's very easy to keep components cool in it and it offers a lot of space. I like my choice and it serves me well.
I recently purchased a batch of 20 'old stock' horizontal PC cases from the Aopen brand. Fantastic cases with very reliable (300 watt) PSUs. I have a customer who wanted some small PCs with a Blu-ray drive in them, cases that can accommodate these are almost extinct.
Cool, that's awesome! Just an important note - I'm not sure if you're saying those cases are old but if they are, definitely don't use the power supply included with it, old power supplies will be very unsafe. Especially if they were manufactured during the GREAT CAPACITOR PLAGUE (2000s)
Also 300w is not much for a modern system.
@@charliesretrocomputing The cases are from 2009 and I have unscrewed each PSU and they look fine and they also work fine. The PCs use 120 watts of power (measured from the wall socket), so 300 watts are more than sufficient. Aopen were one of the only cases that had reliable and 'free' PSUs at that time.
@@Mother_Mercurywouldn't trust my data with it. PSUs are cheap, especially low power ones like you'd need. 2010 is 14 years ago....
@@JordanJ01 I still have 10 of these cases in case a power supply breaks. Luckily I could buy them cheaply. I also made it clear to the customer that I cannot guarantee anything if something goes wrong with the PSUs. He insisted on buying the PCs as is because it was cheaper. I also offered to install a Pico PSU, but he thought that was too expensive.
@@Mother_Mercurythe issue is the capacitors in them will be old and unsafe. sure theyll work but its like popping in a AA battery from a decade ago and just leaving it in your device because "it still holds a charge".
The trend needs to come back! 😀
Look for home theater style cases. Silverstone makes them also. I have a GD-08 and I love it.
Seconded, I also have and love the Silverstone Grandia GD08 HTPC case!
Tempered glass is one of two reasons I built my brand new Ryzen in my brother's old Antec P183 (released about 15 years ago) this January. (The other is "must have room for two optical drives AND silicone mounts for my bulk drives"... I'm a data hoarder.)
I still use horizontal cases for my builds.
Desktop - Cooler Master HAF XB
Living room - Silverstone Grandia
Workstation - 19"
You will only really find workstation PCs in a horizontal format.
And HTPCs.
most test benches are in horizontal format.. (open no case around it, but with holders for MB,SSD,PSU, power/reset button)
My SIlverstone HTPC case begs to differ. Although, tbh, I mostly use it in a workstation role.
The horizontal HP prebuilt case sitting next to my desk rn: 👀
Enthusiast PCs are almost always towers. But vendors still sell office PCs in both tower and horizontal configurations. HP Pro and Elite SFF PCs, for example, are available in a horizontal configuration. My mom has one of these that's a few years old.
One of my favorite computers, the Tandy 2000, was also the first business PC-like machine to be available in a "tower" configuration. It was a horizontal box like the IBM PC, but Radio Shack made available an optional stand on which it could be mounted vertically, letting you set the machine to the side of your desk instead of on top. Great if you had a hard disk (the Tandy 2000HD variant).
I got my custom built computer made specifically for horizontal orientation and it works wonderfully! Its much easier to access the inside when I need to replace or work on parts and easier to put a CD or DVD in the drive. Small Form Factors especially work well for that kind of case and style.
0:28 Home theater PCs or off lease office PCs I've got a stack of 13 of them in my living room
Unless you were around back in the day, you wouldnt know. Many old computers were built like tanks. The entire case was steel and often reinforced with more steel. Only trim pieces were plastic, if there were any at all. You could pick up a computer and drop it - you would be more concerned about the the floor than the computer. Also, many people dont realize many modern vertical cases are actually horizontal as well. The have rubberized feet on the side, which people dont even realize are there.
As an example, the Apple /// computer was known for its ICs working their way out of their sockets, supposedly because the computer ran too hot. (Jobs strikes again!)
Apple is rumored to have told users to "pick the computer up off the desk and drop it" to reseat the chips.
@@LabCat Yep. Mind you, that was a pretty small case by today's standards.
I feel like too many people don't remember the small form factor market exists. Also server rack mount cases for PCs. I have one for my NAS. I don't have a rack, though.
Cuz we are all dumb and decided that brackets or risers make sense to deal with a GPU that weighs 500lbs.
Imagine how big the footprint of a horizontal desktop would need to be to fit a 4090... The card itself is an entire FOOT long. It's just not a practical form factor when you take into account the space, airflow, cooling, and power requirements of a fairly powerful desktop. Now if you had some sort of ducting or external cooler, you could drastically shrink the size of the case. But I think the PSU is still going to be your limiting factor. They're still kind of big, even for the compact ones. If you're not using a GPU or are using a small form factor GPU, there are still OEM PC makers (mainly HP, Dell, and Lenovo) that have old-school horizontal PCs, mainly targeted for business/enterprise customers.
@@McNasty43 no one said it had to go on the desk
@@zandane That's still a lot of real estate taken up on the floor. I think in most cases, horizontal spaces are at a premium, whereas vertical space is plentiful Think about how big cities are built. They run out of horizontal space, so they build upwards. Shelving maximizes the potential of a small horizontal space by going vertical. My game console, PC, and even my work laptop fit on the same desk because they sit vertically. Horizontal cases are just not an efficient use of space, however effective they would be for supporting huge components.
I’m only 20 and I remember this shit
No surprise. The last time I had a horizontal PC was only like, what, 3-4 years ago I think.
Fun Fact about the Mac Quadra 700: It was almost identical in case design to the (desktop) Mac IIcx and IIci, just with the logo and model written the other orientation. So the "tower" design was basically just aesthetics.
I have a kind of horizontal case, more of a cube form factor, it's a AeroCool Xpredator Cube, it's super easy to work in it and has plenty of space for all kinds of hardware and gadgets.
I'm still waiting for a more modern looking take on this design (that is not a ThermalFake), but in the mean time, this one is not going anywhere.
all pc cases are omnidirectional, it doesn't matter what side you lay your case on, as long as you're not snapping cables, you're fine
Was jusy gonna say well dvd drives arnt and then realised im the weord one that i still have my dvd drive in
@@ilenastarbreeze4978 Yah, my own internal drive tray wouldn't work too well on its side. I built my latest PC in 2020, but used a tower case with a front drive bay. I wanted an internal drive for my CDs and old CD-ROM games, and the occasional DVD.
Though some optical drive trays (especially older ones) have little snap-out tabs to keep the disc from falling out when used sideways. And laptop-style optical drives have that center hub you snap the disc onto, so they'll work in _any_ orientation.
Give me horizontal pc
The first PC I had was a horizontal one from the bran Compaq and I had it when I lived with my parents, which was 27 years ago. I often used it for high school papers and the games I played on it were the original Rise of The Triad, ROTT for short, and Terminal Velocity.
I'd love to see these come back. 😅
I'd also love to see optional drives come back into fashion as well.
Horizontal cases are making a comeback. I'd love to have one mounted to the underside of the desk.
13 views fell off give me money
😂
I've recently been considering getting a horizontal case again, so this was interesting. It'd be nice to have more options like we used to. To me, the low profile desktop is good for folks who need their monitor up a little higher and would like quick easy access to things like USB ports or DVD drives. I seem to remember some manufacturers even made towers that were desktop-friendly with drive bays that could be mounted in either orientation.
"BIG BOI!" 😂
I mean just look at how much more beautiful that pc on the thumbnail of this video is than anything made today. The bezels of the screen, the keyboard... everything.
Just a mention on Apple computers being used for graphic design...back in 1988 when I was considering buying my first computer, I looked through Computer Shopper (that huge magazine/catalog that I'm sure Postal Carriers hated delivering), PC Magazine, and other computer mags at the time to see what I would need for running AutoCAD as I was going into engineering. After thoroughly researching the subject, I found that the Apple II absolutely could not run AutoCAD and the Apple III fizzled out. So, I bought a Northgate 486 in a full tower (note that it was not a SX or DX -- those came later, the SX being that the integrated math co-processor failed in testing and the DX being the one that the math co-processor worked). It had a second socket for a Weitek math co-processor, though I didn't opt for one at the time. It originally came with a 5.25" and 3.5" floppy drives (I eventually replaced the 5.25" FDD with a SCSI CD-ROM drive), a large brick of a 213MB SCSI HDD (it was at least double the height and length of a standard SATA HDD and 5.25" wide), 4MB of RAM, MS-DOS 4.1, Windows 3.0 (upgraded to Windows 3.1, then to 3.11 For Work Groups). I had the computer boot up into PC Tools and from there I could go into DOS or Windows. Ah, the days when we could tweak the *.ini and *.bat files as how we wanted...Windows 95 and its Registry began the downward turn where Microsoft didn't want users to have control of their own computers. I will still use Regedit, though after 30+ years in the IT field, I know what I'm doing with it -- one of those things most people should NOT mess with, no thanks to MS. I was one of the first in my area at the time to have 2,400 bps MODEM (a lot of people confused baud rate with bit rate -- they're not the same; baud measures "changes in state" while bit rate measured the number of data bits, 1s and 0s, sent per second, so a whole string of 1s would not have a change of state until a 0 was sent).
Watching this video on a computer with a horizontal case I built it in in 2018. It slots neatly into the horizontal PC space on a computer desk from 1989, and my wide monitor fits on the shelf above it.
So... I have a horizontal PC case right now... it is my media center / NAS. And it is the Silverstone GD08. The only external mod is that I drilled a hole in the front to mount an ir receiver internal. It is a solid case, and holds a ton... I mean it holds 2x 5.25 drives AND 8x 3.5 drives. Add to that 2.5" adapters and you could have a total of 33x 2.5" drives, and whatever nvme your mobo holds.
All in a case about the same size as a cabinet stereo tuner/amp.
Plus when towers first came out, we really needed that ability to stuff extra drives in because they were limited in size. So there could be up to four or five HDDs, plus a CD-ROM drive, plus 5-1/4 and 3-1/2 inch floppies. Horizontal cases just didn't have the drive bays.
Part of that came from the form-factor of the motherboards of the time. Baby AT and ATX motherboards are similar in size, but rotated 90 degrees to each other, with Baby AT being long, and ATX being wide. Cases tended to be laid out so that the motherboard and cards were over one side and the power supply and drives were on the other. If keeping the case as shallow as possible, that meant having expansion card guides up against the front of the case. With ATX being wide and short, everywhere on the front is more-or-less equal for drive placement, so the matter of how many drive bays becomes influenced more by how deep a case the user is willing to buy.
My current rig is in a giant Silverstone HTPC case, it just looks nice. I don't bother with RGB or any of that, it just sits there in the corner and does its thing.
I'm a big fan of the Silverstone Grandia cases, I've got a GD08 myself.
The Quadra 700 was used as a mini tower, yes. But it was almost the same form factor as horzonal units, so it was used that way as well.
My pc is mounted horizontally under my desk, ports are still accessible and cables run under desk into monitor. Fairly clean setup.
Edit: originally I done it because my AMD 5900x was hitting 92c vertically, but when the pc was horizontal temps dropped dramatically. I'm assuming due to the weight of my air cooler.
SFFs usually have pads on two sides so they can easily sit horizontally and vertically. They're better off in horizontal direction since that's how the dvd rom, power button and logo are placed.
The point of towers was offering large numbers of vertically stacked (but horizontally operating) storage media drives while using the least space in your house. Now that optical drives have also all but disappeared the main reason is still overall use of floor and desk space.
Horizontal cases are still being made and sold. A lot of businesses still use them. I have owned several over the years. My newest one is an HP Elitedesk. Before that was an HP/Compaq Elite 8200. I don't do gaming or anything processor intense. My Elitedesk sits on an end table under a monitor to the right of my recliner. I have another monitor mounted on a wall mount above that for other tasks while I'm watching UA-cam videos or doing other things on the main monitor.
as gpu and air cooler is 1+ kg each,
actually horizontal layout makes more sense than vertical one.
we need new motherboard form factor.
atx was designed before those heavy gpu and air cooler exist.
I have an old CoolerMaster HAF XB case, which i use in my gaming PC build. It has seen Ryzen 1600, 3600, and now 7800X3D alongside with a 4080S (which just so fits, lengthwise).
No Graphics Card sagging, and no overly bent 12VHPWR cable, since the case has enough room for a nice wide radius bend.
The case is standing nowhere iwant to add. Its a Big box which i dont want on my desk nor on my floor (due to cleaning robots)... Its dangling below my desk, and held where with 3D printed parts.
Love this type of historical perspective on various aspects of technology. Interest lies in how design of equipment caters to the user needs over time, reflecting shifts in technology advancement.
My first PC, a 1991 Gateway 2000 386SX, had a horizontal case and I, of course, mounted the monitor on top of it. I upgraded it numerous times before getting my first tower in 1996. Towers or laptops ever since....
I remember it was somewhere around mid 90's they just stopped horizontal and vertical just looked more "futuristic". To my young self they looked the same size only flipped. Monitors weren't small at the time and were already 16" or 17" and chunky. IMO it was a stylish thing, just like hardware turning black instead of beige later.
I use a SGPC K66 Air case for the PC at my office. Horizontal on the desk, chuck a monitor on top of it. Saves a lot of space
Ironically, if you have not discovered the world of wall/desk mount monitor arms, you are truly missing out on a lot of desk real estate :D
I always prefer the horizontal PC look because it gives out less space.
The system I'm typing this on was built in a Silverstone ML04B HTPC "horizontal" case. It looks like part of a '90s Hi-Fi stereo. Important for anyone who wants to build a system with a higher TDP CPU and GPU than a typical media center build: you're going to need four good quality 80mm fans for the right-hand side of the case, along with a 4 way fan power splitter. I have mine set-up as intake fans, relying on the grill on the top of the case for exhaust. Also, unless you get creative with the horizontal full height PCI-e slot in the case, and get a PCIe riser cable, you're stuck with low-profile GPUs in the ML04B, along with several other cases from this series. Doesn't bother me, I don't game much anymore, and I'm content with an RX 6400. For gamers, though, looks like the best you can do is an RTX 4060 Ti 16GB.
Only my first PC was a desktop (a used 386).
After a while I needed to upgrade to a second monitor so I built my first PC (486) and it was a tower...
Before that, I was using Amiga computers and they were all desktops...
Amiga... brings me back to my childhood. What a nice machine with plenty of "free" games. The computer was basically in the keyboard.
@@pepinlebref7585 Yes, I really miss those wonder years.
Amiga 500, 600 and 1200 were indeed inside the keyboard. But 1000, 2000, 3000 and 4000 had case similar to PCs.
For me the tower PC was all about cooling. Early PC power supplies were unreliable and the big killer was heat build up. Horizontal PCs needed giant fans for cooling, putting more strain on the power supply. Tower PCs used convection as well as a fan for cooling. I still had to replace the power supplies in my early towers, but less often than on a Horizontal PC. At work my colleagues designed a wall of monitors, each with its own PC to fo in the board room and display Financials in real time. This was all put in with beautiful hardwood custom cabinetry. Since I was a data source for some of the displays I was made aware of the design and pointed out that the PCs would not be able to vent heat out of the cabinetry and they installed a fan system to my design.
Just before flat screens totally took over, I had a beast of a CRT TV - 40” (or somewhere around there, I can’t remember). The weight is no joke at those larger sizes. Funny thing is, my first flat screen was plasma, which was also super heavy. Both two-man lifts. LCDs make everything a whole lot easier.
There are plenty of brand new horizontal cases out there on the market. We call them tiny cases or Tinys. They easily fit under the monitor on your desktop.
My PC is less than two years old and it uses a horizontal case. I should probably mention that it is a NUC measuring about 6" W x 6" L x 2" H and sits under the monitor... no, the monitor doesn't sit on top of it... it literally sits on the monitor stand beneath the monitor. It could actually attach to the back of the monitor if it had screws for a VESA mount.
Growing up in the 90s, I still remember seeing the horizontal cases a lot, but mostly in the outdated computer lab for teaching us as kids how to use computers. OREGON TRAIL ALL THE WAY!!! XD
Ugh.... I had forgotten how heavy CRTs were. 😬
I was trying to build some small computers with a mini-itx for work stations and I was surprised that cases that were small required a special power supply (sold seperately) and I would see lots of comments of those power supplies failing so I ended up building hybrids, they were cubed shaped cases, not as compact as I wanted but it did the job.
The Horizontal case took up a lot space on the desk. I welcomed the tower cases when they first came out 😊
Considering our offices across the globe has tens of thousands of PCs that are not towers but horizontal, I'd say it's not that hard to find them. They are just oriented at a office environment. SFF (Small Form Factor) were quite common not that long ago and while you can easily get an SFF modern PC, they are leaning towards the DM (Desktop Mini) form factor. Take for example the HP Elitedesk 800 or 600 series PCs. They come in DM, SFF and tower formats. Though if you ask me, even the tower is more of a horizontal chassis just propped up sideways (all the USB ports would be sideways from what you'd be used to)