if you watched the video you will hear I plug it in to computer and it does nothing since update, I have download various drivers but it will not work on my Mac, shame and time wasteful
Plug it in, I'd never trust the wireless connection, but it looks like your not connected to it at all, you probably need to bind it though the phones connection first, you could have bricked it the last time you flashed it if it lost signal while flashing which means there is no mapping to the ports in the mpu, could I've got a text or notification during the flash that messed it up, thats why I'd never never use wireless connection other then maybe out in the field for a quick adjustment. But connected it's like 99% of every other flight controller with a cable, and try reflashing it. If it won't reflash via usb, then you might not have the correct drivers, run the impulse rc driver fixer, may have to reboot, if you actually bricked it so that it doesn't have the usb set up then you will need to load the firmware though a uart with a ftdi adapter. I dont use that rotten apple stuff, id recommend using a PC, so i cannot help you any more then that ...
And as for why using 4.3, I would guess that's just because that was what they used when they came out with that cuz it was the most reliable, that info probably just hasn't been updated, cuz they make lots of stuff and these get updated every few months....
@freeflightfilms7403 i don't actually have experience with that specific $47 hakrc actual stack, i just got 2 of them yesterday from skystars, i usually use 32bit and f7, but everything I've had from hakrc the past few years has been great, so I'm hoping these are also!
why not flash the latest version (4.5.1)? and maybe use a wired connection to the betaflight app on a PC.
I already have updated it to the lates but no work with OSX, what a shame and goodbye shite software from speedy bee
if you watched the video you will hear I plug it in to computer and it does nothing since update, I have download various drivers but it will not work on my Mac, shame and time wasteful
done that but won't connect, speedybee will not update and brick
Plug it in, I'd never trust the wireless connection, but it looks like your not connected to it at all, you probably need to bind it though the phones connection first, you could have bricked it the last time you flashed it if it lost signal while flashing which means there is no mapping to the ports in the mpu, could I've got a text or notification during the flash that messed it up, thats why I'd never never use wireless connection other then maybe out in the field for a quick adjustment. But connected it's like 99% of every other flight controller with a cable, and try reflashing it. If it won't reflash via usb, then you might not have the correct drivers, run the impulse rc driver fixer, may have to reboot, if you actually bricked it so that it doesn't have the usb set up then you will need to load the firmware though a uart with a ftdi adapter. I dont use that rotten apple stuff, id recommend using a PC, so i cannot help you any more then that ...
And as for why using 4.3, I would guess that's just because that was what they used when they came out with that cuz it was the most reliable, that info probably just hasn't been updated, cuz they make lots of stuff and these get updated every few months....
Ha dont you think Ive tried, it just nothing now on my Mac after update, tried silicon driver etc but nothing its f...cked
@freeflightfilms7403 i don't actually have experience with that specific $47 hakrc actual stack, i just got 2 of them yesterday from skystars, i usually use 32bit and f7, but everything I've had from hakrc the past few years has been great, so I'm hoping these are also!
It won’t connect to laptop any more after update and Speedybee recommended version from 2022