Hello. I was also thinking about the K100 brushless version, but I couldn't find a suitable ESC .I don't have the budget to buy several types and try them out ※I want to use the brushless motor without modification
@@RC_Heli_chan My K100 brushless using ESC CICADA BLHELI_S 7A, Beemotor 1103 (have to rewind to 15000KV), but It's not the best solution in my opinion, still finding a new ESC 🤣
@@rchelicopterspace_0309 Thank you for your advice. I ordered the same ESC two days ago. Looks like we're walking the same path. I think I'll try changing the gear ratio instead of re-winding the motor. I think it would be great if it could be made in a way that the general public can imitate. Generally, I think that the power of coreless motor plus alpha is sufficient
@@RC_Heli_chan This esc has a problem, that is, with a motor with 12 magnets like the beemotor1103, it needs a slow start from low to high and vice versa, so if you are in high throttle mode, you suddenly stop the throttle. will create a very rapid shutdown of both the main and tail motors. I always have to keep this in mind when flying it, when I'm at high throttle to fly 3D, I always switch back to linear throttle mode, land and pull the throttle slowly to low throttle, and then flick the stick.😅
@@rchelicopterspace_0309 Thank you for valuable information. Actually, the 7A ESC I ordered was canceled because it was out of stock. Maybe I was lucky it got canceled. I knew that it would be difficult to get the 12P brushless motor to rotate at high speeds. The question is how to solve that problem.
いつも楽しく拝見させて頂いています。
XK110関連の動画ではとても勉強になるところも有り参考になっています。
もし、宜しかったら依頼動画をお願いしたいのですが・・・・・
XK110の受信機でエルロン、エレベーター、ピッチのサーボのうち1箇所だけが正常な動きをして、2箇所のサーボは動きが正常ではありません。試しに動きが正常でないサーボを正常なコネクターに差し込むと正常に動きます。できれば、こういった不具合の有る受信機の修理等の動画をアップして頂けないでしょうか。宜しくお願いします。
こんにちは。
K110の受信機ボードの不都合で修理した経験があるのは、全く動かないという物です。
それはクリスタルの交換で直ったのですが、二つのサーボが正常に動かないというのは
経験がありません。可能であれば、動画で作動状況をアップしていただけると故障個所の
予想がつくかもしれませんが、その場合はプロ並みのIC交換スキルが必要だと思います。
それが出来る方もいるので、故障した受信機ボードはジャンク品としてフリマで売って、新しいのを買う
のが一番安くつくと思います。交換用の道具をそろえるのは費用が掛かりすぎます。
@@RC_Heli_chan様。こんばんは。
早々のご返信有り難うございます。🙇
やっぱり2箇所のサーボの動きが変だということは受信機の不具合ですよね。修理を頼んだら高額になりそうですね。😅
ジャンク品としてフリマ等に出品した方が良いかもですね😂
ご指導有り難うございました。
ジャンク品を直すのが好きな人は多いと思いますので
捨てないでフリマで売るのがベストです。
Hello, thank you for the video. The original k100 motor burns quickly in general, if you have a brushless solution that would be great 🥰👍
Hello
I'm wondering if it's possible to easily replace it with a brushless motor. Power is equivalent to a coreless motor
I have a K100 convert to brushless motor 😄
ua-cam.com/video/an9nkBoOtQk/v-deo.html
With rx K100, we can convert it to brushless motor for more durable 😄
Hello.
I was also thinking about the K100 brushless version, but I couldn't find a suitable ESC
.I don't have the budget to buy several types and try them out
※I want to use the brushless motor without modification
@@RC_Heli_chan My K100 brushless using ESC CICADA BLHELI_S 7A, Beemotor 1103 (have to rewind to 15000KV), but It's not the best solution in my opinion, still finding a new ESC 🤣
@@rchelicopterspace_0309 Thank you for your advice.
I ordered the same ESC two days ago. Looks like we're walking the same path.
I think I'll try changing the gear ratio instead of re-winding the motor. I think it would be great if it could be made in a way that the general public can imitate.
Generally, I think that the power of coreless motor plus alpha is sufficient
@@RC_Heli_chan This esc has a problem, that is, with a motor with 12 magnets like the beemotor1103, it needs a slow start from low to high and vice versa, so if you are in high throttle mode, you suddenly stop the throttle. will create a very rapid shutdown of both the main and tail motors. I always have to keep this in mind when flying it, when I'm at high throttle to fly 3D, I always switch back to linear throttle mode, land and pull the throttle slowly to low throttle, and then flick the stick.😅
@@rchelicopterspace_0309 Thank you for valuable information.
Actually, the 7A ESC I ordered was canceled because it was out of stock. Maybe I was lucky it got canceled.
I knew that it would be difficult to get the 12P brushless motor to rotate at high speeds. The question is how to solve that problem.