Hi, todays date is 2/29/23. I want to personally thank you for this Great Video!! My windows XP became “non supported” and I had to buy a larger laptop. I was not able to use my printer and I was told, my printer was garbage. I purchased another printer (HP) only to find out I needed to buy a subscription for the ink.. After two months of trying to make my P1102 work and of course failing, I see your video.. Long story short, My Printer is working!! Thank you so much! You are a great Teacher and I will be your New Subscriber ❤
No software down load or CD is needed to install the drivers With HP Smart Install when the USB is first connected the printer is recognized as a virtual cd drive. This provides the driver to do the install and will set the WiFi IP to work on a network router. The HP Smart Install allows you to install the product driver and software by connecting the product to a computer through a USB cable. If the product previously has been installed on a network, reset the wireless defaults. See Restore default wireless settings. NOTE: The installation CD is not required during a HP Smart Install. Do not insert the software installation CD into the computer CD drive. 1. Turn on the product, and then connect the USB cable to the product and the computer. The installation program should start automatically. Connecting the USB cable ● If the HP Smart Install program does not start automatically, AutoPlay might be disabled on the computer. Browse the computer and double-click the HP Smart Install drive to run the program. If you cannot find the HP Smart Install drive, use the product installation CD to install the software. ● If the program prompts you to select a connection type, select the connection type you will use to print to the product after installation. 2. Follow the onscreen instructions to complete the product installation. 3. When the installation is complete, if you want to verify that the product has a network IP address, print a configuration page. Press and hold the product cancel button until the ready light blinks, and then release the button to print the configuration page.
Hi, todays date is 2/29/23. I want to personally thank you for this Great Video!! My windows XP became “non supported” and I had to buy a larger laptop. I was not able to use my printer and I was told, my printer was garbage. I purchased another printer (HP) only to find out I needed to buy a subscription for the ink.. After two months of trying to make my P1102 work and of course failing, I see your video.. Long story short, My Printer is working!! Thank you so much! You are a great Teacher and I will be your New Subscriber ❤
Thanks For Watch My Video Don't Forget to like and share this video :)
Practically step by step instructions
Very good informative video to teach you step by step how to install the driver. Thanks
Glad it was helpful!
Thank you sir video aachi thi aur instructions bhi sahi tha
Thanks For Watch My Video Don't Forget to like and share this video :)
Thank you sir ❤
Thanks For Watch My Video Don't Forget to like and share this video :)
Thank you very much for your help
You are welcome
Thanks for the video!! very helpful
Glad it was helpful!
NOTHING I have tried so far has worked and I've tried EVERYTHING. I hate HP and their shit.
wow
thats funny
It worked! Thank you. 😀
Glad it helped!
Thanks Sir
Thanks For Watch My Video Don't Forget to like and share this video :)
No software down load or CD is needed to install the drivers
With HP Smart Install when the USB is first connected the printer is recognized as a virtual cd drive. This provides the driver to do the install and will set the WiFi IP to work on a network router.
The HP Smart Install allows you to install the product driver and software by connecting the product to a computer through a USB cable. If the product previously has been installed on a network, reset the wireless defaults. See Restore default wireless settings.
NOTE: The installation CD is not required during a HP Smart Install. Do not insert the software installation CD into the computer CD drive.
1. Turn on the product, and then connect the USB cable to the product and the computer. The installation program should start automatically.
Connecting the USB cable
● If the HP Smart Install program does not start automatically, AutoPlay might be disabled on the computer. Browse the computer and double-click the HP Smart Install drive to run the program. If you cannot find the HP Smart Install drive, use the product installation CD to install the software.
● If the program prompts you to select a connection type, select the connection type you will use to print to the product after installation.
2. Follow the onscreen instructions to complete the product installation.
3. When the installation is complete, if you want to verify that the product has a network IP address, print a configuration page. Press and hold the product cancel button until the ready light blinks, and then release the button to print the configuration page.
Very polite
Thanks For Watch My Video Don't Forget to like and share this video :)
عايز ه اثبت تعريف الطابعه 1102w لويندوز 7 بت32
i didnt get the animated getting started guide. why?
Ditto just comes up with can't delete output file
I did not unbox it.