I'd like to see the dispenser design so I can copy it. Guessing an array of rollers inside 2 valleys, or just a few wheels with bearings in them with valleys for the wire..
Nop... my gear head actually ride on a large custom brass bushing "Wet oil bushing" that lubricate the entire crown "Gear" and obviously, the large spool or "Cartridge" ride on some metal rolling mini spools!
It looks a lot like a Universal I used to have. I think Universal was sold to another company but I don't know who bought them. They were located in N.J. if I remember correctly.
1 wheel for loading wire locked 1 way another way freely. another wheel be carry wire to winding to core.i think so.so sometime we see to wheels different speed with each other.
Nice demo but it seems like a strange way to wind a multi-layer coil. I guess it's OK for low frequencies but the way he is overlapping turns which are electrically "far away" from each other (in terms of the voltage drop) will unnecessarily increase the parasitic capacitance. I thought that multilayer coils were usually basket-weave wound or bank wound. Essentially you build-up all of the layers at once instead of completing one and then making the next one on top of it.
Hello I am from Iraq and I work in the field of hardware crane because the power supply in my country is irregular and I would like to buy a winding machine like this please help me where I can get it and how much the price and I would be thankful for you regards
Hola, Me llamo Mikołaj Jaroszewicz y trabajo para la compañía noticiera, NTD Television (Epoch Media Group). Vimos este siguiente video y nos encantó: ua-cam.com/video/oBdJvT7tpSM/v-deo.html Nuestra misión es inspirar a nuestra audiencia mundial e impartir Verdad, Esperanza y Humanidad. Nos gustaría publicar su video en nuestras páginas de medios sociales y nos gustaría que nos contacte para darle más detalles. Por favor, envíenme un correo electrónico a mikolaj.jaroszewicz@epochtimes.nyc Gracias. Este es nuestro sitio web: www.epochmediagroup.com
winding wire is wound ( loaded ) on circumferance of spinnig wheel as per requiredment ( first clockwise rotation ) and unwind ( unloaded ) on CT ( second anticlockwise rotation ).
I'm not sure what else you were expecting. this machine winds a could. The video shows an operator winding a coil. after apply a insulating layer to protect the coil against damage and that is it really.
Yes, but is there a machine that can make a Rodin Coil? The Rodin Coil is similar to a Toroid, except the wire is wrapped at an angle, 30 degrees short of directly across the ring. This design minimizes the random collision of electrons, as well as heat. P.S. Torus Ring, refers to the standard shape of a Torus. A Toroid, is a solenoid in the shape of a Torus Ring.
Rhodin Coils rely heavily on pixie dust and Unicorn farts, (in the correct proportions of course),... Torus Ring defines a "donut" shape, and a Toroidal coil is in the shape of a Toroid, Torus, or for pesants, a Donut.
such innovations for the future generations, truly 🙌 God bless all those behind it
Cool design for bigger inner diameter of the core, well demonstrated thanks.
i was very excited to see the winding of the second layer, best demostration video.
This is one of the most amazing things that I have ever seen!
Fascinating!
Whoever came up with this machine is a genius
ㅣㅣㅣ
L
Can someone explain to me a couple uses of such a Ferrite Core Heavy gauge toroid inductor?
@@flaplaya emi filter for high current scr phase control?
@@Sydney268 Great example of use!
More please..
코일감는방법이궁금했는데이제 알게되었네요. . 감사합니다
I like your work ,nice job,good quality video.
Nice to know, I have always wondered how coils like this are made.
Magnífica... Parabéns...
Прикольно! У нас подобные станки в обмоточном цехе были. ;-))
Great machine Great people. Unable to imagine.
Incrível, bela máquina. Parabéns!
this is a beautiful thing
WoW you make it look so easy
What is the smallest inside diameter of the toroid to be wound?
hi Carlos, what's your winding machines name or brand and toroidal core coating is good how to making this? pls can you answer.
so it will take forever to wind one toroid?
Hi please show me how is placed the toroid thank!
Looks like a Jovil coil winder??
Where is the wire supply reel?
Thank you for Sharing The video 👍👍
do you own this machine? did u wanna sale that one? or how can i purchase that machine?
hola carlos donde puedo conseguir esa maquina?
Mantap/good 👍
I want one of those machines and what he price of it
D+!
merci our cette video
Good tools .
It was funny when Mr Garrison rode that machine on South Park. Still better than Airplane travel.
very good
I want one of those machines. 😎
yes me too just to play with it, I have no use for toroidal transformers
Sure beats the way I’ve done them! ⏳
Thanks for kind information it help where to find supplier of machine and parts
А а а а обалдеть.
Show!!!!!
Boa Tarde , aonde posso adquirir esta maquina !!
Masion kaha milta hai or r.s kitna hai
Hello, how much is price, thanks.
Good..keren
நல்ல கண்டுபிடிப்பு !
I'd like to see the dispenser design so I can copy it. Guessing an array of rollers inside 2 valleys, or just a few wheels with bearings in them with valleys for the wire..
Nop... my gear head actually ride on a large custom brass bushing "Wet oil bushing" that lubricate the entire crown "Gear" and obviously, the large spool or "Cartridge" ride on some metal rolling mini spools!
how much is the price of the toroid winding machine, sir, can you order it or not
السلام عليكم
انا من العراق محتاج هكذا ماكنه اشلون احصل عليها
Nice, wonder what a machine like that would cost to buy ?
What price
hola me gustaria informacion sobre la maquina y si la puedo adquirir? agradeceria mucho que me respondiera gracias.
Para que sirve esa máquina pira curiosidad? Jsjsjsjs
Qual o valor de uma máquina dessa ?
How much a machine these ?
Informacion donde se puede adquirir por favor
Muito bom, mas quem vende? Qual valor no brasil?
Bary good isthebes fuel man
Beaultiful! what brand is this machine?
It looks a lot like a Universal I used to have. I think Universal was sold to another company but I don't know who bought them. They were located in N.J. if I remember correctly.
ye machine kharidni hai mujhe khn se mile ga
Good
Hello ye mashin kitne ki hain
Boa noite amigo essa máquina de bombina deira é você que fabrica
How much for this type of machine
من اينه احصل على هذي الماكنه
Sebastião Costa .de Ribeirão das Neves mg.gostei.
two wheels spinning at different speeds?
1 wheel for loading wire locked 1 way another way freely. another wheel be carry wire to winding to core.i think so.so sometime we see to wheels different speed with each other.
Nice demo but it seems like a strange way to wind a multi-layer coil. I guess it's OK for low frequencies but the way he is overlapping turns which are electrically "far away" from each other (in terms of the voltage drop) will unnecessarily increase the parasitic capacitance. I thought that multilayer coils were usually basket-weave wound or bank wound. Essentially you build-up all of the layers at once instead of completing one and then making the next one on top of it.
Cuanto cuesta una de esas maquinas de boninar toroides
Price
Mere ko 15 amp 220 volt ka dimmer rewind karwana hai address btaye
Wire gauge
Hello I am from Iraq and I work in the field of hardware crane because the power supply in my country is irregular and I would like to buy a winding machine like this please help me where I can get it and how much the price and I would be thankful for you regards
still Lot of handwork
How much price Sir this machine...
А между слоями тефлоновую ленту или спец.бумагу не надо?
И так сойдет (С)
It is wonderful, could you please help us buy one such machine.
i have 5 years old but like now
Price Kitna
I'm in love with a machine..... LOL
Do you know where to buy this machine?
@@davepham5844 Not the least idea. Is so specialized. Just admire the technical aspects.
plz rply
Price plz?
55 -0-55 transformer price
Cual es su precio
3:31 Adding the rated break point :'(
LOL
Good spotting.
I would have missed what was occurring there.
No need for that wiggle whatsoever other than built in obsolescence
Price ka hai
Hola,
Me llamo Mikołaj Jaroszewicz y trabajo para la compañía noticiera, NTD Television (Epoch Media Group).
Vimos este siguiente video y nos encantó:
ua-cam.com/video/oBdJvT7tpSM/v-deo.html
Nuestra misión es inspirar a nuestra audiencia mundial e impartir Verdad, Esperanza y Humanidad.
Nos gustaría publicar su video en nuestras páginas de medios sociales y nos gustaría que nos contacte para darle más detalles. Por favor, envíenme un correo electrónico a mikolaj.jaroszewicz@epochtimes.nyc
Gracias.
Este es nuestro sitio web: www.epochmediagroup.com
Bhai ap ka naidea
Where's the bl00dy wire feeder????
winding wire is wound ( loaded ) on circumferance of spinnig wheel as per requiredment ( first clockwise rotation ) and unwind ( unloaded ) on CT ( second anticlockwise rotation ).
Its BD Prise
سلآم عليكم هذي الماكنه ماتبيعون منها
ভাই এই মেসিন গুলো কোথায় পাবো আমি একটা মেসিন কিন্তে চাই জানাবেন৷৷
😃🇹🇷🇹🇷
я вижу они на медь не скупятся концы по пол метра оставляют)
I want one
7:00 : )
Prices in Bangladesh
মেশিনের দাম কত
Harganya berapa
3:32 что это было!?
sloooooow work....
Pity he didn't actually show the piece after it was finished. Instead he just cut the wire and that was it.
I'm not sure what else you were expecting. this machine winds a could. The video shows an operator winding a coil. after apply a insulating layer to protect the coil against damage and that is it really.
Такое чувство что он первый раз это делает
Yes, but is there a machine that can make a Rodin Coil?
The Rodin Coil is similar to a Toroid, except the wire is wrapped at an angle, 30 degrees short of directly across the ring. This design minimizes the random collision of electrons, as well as heat.
P.S.
Torus Ring, refers to the standard shape of a Torus.
A Toroid, is a solenoid in the shape of a Torus Ring.
There is no idea in winding in an angle, other than a longer winding, and more losses in the coil.
Rhodin Coils rely heavily on pixie dust and Unicorn farts, (in the correct proportions of course),... Torus Ring defines a "donut" shape, and a Toroidal coil is in the shape of a Toroid, Torus, or for pesants, a Donut.
Ok booos
Kisi ko machine leni hai to mujhe se baat karo mai janta hu machine me bare me
Sar image photo dancer mitu's UBI bolun