Ducati Scrambler fuel tank removal
Вставка
- Опубліковано 28 вер 2024
- Removing the Scrambler tank seams to be an easy task, and it is if you follow the right steps, so here is a step by step video on how to remove the Ducati Scrambler tank.
I hope you guys enjoy and thanks for watching.
JOIN ME ON PATREON: / albesadv
SUPPORT THE CHANNEL: www.paypal.com...
All the parts I get on Amazon in one convenient place: www.amazon.com...
Subscribe for more / albesadv
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
IN THIS VIDEO:
Motion Pro T handle wrench: amzn.to/3v2hP58
DUCATI SCRAMBLER ACCESSORIES: albesadv.com/sc...
MY GEAR: albesadv.com/gear/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you live in Socal have an ADV/DualSport bike join my FB group and let's go ride together.
www.facebook.c...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For more check out my site
www.albesadv.com
GET YOUR ALBE'S ADV SHIRT: teespring.com/...
IF YOU LIKE THE ALTRIDER SHIRT: amzn.to/2ET2toN
I BUY MOST OF THE O.E.M. PARTS FROM BIKE BANDIT www.pjtra.com/t...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
BMW F800GS ACCESSORIES: albesadv.com/bm...
MY GEAR: albesadv.com/gear/
CAMERA GEAR: albesadv.com/gear/
DUCATI SCRAMBLER ACCESSORIES: albesadv.com/sc...
APRILIA TUONO V4 1100RR ACCESSORIES:
EVOTECH front and rear axle slider: ebay.to/2L4eM5K
EVOTECH frame sliders: ebay.to/2wIIdHl
Tinted windscreen NOT OEM: ebay.to/2x8snG5
Tank Pad: amzn.to/2IWm2PS
Brake reservoir sock: ebay.to/2xcUxjm
PMP 2.0: www.af1racing.c...
YAMAHA YZ426F PARTS & ACCESSORIES:
Trail Tech Vapor Stealth: amzn.to/2JQ0qHC
TWIN AIR dual foam filter: amzn.to/2ECFUar
ALL Balls Carburetor Repair Kit: amzn.to/30CHwu3
HELIX Clear Blue 1/8" Polyurethane Vent: amzn.to/2QgLSCl
UFO frame guards: amzn.to/2GtAEHL
YZ426F spark plug: amzn.to/2HZ8dDN
ProTaper Contour Handlebars: amzn.to/2QMmjg5
Cycra handguards: amzn.to/2R8sDh6
Barkbusters handguards: amzn.to/2UZACw7
Generic brand Handguards: amzn.to/2R3eC4r
Blue Grips: amzn.to/2Lv5mR3
Yamalube 20W-50 1Gallon: amzn.to/2F6wiFY
Yamalube 20W-50 1Quart: amzn.to/2BVixXe
Oil Filter: amzn.to/2CLYkVE
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
follow me here:
FACEBOOK LINK
/ albes-adv-163688985325...
TWITTER LINK
/ albesadv
INSTAGRAM LINK
/ albesadv
PATREON
/ albesadv
FAN MAIL TO:
Albe's ADV
P.O.Box 7571
Riverside CA 92503
#motorcycles #albesmaintenance #albesadv
------------------------------
MUSIC: Epidemic Sounds: www.epidemicso...
I'M NOT A MOTORCYCLE MECHANIC NOR AN ADVENTURE RIDING INSTRUCTOR, TAKE EVERYTHING I SAY WITH A GRAIN OF SALT, I'M JUST AN ENTHUSIAST SO DOUBLE CHECK YOUR OWNER'S MANUAL FOR THE CORRECT PROCEDURES AND SPECIFICATIONS.
EMULATE AT YOUR OWN RISK.
Thank you for always posting the best videos champ 🙏🏽
Great video. Very helpful for my tank removal. Went smooth thanks to you.
great help for me ! I like the italian accent , greetings from the dominican republic
Thank you 😀 👍
Thanks mate , had remove the tank on my bike , glad I watched your video first !
Keep going with the scrambler! It’s so good!
It was very complicated?! Italian engineers makers have a different way to think like Germany's one. By other side, my Scrambler is full of emotion like Latin's peoples are?! Tks for the video. Forza!
Thank you. Very helpful. Good video and good close ups with good lighting and a steady camera. Well done! Now, can we track down the Ducati designers that made the tank a PITA to remove?
LOLOLOLOL, if you track them down tell them to call me and I'll give them a piece of my mind in Italian. I swear much better in Italian than English 😂😂
Brother thank you so much! I´m planning to paint the tank and this is extremely helpful. Appreciate.
No problem Roberto 👍
hello, albe, one question, that may can answer. the tank offers two connections, one for the overflow and another for vent. ccould you help and tell me, which one (left, right) should connect to the overflow and which to the vent line? thanks in advance.
Hi, it's hard to say without looking at it, on mine each line came from a different side of the bike but right now I can't remember which one is which, try to follow them and see where they go, the overflow should go to the bottom of the bike while the vent SHOULD go to the charcoal canister
@@AlbesADV thanks a lot.
Great video! Learned a lot.
Great video! Thank you, it helped me a lot!
Thank you for watching Steffen.
Excellent vids man. cheers
Thanks
Great, thank you
Thank you!
Greetings, I own a Ducati Scrambler. My motorcycle leaks gas when I start it in cold weather in the morning. What do you think is the reason? Plss help me.
Check the fuel lines and that plastic elbow that connects to the tank
@@AlbesADV thank you. 🙏
It's ok
Thanks man !!
Hi, great videos, thank you.
Could you tell me if I remove the exhaust baffle/muffler will I damage the engine?
Removing the muffler will not damage the engine, but the bike will not run right and that not running right will eventually have adverse effects on your engine. If you mean baffle as DB killer, then no you will be fine, most likely, you won't even need a tune.
@@AlbesADV thank you. I'll have to Google dB killer ha
Is the scrambler still in operation?
Ducati maintenance in Korea is very expensive and parts are difficult to supply. What parts have you replaced while operating the scrambler? I want to pre-order parts.
It is.
Just the consumable parts, filters, oil etc.
i hv ducati scrambler base model .I HAD STARTED MY BIKE AFTR FOUR MONTH AND FACING SOME PROBLEM WHILE IDLE SPEED....Whn i starts my bike then Rpm getting down and bike getting off so pls SUGGEST what SHOULD i do for idling speed...
If the bike was working fine 4 months ago, the problem is something that happened when the bike wasn’t used. The very first thing I would do in empty the fuel tank and put in fresh new fuel, if that doesn’t work, next step would be to clean the injector and the spark plugs, start from the easy things and work your way to the more difficult, good luck 👍
Hey Albe, I'm replacing my tank with a different one. What kind of glue should I use when I swap the fuel pump over to the new tank?
Hi Stacey, I’m not quite sure, but one thing I know is that if it requires glue, Ducati will have a special one to use, sorry for not being much help on this one.
Okay no worries. Thanks for the videos!
Hope I never have to remove the tank.
I officially really am a fan! you’re awesome thanks for taking the time to educate us fellow ducati riders
Not a problem Mark, thank you for watching 😀👍
Thank you for this video man!! This helps me a lot!
Great video thanks. I struggled with the fuel line connectors, but here's a great tip that worked for me and made it SO easy...
I used an open ended spanner that was wider than the fuel line, but small enough that the head of the spanner was touching most of the 'collar'. I then just levered it gently (against the elbow/fuel line) to apply upwards pressure to the collar and hey presto, the combination of effectively pushing up & down at the same time caused it to just pop straight out. Tried it again on the other connector and it worked perfectly
Well done 😀👍
Fantastic video my friend. I swear you could make a channel where you just build Legos and I would watch every video.
Also - the scrambler is such a beautiful bike.
Thanks man, that it is and so versatile
Thanks for simple vdo.
It seems so easy😮
Love the scrambler series!
That's the best description I've seen - Great job.
I enjoyed watching your vlogs thing is I don't even own a Ducati.😀
And I really appreciate 😀👍
Today I bought a Ducati Scrambler Sixty2 after watching your Scrambler maintenance vlogs, thanks for pointing me in the right direction.👍@@AlbesADV
@leeandjancruise thank you for watching 😀👍
Great video (although I am not taking my tank off! Good to know so can run wires underneath to the handlebar).
You're the man. Thank you. I can finally repaint my tank 🍻
Glad to help 👍
Hi Albe and thanks for the video!
As you show in the video there are 2 different fuel line, is important to remember which one we have to plug on the left and the one on the right? thanks in advance
Hi Daniele, It's only important because there is not much room under the tank and if you cross them, the tank might not sit properly, also the lines are pretty short
That was exceptionally helpful - thanks mate!
Subscribed, these little tricks will come in handy
thanks for the video ... I had to lift my tank to fit an air intake kit
Thanks for this. Exactly what I was looking for.
Rewatch value A+ :) thank you
Thank Bro.
Hi Albe, thanks for posting this video. It’s a great help.
I bought a used fuel tank but it doesn’t have the collar clips for the fuel injector hoses, as mentioned in your video (around 9 mins) its possible to secure it with cable ties instead. Do I simply run the cable tie through the holes on the collar and over the L elbows? Much thanks
Hi, it might hold but I wouldn't recommend it, any mistake and if the lock valve fails, you will end up having fuel leaking on top of a hot engine. I understand in a pinch you have to do what you have to do, just be careful
Very cool !
Thank You.
Great job explaining it👍
Good man ❤️
Oh Man, you saved my life. Mostly. As expected (you warned in your video, that they break easily), i broke one of the two l-shaped tubes, that run into the fuel pump. You mentioned, that they are cheap replacements. But, where could i order them? Do you have a part number available for these tube ends? That would be highly appreciated.
Hi, unfortunately I don't, I went to the Ducati dealer and told them "I need the L shaped thingy between the fuel pump and the hose. I bought 2 by the way, just in case.
@@AlbesADV Thanks a lot for your instant answer. Have been a the dealership today as recommended. And they will order them for me. And as you said - just a few bucks :)
And just found out - you made another video that will make my life much easier (changing the rizoma handlebar and relocating the speedo). Big thanks!
No problem man, I'm glad it helped 😀 👍
Great vidéo, thanks a lot for your clear tutorial
Thank you for watching Thomas
Hi Albe,
Excellent video…
Just a question:
Need to replace my right front Tuning LED Index light on a Desert Sled 2019.
To access the connectors box I need to go underneath the fuel tank.
Do I need to remove it completely or will it be sufficient to lift it with the wooden tool you used :-)
Thanks for your answer
Goran
Hi Goran, if the desert sled is the same as the classic, you should be able to do it by lifting the tank using the “super-sophisticated wooden tool” 😆👍
@@AlbesADV
Great …. With my slim handshape it hopefully works haha…
I‘m going to cut that tool out of a tree 😅
Many thanks and all the best
Hi Albe,
Just wanted to let you know that I was able to change the front index light with the fantastic tool you showed 😅😅
The cable routing of the Desert Sled is really tight and there wasn’t a lot of room. Finally - with a second pair of helping hands from a friend I lifted the tank and he was able to catch the right cable ..
Next time perhaps will check how difficult it is to remove the tank …
All the best and always good ride
Goran
I’m glad you were able to do it, 😀👍
One of your best ... Thanks
Thank you 👍
Is there any other connectors ? I was pushing on mine and the lines did not move one bit
No, those are the only connections under the tank
Glad you're not a gynaecologist!
Lol, so are the hundreds of possible patients 🤣🤣
Hi! What is brand of used t-socket spanner?!
Motion pro
You saved the day mate
Glad to help 😀
I wish I saw this 5 years ago lol. I’ve built many custom scramblers and broke the first two. Great video 👍
Thanks man, if you post pictures of your builts on Instagram tag me, I always enjoy looking at cool scramblers
@@AlbesADV hey Albe. Are the over flow and breather lines left and right? Or they are both just straight out hoses? I can’t remember which one is which
Sincerely I don't remember, on mine the hoses came up from different sides of the engine and couldn't be misplaced without obviously crossing them, I hope this helps
How do you remove the air box?
ua-cam.com/video/r8OxRROybNI/v-deo.html
this video might help
Bravo!🙏
Grazie!!!
Where is the fuel filter located? Do you have to remove the tank to access the fuel filter?
Hi, the only filter is the fuel pump filter which is directly attached to the fuel pump inside the tank, the only way to get to it is to remove the tank and the fuel pump assembly
@@AlbesADV Thanks. Too bad it's so hard to get to. I think my son's bike (which he just bought) that had sat for most of the past two years is experiencing fuel issues, and my first thought was change the fuel filter. Looks like something for a tech to handle, tho. Oh, well. Nothing's simple anymore.
So true, good luck 👍
@@AlbesADV Thanks.
Albe do you have a recommendation to open a stuck gas cap lock on the scrambler. I've been away during lockdown for 8 months and cannot get the key to turn no matter how much I try. Also i was advised to push down near the front of the cap as there could be a pressure pushing up causing the problem. Any recommendation is welcome!
Brent, spray some wd40 into the key hole, let it be for a minute then press the gas cap and turn the key, let me know if this helps
Just got an Urban Enduro. This video will come in handy one day. Thanks 😁
Thanks Roy
Спасибо
Albe, I need your help! I have snapped the two back bolts (seat side). Any idea how best to remove these so I can replace them?
Also my Ducati is a 2018 icon and the bolts also have nuts underneath which I believe I’ll have to remove the battery to get to.
Oh no! However you look at it is going to be a giant pain. How far down did they break, any portion of sticking out? There shouldn't be nuts at the bottom at least not removable ones. There are a few techniques to remove snapped bolts it all depends on how much remaining bolt you have access to and it's hard to explain over a message
@@AlbesADV there’s a few CM to play with underneath but even with the battery out everything is getting in the way 🤦♂️ and yes my mistake there are no nuts. I’ve tried a few things I’ve seen on UA-cam but I’ve just ruined the shape of the bolt now lol
Can you get to it with a dremell or a drill? Maybe you can drill a hole thru it and try to jam something in it and screw it out
Thank you for excellent video tutorial. Is there a way to drain the tank without removing it? Can the two fuel lines be disconnected from where they deliver the petrol, I am guessing the injectors?
They can but I believe to get to them you have to remove the fuel tank, you are better off siphoning the fuel from the filler cap
@@AlbesADV Thanks for the swift reply. 👍 I filled my cafe racer with diesel last week 🤯 and paid £120 to watch some kid simply suck the diesel out into a tank in his van that he will sell on. That was it. He didn't even put some injection cleaner in to flush the diesel through the system, just left me to refill it with petrol. I was not familiar with the under tank connections, but if I am stupid enough to ever do that again, I will - as you suggest - simply buy a hose and siphon it out.
I was surprised at the location of the fuel lines/fuel pump in your video......I thought Ducati would have put these towards the back of the tank where the fuel tank lowest point is, but they are in the middle.
Love the Tuono, btw.
Would have been worse if you put regular gasoline in a diesel machine.
Definitely a siphon will be cheaper than £120. Thanks for watching my videos 👍
remove the tank for spray painting?
Want to know the brand of handguard?
??? Not sure if those are statements or questions, they sound like statements but have a question mark 🤔
Please 🙏🏻 Which is the name of the brand of the handsavers?
Out Ex from JP?
Yes OutEx from Japan, if you scroll down in the description there should be a link 👍
OutEx from Japan 😀👍