Best ZOOM SETTINGS for LIVE MUSIC | UAD + DAW
Вставка
- Опубліковано 17 жов 2024
- Best Zoom Settings for Live Music performance using Universal Audio, Logic Pro X, and BlackHole. Make your Zoom concerts sound awesome!
Download BlackHole:existential.au...
Mentioned videos:
How to LIVE STREAM with UAD: • How to LIVE STREAM wit...
How to Live Stream DAW: • How to Live Stream DAW...
BenQ ScreenBar Plus: amzn.to/3qkZSeW
My Studio Gear!
My main interface, UA Apollo x8: amzn.to/362Juc8
Secondary interface, UA Arrow: amzn.to/301FLrJ
UA Satellite: amzn.to/3iZLOEn
Awesome preamp, Neve 1073 SPX: amzn.to/305q42J
Favorite mic, Neumann TLM102: amzn.to/32UCegs
AKG C214: amzn.to/30kj0zt
Shure SM57: amzn.to/3j105AI
Fav budget monitors, Kali Audio LP-6: amzn.to/3kGfgzQ
Yamaha NS-10 (of course) with Crown XLi 1500 amp: amzn.to/2FSYpuM
My favorite headphones: amzn.to/3iWw456
Akai MPK261 MIDI Keyboard: amzn.to/3hWF0WQ
Monitor Controller: amzn.to/3cr1mP7
Computer, 16" MacBook Pro: amzn.to/3cs7Zkj
OWC Thunderbolt 3 Dock: amzn.to/33SXx1o
Dell 4K Display: amzn.to/2G5jwd2
Fav SSD Hard Drive: amzn.to/368076x
Best Thunderbolt 3 cables: amzn.to/365YtCb
TRS Patch Bay: amzn.to/3iYO8vA
XLR Patch Bay: amzn.to/3kJGWny
Colored TRS cables: amzn.to/35YlyXv
XLR Male to TRS: amzn.to/36f6OUr
XLR Female to TRS: amzn.to/3iYGyAX
Rack-mounted drawers: amzn.to/2Er2fur
1U Blank Rack Mount Panel: amzn.to/3cotZMO
2U Blank Rack Mount Panel: amzn.to/2FVtWfB
Book me to mix your music! www.tanobrock....
Connect with me!
Instagram: / tanobrock
Facebook: / tanobrock
Twitter: / tanobrock
Website: www.tanobrock....
#Zoom #UniversalAudio #LiveMusic
Hey Tano! Although this video is almost 2 years already but I keep on revisiting this content. Oz I learned a lot from this. Can you make an updated video again for 2023 regarding live streaming for musicians in an updated version. Thanks.
This video was a lifesaver yesterday. I had neglected to test my Apollo Twin on zoom before I used it for an event, and was horrified by the distorted gurgly sound I was getting. I figured it out thanks to you. Although, I kept having system overload problems and feedback glitches that I couldn't get rid of.
FINALLY. THE VIDEO I WAS LOOKING FOR. Thank you
Yay! so glad to hear it. Make sure to subscribe if you haven't already :)
Karaoke Black one Play Music
that light is killer. me getting one. slso as a daily music zoomer thnk u🙏one q: howcome yr not wearing headphones?! im confused…
Great! Works with Apollo twin X. But when you change first two outputs to VIRTUAL 1&2 you have to change previous virtual channel to MON L&R to get the sound from ZOOM to Apollo. :)
Yes very true! Good point. Forgot to mention that in the video. Thanks for pointing it out!
I should have checked the comments before wrecking my brain for a long evening why I can't get the Zoom audio to a Virtual channel :) Turns out I still don't understand why it works, but it works! So, cheers!
How do you do this ? Thanks 🙏
@@sal1978man The same way in the I/O matrix, as Tano demonstrated in the video.
@@OliChristenDrew thanks ! Solved ! 😌
hi, tano... first of all, this is a nice video... second of all, may I ask what kind of monitor stand you are using that you can set that monitor so low...
hey bud. timing of this is great for me, at least. i'm using a twin quad apollo and Luna, and will tackle this over the weekend. i recently migrated from an m1 mini to an m2, and some devilish app i have is auto-recording my screen whenever zoom is activated, reaking havok. anyway, thanks and cheers!
If a interface like my zoom H6 recorder says 6 in 2 out, does that mean my hardware will automatically feed zoom software a clean stereo signal, not the typical mushy mono output you were referring to. If so do I still need a virtual router to make a clean stereo. If I use the zoom H6 as a multitrack, then I’m sure I would need a virtual router to make stereo. I use the stereo mix option on my zoom H6 so I think I don’t need that step for now, but I am shopping for pc plug-ins for my Cubase to digital mixing on the pc instead of the H6. Thanks great video, very helpful.
This is a timely post for me. Thanks, Tano.
How Music Michael Jackson Thirller
Not better for higher performance will be connecting srcond computer PC/Mac for Zoom app separatly?
Great video! Thank you. I see "Allow users to select stereo audio in their client settings". But do not see "allow users to select original sound" option in the settings. Is this a paid feature?
Thank you...so much help done👍🏻 i bought new interfere and connected directly but still couldn't get good music...
Great Video. One question: I have a Zoom Audio Interface which does not come with a dedicated control panel like UAD. In this case, how can I do the settings? I got stuck at some point in your instructions because of that. Help would be appreciated.
Hey! This will probably help: ua-cam.com/video/4o-JmFUIPMM/v-deo.html. In that video I give a detailed tutorial on how to setup a DAW for live streaming with any audio interface. The same method will work for Zoom!
awesome video Tano. Thanks. Please advise if my set-up is correct. I'm using Bose Tone Match T1 mixer where I connect my microphone & mp3 player . Then I connect Bose T1 output to Focusrite Scarlett 2i2 audio interface. Is there something you could suggest? I select the scarlett audio interface as my Zoom app Microphone. Am I doing it correctly? any other suggestion?
What stand are you using with the Dell monitor? It looks good like that.
Hi Tano
My church us Zoom for our services but having trouble using our equipments due to echos
Can you help on how to set up so that we can use mics and all our instrments.Working with a Behringer X32 producer.
Thanks for your help
Hey Tano, my non-techie neighbor is trying to do a meditation Webcast on Zoom with a 3DIO Binaural mic. To get the audio into her MAC, she’s going into a Focusrite Scarlet 2i2 USB interface. We changed all her ZOOM settings according to your instructions. We changed her Zoom profile setting to “Allow users to select stereo audio in their client settings”. She also changed all the required settings in her Zoom app. I assume that since the scarlet 2i2 only has two XLR jacks, it would only have two outputs going to the Mac through USB, so it shouldn’t have to go through any virtual audio device like Blackhole. We tested it out, by having her invite me to a zoom meeting. I excepted her invitation in two places, my Mac and my iPhone. I made sure that I clicked the button that enables “ original sound for musicians”. Everything I heard, was coming through both sides of my headphones in other words, mono. She was monitoring the audio on her scarlet 2i2 and said that she could hear it on the left and right sides when she whispered into the left and right ears of the microphone. Any idea which step I am missing on the receiving end or somethings she might be doing on the sending end?
Trying to figure out how to get.my uad apollo twin x working with my MacBook pro. I have a 2012 laptop, OS is Sierra and El Capitan partition. Sierra works with the uad but not my Canon M50. EL CAPITAN does not work with UAD twin x thunderbolt.
Nice work Tano. I too have been struggling with this. Greetings from NYC.
THIS!! Was very helpful. Zoom was driving me nuts!! I resorted to using a completely different computer with a completely different audio interface. I used my performing computer/audio interface and sent an output to the completely different audio interface/mixer. Then I connected that to a completely different computer to run the actual Zoom meeting/performance. This is the only way I could get the sound I was hearing instead of the horrible sound of trying to use one computer to do the performance and the zoom session on the same machine using the same audio interface. You just solved the mystery for me I had been troubleshooting for over a YEAR!!!! Thank you! The blackhole virtual audio program will essentially replace the separate system I had been using. Thank you again. I'm so glad I found your video. It was the missing piece!
Hi dear nice video, very good informations. Thanks. Can you please suggest virtual router for windows to use with Zoom?
Hi Tano, that was so well explained. I was always confused and frustrated. You made it simple to understand. Thank you so much. God bless. 👍🏽
Any suggestions for Non Mac users for a software similar to Blackhole ? Thank you
Hey Tano. Great video! I have an Apollo Twin Duo. If I want to run a bass, a vocal mic and a backing track, am I correct in assuming that you can run the backing track from your computer since you are routing system sound through the console and run the bass to one input channel and the mic to the other input channel thereby eliminating the need for an external mixer before the Apollo? Thank you (in advance).
Yes that’s correct!
Hi. What monitor/screen are you using? Thanks.
Lost me at minute 15:30 thank you for the help. The rest is great info. I new to this, I’m not a audio tech at all. But I’m interested in learning for my channel. This helps a lot. Is this the same with Facebook, and UA-cam lives?
Totally different to what my zoom looks like as of 04/09/2021 Have you got an updated video please? (PC)
Hi. I'm facing the same mushy output on our church, however, our pc is windows. Do you have any black hole alternatives?
Hi Tano, i am looking for a specialist like you to set up my zoom audio, as I am giving sessions on zoom where I sing and play guitar and I can't make the sound commercial. Could you help me please with that?
Oh hey Tano, I forgot to suggest to you how we can use Audio midi setup by blackhole especially the drift correction, what is this? What’s the function of this?
great tutorial - thanks so much! this is exactly what i was looking for. You made my day! 🙂
hey tano, could you recommend an alternative for windows users? blackhole seems to not be available on windows yet..
great video. exactly what I needed to fix my problem.
Hey! Great video. If I can ask please, how do I receive sound from a person speaking on a multi person zoom meeting, through logic?. So, i just want to hear the one specific person leading the meeting, route that through logic, then send out to all on meeting. But i wont be in same room as the person leading. I will be elsewhere with my laptop, monitoring sound and sending out to all. Thete will also be a music track i need to mix. So will just be 2 tracks I receive through zoom, then through Logic then back out through zoom to all.
Hey Tano, so I had followed your earlier video and created an Aggregate Device with my Scarlett and Soundflower 2ch. Was able to set up a mix inside Logic where all tracks go to stereo out (1+2) i.e. Soundflower and use a Bus to Monitor (3+4) Scarlett. Output of Logic is Aggregate Device. In Zoom, I can select either Aggregate Device or Soundflower 2Ch, and with all the settings ON as mentioned in this video, I still only get Mono audio. So is it that this only works with a console?...Cause doing it within Logic with an Aggregate Device still doesn't seem to work for me. Also I would like the flexibility of the Tracks in the DAW vs a console. Please let me know what Im doing wrong. Thanks :)
Hey man! Your setup should work. You have to select soundflower 2ch as the input in zoom. Double check your zoom settings!
@@TanoBrock Hi Tano, thank you very much for your reply. So the funny problem that I seemed to have missed, turned out to be that in Zoom, 'Original Sound: Off' was doing more than just compression and background noise clean up, it ALSO makes the audio Mono! The moment I switch that to 'Original Sound: On' it becomes stereo, along with all the settings you mentioned. Simple, but easy to miss. Thank you again!
Hi, I am using wirecast 15 to livestream to zoom and the sound has improved after all your recommendations but I would like to improve the audio more for live events I am struggling to find resources for EQ and compression for live events using a DAW to zoom. Do you have any recommendations for Fx/compressions/EQ resources I could use? Thanks
I think this is what I've experienced. SO, thank you!
Question... Have you noticed the Zoom stream compressing most of the Reverb out of your mix? If so, is there a solution you know of??
FANTASTIC thanks! Now I know why I was getting distortion. It sums it all up including the monitors hey. I've got Loopback for Zoom monitoring.. I'll set it up for input as well. Hey so do all participants need to select stereo audio or is that selected automatically by my master settings? Also.. how do you shut off the "gating"? I did a zoom concert and while listening to the playback recording that every time a participant talked.. it stopped the music. And vice versa while I'm playing I can't hear them talking. Can "FULL DUPLEX" be achieved?
Thank You Tano Brock. I have your same set up and I have a live show on zoom to perform tomorrow. thanks for the great tutorial
so your basically saying, you only had difficulties because your interface has more inputs so it caused zoom to mess it up. so thats the main reason you had to use blackhole ? so if my interface just has 1 or 2 inputs i wont have the same prob as you ?
Hi Tano, thank you very much a really helpful tutorial.
@tano Brock!!!! Thank you for this! I have been struggling with this for mooooooooooonths! I did finally figure it out ! But not the monitor part. I haven’t tried it yet. I’m going to try it out right now!!! I’ll let you know!
Heyyy so glad to hear! Yeah let me know if it works for you, I think it's a handy trick!
@@TanoBrock wow been using this nonstop!!!!! you saved me bro saaaaaved me
How can you check to make sure you have high quality stereo audio in the end ? Is it just a listening test? Because my RME FireFace800 audio interface allows me to "Loopback" all its outputs back into a stereo input. So I guess that would allow me to directly select my interface in Zoom with high quality stereo audio without the need to use Black Hole, Loopback or Logic. How can I check to make sure?
Dear Sir, I’m almost illiterate with how apollo solo work. I have an m1 macbook pro and I wan to record audio clips in voice memos app built into my MacBook. When I do that, recorded clip can only be heard through one side of my headphones. I’m using sm7b.
Please help.
@TANO BROCK...I was rewatching your excellent video which as you know I love and have recommended. REGARDING ZOOM ECHO CANCELLATION. VERY IMPORTANT humble suggestions by me. I was going through step by step. So it seems Zoom is very confusing and they are saying that "Unless you are wearing headphones and or playing a musical instrument, we recommend you ENABLE this function." So, for me, and I am wondering if you, I DO wear HEADPHONES AND PLAY a MUSICAL INSTRUMENT. So I have DISABLED (unchecked) this ECHO CANCELLATION. I haven't tested yet but wanted to let you know what I "discovered".
Thanks for putting this together. In theory this makes sense but for some reason audio isn't getting into Zoom. Tracing my signal flow I am getting signal from mic --> Preamp --> UAD Console --> Logic. I'm metering in Logic and my Logic output is set to Black Hole. In zoom my "Microphone" is set as "Black Hole" but I'm not getting any signal. Any idea what could be causing this?
Nevermind, I solved it. If anyone is having the same problem check to make sure software monitoring is on. I had mine off as I usually monitor through UAD console.
Audio sounded great coming out of my DAW when I recorded the zoom meeting and played the mp4 back to myself, but I can't hear myself WHILE I'm in the zoom meeting. Anything I'm missing?
Selecting Blackhole as Mic input on Zoom makes my computer microphone doesn't work. Which means I can't talk via Zoom?
Awesome got this set, how are you capturing the audio of your tutorial videos???
I've been using iShowU Instant. Super handy program! I use that to record my screen, and choose Apollo as my audio source, choosing the MON L + R inputs, as well as my mic input to record to discrete audio tracks.
Hi Tano! Great video! Is there a way to solve the latency issue(minute 14 in your video) with other interfaces like an Saffire pro 40?
Wow, this is so complicated. Thank you.
HEY TANO! Great Video. I have setup exactly as You but when I route my System Audio to the Virtual inputs I get All mac Audio(UA-cam, Safari etc) but Not Zoom Is Weird everything else is perfect but Zoom won't come through the virtual inputs
Great video, thank you Tano - I’m having the same issue...zoom won’t come through virtual inputs!
Yes good point! Maybe I should have addressed this more clearly in the video. But notice how in my IO settings I have virtual 1 and 2 set to outputs 1 and 2 (usually MON L + R are outputs 1 + 2). That's because zoom bypasses your "system" audio settings and goes straight to outputs 1 and 2. This solves that problem!
Hey, thanks for the video! I have the exact same setup as you with a UAD Apollo 8, but having some trouble. I can get the audio from my DAW (ableton) to route to Blackhole, and then to zoom successfully, but I cannot monitor the sound from Ableton through my headphones/speakers because it's going out to Blackhole and not through UAD console. Any suggestions?
Hey! Check out my other video on streaming from a DAW: ua-cam.com/video/4o-JmFUIPMM/v-deo.html
I explain how to create a monitor aux channel so you can hear everything :)
I did everything you did here, and I can only get mono to happen. (Using a note 8 to monitor). It never asks me anywhere if I want to change to Stereo. Not using Zoom Pro. Help anyone??
Hi Tano! I have a question: I have followed your steps and it does successfully work! I am also adding reverb via logic x and that was excellent. The only problem is that after a while (probably 30 mins in), my video and audio slowly desyncs. What do you think the problem is? I am using an M1 MacBook Pro and I am not sure what might be the problem. Great content! I full appreciate it and wish for more!
Good job! We figured out our latency problem, thanks to you. (Why I deleted my previous post). Cheers!
Great to hear! Make sure to subscribe if you haven't already :)
@@TanoBrock I did indeed!
Very inspirated! Thanks 🙏🏻
Hello Tano, great video, lot of informations I could setting my mac for zoom almost at 100%, thank you very much :) ! But the problem is that I have Focusrite Scarlet and not UAD interface and for the 1st gen I don't have a virtual console. So how can I do the last trick for removing the stream back of the zoom meeting for the echo feedback ? (Sorry my english isn't great, hope you understand what I mean).
I made a track on GarageBand and I want to add Guitar to it while recording myself as well. Will this do the trick if I use zoom to record myself?
Thanks for all the tips ! Just a question i pretty much understand the routing of uad to blackhole n everything for zoom. Will it work with google meet? How to select the options of turn on original sound in google meet or would it be necessary there?
Hi Tano, wow finally after lots of stress clarity with Zoom, thank you so much. I plan to use UAD Luna as the DAW to record my sessions and livestreams. Seems I cannot change the Output in Luna, no options. How would you go about summing it all in to two channels? I have loopback.
Hey Tano, Thanks for this. This has given me about 90% of what I have been trying to figure out. I am using an behringer X32 mixing board as my audio interface(plus Logic). I have been trying to create this setup in that. I am going to do some experimenting later. Logic, I have been using for about 20 years so I am very familiar with that, but I just got the board and the routing seems a little convoluted. Good luck in LA
Thanks Tano... Great job ! And I want to wish you the very best out in your new home, LA... I'll be looking for your HITS...
Be well...Tony
Can you please advise me. Im zooming my church services through zoom. I have a Mackie Profx10v3 which i plug it into my USB on my computer. I plug my ipad into the mixer and a microphone. The people can hear the music pretty good but cant hear me singing at all. I also have to add Im not the moderator of the zoom meeting. Please if anybody have any input how i can do this at a level of good quality i would appreciate your input.
How does this apply if I'm not the host of the meeting? Or do I have to be the host?
I wonder if it is possible to utilize the built in apple audio midi audio devices app.
This is extremely informative, thank you. I have a slightly different setup and I'd love to get your feedback: I am using an ATEM Mini Pro video switcher to do live edits between four cameras and Livestream into Zoom, using Logic Pro through a Saffire PRO 40 for audio. I have a PC running the Zoom meeting and a Mac running Logic. If I send a stereo out from my Logic into the Atem, and then use the ATEM as my audio device in Zoom, will I avoid the Zoom summing audio issue you mentioned? Thanks again for a great video.
How do you combine this video and OBS? What would the OBS settings be?
Great advice man! I have one question for you or anyone in the comments. I route it through zoom but when I am playing the backing track through my DAW my students can't hear what I am playing on saxophone. only the backing track will be heard.. Suggestions are welcomed.
Amazing, Video... You are Doing a great JOB
Thanks!!
Great info thank you!
How are you routing your entire's system audio via UAD?
we are not finding allow users to select original sound in their client settings in zoom profile advance settings . please could you help
Same here can't find it, not sure what to do?
Can be avoided by simply buying a Mixer like an Mackie onyx or model 12 solves both … but for ua users great vid..
How can I stream using Merging Anubis interface? Thanks!
Nice video always a big help
Thanks, best recent video.
Mate awesome video
I need help big time I have been trying to set the zoom live streaming up for my live show and I am literally exhausted trying.
You are awesome thank you so much! : )
An issue I'm having is getting the signal loud enough on the receiving end of the call. I'm sending a strong signal to blackhole but at max volume on the receiving end of the call it's only a moderate volume.. not sure why this is.
what alternative for black hole for windows?
Hi Tano Great Video.... I was struggling to get stereo sound on zoom. I have exactly routed as per your video but still I am getting mono sound.. I am Using RME FF800 routed to Nuendo 11 to Virtual output A to Zoom IN with all usual settings for stereo sound.... What I am doing wrong?
What's your microphone input in Zoom? Email me at tano@tanobrock.com and we can set up a Zoom consult session
Hey brother - great channel! Do you know I can get incoming Zoom audio from other participants to route to my virtual inputs in UA Console?
believe it or not I just figured it out, but it is kind of work around - I would love to know how you suggest.
Will this allow me to play drums through zoom and get my mixed Logic sound? I would ideally run DAW > logic > Zoom so that the participants would hear the finished mix. Thank you.
Yes, that's exactly what this allows you to do!
this is for MAC....anyone have any solutions for PC!????
I think the same idea applies! You have to use some sort of virtual audio device that can give zoom a 2 channel stereo signal. Voicemeeter Banana is one :)
I am singing on Zoom via Samsung cell phone; How do I optimize the sound for voice and CD player?
Thanks. I was wondering why it wouldn't go out in stereo no matter what I did. I also noticed that Zoom would ignore my UA Mute settings, so if I muted my vocal channel in the Apollo, it would still register Zoom. I got around that using Loopback, but I was using 6 outputs in Loopback and I guess it must have been summing that to mono, cause I could n ever get it to send stereo. Thanks for solving that befuddling problem.
BTW. I have a DAW too, but to reduce the 20 ms of latency or so, I decided to go this route. I didn't want my DAW running in the background either. I already have enough stuff running. The only thing I wish I could do with Loopback is to be able to add a Limiter plug-in before outputing it. Soundsource let's you do that, but I haven't quite figured out how to use them together.
Where did you buy your Desk.
Can this be applied to Google meet as well?
Hey Nano thank you.
Thank you!!! So helpful.
If my mix is mono (a simple guitar and vocal set up), is it still relevant to make sure the output to zoom is stereo?
I guess yeah..to make it sound balanced
VERY HELPFUL.THXS
so glad to hear! Make sure to subscribe if you haven't already :)
Is this how to do virtual band practice too?
thank you... subscribed.
Do you know how to do it with Protools?
Anybody using a Presonus Studio 1810c?? Trying to share my screen and the audio from Logic Pro, but even when I enable my audio nobody can hear Logic. 😢
Do you give private zoom lessons?
Yes I do! Email me: tano@tanobrock.com
What desk are you using?
I designed and built my desk myself. Might do a video on it soon. Would you be into that?
@@TanoBrock I'm sure a lot of people would be interested considering the average entry level studio desk will run you $700 (output platform)
Is there any alternatives for PC users?
Try VoiceMeeter Banana! Similar idea to BlackHole/Loopback