Hey brother, I appreciate all the videos that you've been putting out, it has helped me so much, quick question, have you ever had a pop up window saying " cut not authorized" after pressing the cut button while using the film cut program. I'm using a workhorse 2
Everytime i press test on the machincd it wrinkles my tint and the test cut isnt that good. Ive tried playing with the force and speed but nothing is working. Ive also made the screws in the back loose but no luck. I have ceramic tint
just had to post because I'm looking for what is the best size of plotter and this was the first video I clicked on ... and I am also from Gainesville, small world
My machine cuts the 2019 -2020 Toyota Camry so bad im not sure what it is some cars it will cut fine and some bad i dont know if its the software or my plotter i dont know what to do anymore the top edges is the problem doesn’t match with the glass wobbly ~~~~ i use film cut and have this same exact plotter
@@dover1966 I wouldn’t say it’s the best. But let’s just say it is the best….. even the “best” software is going to have some patterns that are off. It’s not all patterns. Although sometimes you’ll have a string of vehicles with patterns that aren’t perfect, and you’ll think it’s all of them but it’s really just a coincidence because it’s usually only a handful that aren’t acceptable. I’d say a conservative estimate for how accurate the plotter software is would be about 85-90%. Which still really isn’t that bad when you think about all the different vehicles and model years out there. But still leaves that 10-15% that are just too far off to be acceptable. Or leave light gaps on the edges. If anything though as you mention it usually just comes down to the top edge. Which you could shave or file if they aren’t perfect. The whole thing about the plotter software is even though it’s a “computer” and you expect everything to be exactly precise. The fact of the matter is that in order for them to get the templates for the windows someone has to hand cut a pattern and send it in. So even though a computer delivers it to the end user, the software is still only as good as the patterns that their installers cut and send in to be added to the program.
You are the man .
You help me a lot with my workhorse 2
Hey brother, I appreciate all the videos that you've been putting out, it has helped me so much, quick question, have you ever had a pop up window saying " cut not authorized" after pressing the cut button while using the film cut program. I'm using a workhorse 2
Having the same issue I tried everything
it happens when the connection is not good trough the usb port
Hey Kevin, can I use 55 inch ppf roll in the 55 inch workhorses 2? Or does the roll have to be slightly smaller
Hey Kevin I had a question regarding the software. Is the software compatible with Vevor Vinyl Plotter?
Hello!What software do you use to cut PPF film?
Good job! Would like to get a plotter to play with! Which one do you recommend? WH2? Is there any software that works on Mac?
Everytime i press test on the machincd it wrinkles my tint and the test cut isnt that good. Ive tried playing with the force and speed but nothing is working. Ive also made the screws in the back loose but no luck. I have ceramic tint
I'm sorry that you're having problems operating the plotter. Please call in so we can assist you with that.
Where can I get a static string ? Thanks in advance!
just had to post because I'm looking for what is the best size of plotter and this was the first video I clicked on ... and I am also from Gainesville, small world
Do you need to have internet connection for the software (film cut) to work? Asking for a mobile situation.
My machine cuts the 2019 -2020 Toyota Camry so bad im not sure what it is some cars it will cut fine and some bad i dont know if its the software or my plotter i dont know what to do anymore the top edges is the problem doesn’t match with the glass wobbly ~~~~ i use film cut and have this same exact plotter
It’s the software.
@@burner__account i use film cut thats the best software to use with it from what these people say
@@dover1966 I wouldn’t say it’s the best. But let’s just say it is the best….. even the “best” software is going to have some patterns that are off. It’s not all patterns. Although sometimes you’ll have a string of vehicles with patterns that aren’t perfect, and you’ll think it’s all of them but it’s really just a coincidence because it’s usually only a handful that aren’t acceptable. I’d say a conservative estimate for how accurate the plotter software is would be about 85-90%. Which still really isn’t that bad when you think about all the different vehicles and model years out there. But still leaves that 10-15% that are just too far off to be acceptable. Or leave light gaps on the edges.
If anything though as you mention it usually just comes down to the top edge. Which you could shave or file if they aren’t perfect. The whole thing about the plotter software is even though it’s a “computer” and you expect everything to be exactly precise. The fact of the matter is that in order for them to get the templates for the windows someone has to hand cut a pattern and send it in.
So even though a computer delivers it to the end user, the software is still only as good as the patterns that their installers cut and send in to be added to the program.
@@burner__account 95% patterns are off im sure its the plotter I’ve followed all the steps and still getting shitty cuts horrible smh
@@dover1966 ok
Question this software has headlights? And full car for ppf.?
Yes. The software does off PPF.
How is this for PPF?
Following*
Did you end up purchasing one?
My wh2 works great not just play with the blade if you have problems
I use the force at 96 lol or else it doesn’t do anything
42g of force you said but you set it to 72?
My personal plotter is set up a little different so I use a little different than the mentioned. I mentioned that in beginning of the video.
Just curious where did you buy your Teflon tape to put on the cut tape?
@@isaiahwillis5082 from Amazon for the specific tape I used.
I followed all these steps my work horse cuts horrible im starting to think this plotter is not good for window tint
Mines the same, can't seem to dial in the blade no matter what I do
@@autorecondetailing4294 yeah bro its weird the top edges don’t match with the glass looks wobbly shits annoying
Me too, i still cant figure it out. Any updates if u fixed it?
@@Hussainboss69 i sent that machine back
@@dover1966 what did u buy instead?