Good video but at 12:21 in the video the special clamps for the landing gear on leg 6 & 3 are not in place. I assume they are still in the box. The only way to get them in is to take the frame apart again. At 14:05 they are there and you attach the landing gear. You should have left that in so people will know....
I've been trying to learn about consumer drone "engineering" but it's starting to seem like there's really no such thing. There's component engineering and component assembly, which means it's really no different than building a PC or RC car or any other device with standardized interfaces between control logic an actuation. Is that right or am I missing something important before I start selecting the right combinations of frame, control circuit boards, motors, etc?
OK HeliPal... You need to edit your video a bit... Where you add the landing gear... If you are using the kit indicated in the video which I think is stock... LOOK AT THE INSTALL FIRST... BEFORE mating the two central frame pieces together for the hex... What a pain in the rear to take apart the two stationary boom mounts and near disassemble the central frame to get the 2 gear pieces in. Other than that this was a great instructional video!!!
Christopher Payne Thanks again for your support and you advice is very valuable to us. We found that it was not perfect either and we will further improve it in the coming video. Many thanks
Checked the library for the song but couldnt find it can you share the title with us? Please dont the same thing as you did for 3 or 4 others that asked.
Never bukket plug your battery leads to plug into your vehicle. In a crash the leads can pull out from the vehicle socket and short together. Everyone knows what happens when you short a lipo. Solder your battery connetion lead on the the vhicle directly to the power distribution board.
nice video! , but i strongly believe you could have managed the power distribution without that many cables, theres a little power distribution board you conect all positive and negative and comes with an rx60 plug :D
hey Nice video .Can you suggest me am a bit of confused. My HMF Hexacopter 550mm AUW is 2500gm. What motors and props can I use so that I get enough power at around 75% throttle??
Thanks for great video I want to build a drone to use my Panasonic GH4 camera, which frame and tools do you recommend? could please your recommendation? Thanks
HeliPal Thanks for reply. They are only frame sets. I asked for all ESC, FPV, rotors and other things you used particularly in this projrct? Thanks a lot again.
My 2 cents I have built the Tarot 650 good product good Quad Tarot 680 pro good product good hex Tarot T960 sane as the T810 just longer arms. I don't like it. I have replaced 3 locking clamps. I just don't think well designed.. the folding system is better on there smaller versions. One other thought I want to point out. you need to decide the end mission before you select and would only select this if the mission was to carry much more than a go pro. Another thought. The landing gear is in the way and there are 2 solution. mount the camera way out in front as they did or add a retract system but that adds cost and weight. there are better solution but not in any I have mentioned. As for stability it is more complex than just size and I believe my T650 is just as stable and I can carry the go pro and enough batteries to stay in the Air 45 minutes no problem. Yes of course you can carry more batteries on the T810
The hexacopter in this video is a T810 but it's out of stock now. You can find other available hexcopter here: www.helipal.com/multi-rotors_frame-set.html
Good video but at 12:21 in the video the special clamps for the landing gear on leg 6 & 3 are not in place. I assume they are still in the box. The only way to get them in is to take the frame apart again. At 14:05 they are there and you attach the landing gear. You should have left that in so people will know....
I've been trying to learn about consumer drone "engineering" but it's starting to seem like there's really no such thing. There's component engineering and component assembly, which means it's really no different than building a PC or RC car or any other device with standardized interfaces between control logic an actuation.
Is that right or am I missing something important before I start selecting the right combinations of frame, control circuit boards, motors, etc?
just received a 810 frame kit for the Bday... this will save my ass for sure!! Awesome video!
OK HeliPal... You need to edit your video a bit... Where you add the landing gear... If you are using the kit indicated in the video which I think is stock... LOOK AT THE INSTALL FIRST... BEFORE mating the two central frame pieces together for the hex... What a pain in the rear to take apart the two stationary boom mounts and near disassemble the central frame to get the 2 gear pieces in.
Other than that this was a great instructional video!!!
Christopher Payne Thanks again for your support and you advice is very valuable to us. We found that it was not perfect either and we will further improve it in the coming video. Many thanks
it tarot specific and comes with the copter you can buy it direct
Checked the library for the song but couldnt find it can you share the title with us? Please dont the same thing as you did for 3 or 4 others that asked.
***** its a popular music theme in piano. Search NBA Where amazing happens
Never bukket plug your battery leads to plug into your vehicle. In a crash the leads can pull out from the vehicle socket and short together. Everyone knows what happens when you short a lipo. Solder your battery connetion lead on the the vhicle directly to the power distribution board.
Good job on the build and thank you for posting this video, looking forward for part 2...
where the best way to extend the wires: from battery to ESC or from ESC to motor?
Please contact info@helipal.com and our colleague will be there to assist you
+Alexey Nevedrov hey did you get an answer to this?
nice video! , but i strongly believe you could have managed the power distribution without that many cables, theres a little power distribution board you conect all positive and negative and comes with an rx60 plug :D
Hi, can you tell which PDB you mean? What do you advise?
Can you please tell me, how much it can carry weight?
The payload of Tarot T810 is about 1~1.5kg
can you tell us for wich peace you take
Does anyone know the exact way to hook up a F3 flight controller for a hexacopter im getting screwed up trying to hook to the receiver
It would of been nice if you started with a name of all the parts you were using.
Noted and will try to improve it later on :)
Hello i m making a s550 hexacopter can I use the the SZ007 transmitter it is 7 channel
hey Nice video .Can you suggest me am a bit of confused. My HMF Hexacopter 550mm AUW is 2500gm. What motors and props can I use so that I get enough power at around 75% throttle??
+Vivek Gr 920kv motors 3s 1045 prop combo
what is the power of multirotar
Thanks for great video
I want to build a drone to use my Panasonic GH4 camera, which frame and tools do you recommend? could please your recommendation?
Thanks
Can you put the video in slow motion I have to make a list of the parts.
You can find what we recomment part with T960 at below link:
www.helipal.com/tarot-t960-hexacopter-frame-set.html
Nice work video. Thanks.
anyone know the name of the connector he uses to solder all of the motor wires too?
Please check the package includes here:
www.helipal.com/tarot-t810-hexacopter-combo.html
Kheang Nou 6 in 1 Aggregator Set TL9607
[TL9607]
HeliPal
Amazing job! Can you give the list of products featured in this project please?
flashbond
T810 is out of stock and you can find hexacopter / octocopter set at below link:
www.helipal.com/multi-rotors_frame-set.html
HeliPal Thanks for reply. They are only frame sets. I asked for all ESC, FPV, rotors and other things you used particularly in this projrct? Thanks a lot again.
How long did it take you to build?
Around 1 - 2 hours
thanks. Where is part 2 ?
this is not titled as "part 1" please anyone.
Many more will come soon, please subscribe and monitor our latest release :)
Wow good job
Really good job
I would stay a whole year to do that
I wanna buy the nano drone its so cool and awesome and cheap
I like the others tho
My 2 cents
I have built the
Tarot 650 good product good Quad
Tarot 680 pro good product good hex
Tarot T960 sane as the T810 just longer arms. I don't like it. I have replaced 3 locking clamps. I just don't think well designed.. the folding system is better on there smaller versions.
One other thought I want to point out. you need to decide the end mission before you select and would only select this if the mission was to carry much more than a go pro.
Another thought. The landing gear is in the way and there are 2 solution. mount the camera way out in front as they did or add a retract system but that adds cost and weight. there are better solution but not in any I have mentioned. As for stability it is more complex than just size and I believe my T650 is just as stable and I can carry the go pro and enough batteries to stay in the Air 45 minutes no problem.
Yes of course you can carry more batteries on the T810
Specs, parts list and cost?
You can take a look below and you will find what you need :)
www.helipal.com/multi-rotors_frame-set.html
the size of the propeller how much
USD$28.90 for 1 x Tarot 1555 Carbon Propellers, please check here:
www.helipal.com/tarot-1555-carbon-propellers-two-holes-cw-and-ccw.html
what is the song in the background?
UA-cam has an audio library. Do some search and you can find this music. They are free and copyright free.
HeliPal What title? Thanks
photohubercik NBA where amazing happens
how much to build one
The hexacopter in this video is a T810 but it's out of stock now. You can find other available hexcopter here:
www.helipal.com/multi-rotors_frame-set.html
What is the song name
?
UA-cam has an audio library. Do some search and you can find this music. They are free and copyright free.
Randy Lachman search NBA where amazing happens
That's doesn't look a like work on one looong rainy afternoon... :) NIce video
Nice
Please start the video with the name of all parts.
+Ali Asir You can take a look below:
www.helipal.com/tarot-t960-hexacopter-frame-set.html
hi how is name this song? sorry my english
UA-cam has an audio library. Do some search and you can find this music. They are free and copyright free.
Nico Lestani NBA where amazing happens
Everyday by Carly Comando
Take that DJI NAZA and throw it away 😅 worst sub featured and crap flight controller I've ever used.