Hi Justin, can this be used on masonry paint. I painted my garden wall this summer in our heatwave period and there is staining showing through already. I used 2 coats of granocryl on top of a smooth pre painted surface.
@JBTV B-I-N@ Aquacan be tinted with up to 16mi of universal tinter per litre. Tinting the primer toward the colour of the topcoat helps it hide in one coat Apply mare on surfaces with odour and stain problems. Paint spot-primed exterior surfaces after they dry. Lower temperatures, higher humidity, and the addition of tint will rolong dry and cure time of theproduct. For knots and stains, allow 2 hours to dry. When sealing water stains. some stains may appear in the primer as it dries This is normal. The stain is locked and willnot bleed into the topcoat. Not recommended for full surface application on exterior substrates, garage floors, decks, patios, porches, excessively humid interior. areas e.g. sauna rooms, damp surfaces, o surfaces subject to immersion or prolong ed contact with water. DRY TIMES BY 20 C/RH 50% 25 minutes Touch dy: Dry torecoat: 45 minutes Fullycured: 7 days RECOMMENDED WET FILM THICKNESS 100-137 pm RECOMMENDED DRY FILM THICKNESS 37,5-50 um SAFETY This is of the zinsser eu spec sheet. It would be nice to know who is right
JB, I refuse to believe a waterbased paint can hold back water stains or knots
Should have painted one of those doors with zinsser bin. Just to have a little side by side comparison
Hi Justin, would you describe this primer as 'Brilliant White'?
green timber you want to treat with lots of fungi wash leave over and wash down with good scrub brush then leave timber to dry out over night
Hi Justin, can this be used on masonry paint. I painted my garden wall this summer in our heatwave period and there is staining showing through already. I used 2 coats of granocryl on top of a smooth pre painted surface.
Hey! I don't know for sure, but I would certainly give it a go, particularly as its exterior and can be painted onto almost any surface..
Hi Justin,
Great review. I've only seen this available in Brewers & on line as its so new. Im aware it can be tinted too. Keep up the good work. 👍
Thanks man 👍
An it be used for top coat as well
👍👍👍.Thank you
Check the specs sheet, mate.
It like Red bin only should be used for spot priming only on exteriors.
Not according to Zinsser, mate.
@JBTV have a read of the spec sheet mate.
So if Zinsser are telling you that.
Then their spec sheet is wrong. 🤔🤔
@@painterman8863 I'll look into it 👍
@JBTV 👍
@JBTV B-I-N@ Aquacan be tinted with up to 16mi of universal tinter per litre. Tinting the primer
toward the colour of the topcoat helps it hide in one coat
Apply mare on surfaces with odour and stain problems.
Paint spot-primed exterior surfaces after they dry. Lower temperatures, higher humidity, and
the addition of tint will rolong dry and cure time of theproduct. For knots and stains, allow
2 hours to dry. When sealing water stains. some stains may appear in the primer as it dries
This is normal. The stain is locked and willnot bleed into the topcoat.
Not recommended for full surface application on exterior substrates, garage floors, decks,
patios, porches, excessively humid interior. areas e.g. sauna rooms, damp surfaces, o
surfaces subject to immersion or prolong ed contact with water.
DRY TIMES BY 20 C/RH 50%
25 minutes
Touch dy:
Dry torecoat:
45 minutes
Fullycured:
7 days
RECOMMENDED WET FILM THICKNESS
100-137 pm
RECOMMENDED DRY FILM THICKNESS
37,5-50 um
SAFETY
This is of the zinsser eu spec sheet.
It would be nice to know who is right