2010 Honda Civic Hybrid Center Console Latch Replacement
Вставка
- Опубліковано 15 жов 2024
- Easy and straightforward fix.
I am by no means a mechanic or videographer but I am a DIYer.
Please share questions/comments/tips/concerns below.
Thanks for watching.
Absolute goat. Installed in 2 mins
I looked at a couple of youtube videos covering the same repair issue. They were all good; however, yours had the best HD videography in my opinion and it gave me the confidence to effect the repair myself. It took me less than five minutes to remove and replace the center console latch in my 2010 Honda Ex Coupe after watching your video. FWIW, I also bought an OEM latch after reviewing some of the comments about the knock-off latches on Amazon. Thanks for your efforts. I saved a lot of money.
I appreciate the comment I’m glad I can help!
Nice work! You’re are correct. A pretty easy fix!! This latch has been a pain for years, then can’t believe I was considering the dealer fixing this.
Very doable and easy money saved! Thanks for watching and the comment!
i put the spring in backwards and now i cant remove the latch, have you had any problem with this or know how to remove it. the holes are too tight and i cant seem to slide the rod back out
nvm i fixed it haha
@@maxsaucedp3767 maybe a small thin flat head can slowly push the rod towards the hole with the opening.
Just got done doing mine. I have a Husky 55 piece socket wrench set that has 4 Torx bits, one of which was the right size. I bought the GaeaAuto latch off Amazon, and it works just fine. The only problem was getting the cross pin situated right because it was a very tight fit. But thanks to old man strength and one thin dime, I was able to force it into position.
Thanks for watching and the comment!
Thank you ..finally found a video where there not over explaining .
Thanks for watching and the comment!
wow thank you so much! Just followed your video and was done in 5 minutes!! Such an easy fix to a veeeeerry very annoying problem! lol
I agree it’s very annoying! Thanks for the comment!
Lol thanks for the vid bro. I was so confused on why tf i couldnt reinstall this so simple looking thing. I just missed the shoulder thing step. My center console plastic plate thing snapped in half and i just bought a new one and had to install this plastic thing again
Glad I can help! Thanks for watching and the comment!
thank you thank you thank you
Thanks for watching and the comment!
Huge help. However, now I can't get the cover part to go back on. oh well, at least it stays shit now 😂
Thanks for watching and the comment!
Very clear and well done!! Thanks for putting this video up!!!
No problem, thanks for the comment!
Thanks. This was a big help.
Thanks for watching and the comment! Glad I can help.
Great video. What was the tool you used to remove the screws. If u have a link to it that would be great. Thanks!!
Thanks for the comment I have the set below but it comes with a lot of socket and ratchet sets a lot of the time
LEXIVON Torx Bit Socket Set, Premium S2 Alloy Steel | 13-Piece Star T8 - T60 Set | Enhanced Storage Case (LX-143) a.co/d/aj7Z7BI
Thanks my friend!!
Thank you! My center console has been broken for months... >_
Thank you for watching and the comment! Going to be a lot better once it’s fixed!
Im at my wits end. same car, latch broken in exact same place and cant get the latch clip removed for sh*t. What are you pushing on, on the left side of the latch? No flaming please. I usually good with this stuff.
Yes I was pushing on the left side of the latch, you kind of have to hold the center console lid in place so it doesn’t move when pushing the latch. Try and push close to the holes that the pin goes through rather than the part of the latch you can see when the cover is on.
Thanks for watching and the comment good luck you got it!
@@torrer2013 Thanks! Managed to get it out, damn it was stubborn. Just waiting for the new part. Hope replacing it goes smoother. LOL ty brs !
Very helpful video. Thank-you
Glad I can help thanks for watching and the comment!
thanks bro!
Thanks for watching and the comment!
hey what screws are used for the console. I lost the screws so could you help me with this? Thanks
I can’t find a part number or replacements but you can probably go to a salvage yard and find them on a same model car as yours. For this model it’s a t15 torx.
Thanks for watching and the comment!
Gud am sir, where can I order that clip for my honda city rs 21model? Thank you so much!
Qiilu Armrest Cover Lock Center Console Lid Latch For Honda Civic 2006-11 83451-SNA-A01ZA (B) a.co/d/g4dlt8j
I don’t know if this is the same part for that Honda but this is the one I used.
Thanks for watching and the comment!
Does this work for 2010 Honda insight?
Unfortunately I’m not sure, I would imagine it would be pretty similar though
👌🏽👌🏽👌🏽
Link to item part?
Qiilu Armrest Cover Lock Center Console Lid Latch For Honda Civic 2006-11 83451-SNA-A01ZA (B) a.co/d/8JkUBdI
Thanks for watching and the comment!
Where did you get that screw
I’m not sure what screw you mean, the 2 t15 torx are part of the center console, the pin and spring are also part of the center console. The only part I had to purchase was the latch which I ordered on Amazon and has been working great.
Thanks for watching and the comment.
@@torrer2013 the tool you used so you could take out the 2 bolts in order to replace the latch, thank you for your response
The bit is a t15 torx which came with a set I bought a while ago
LEXIVON Torx Bit Socket Set, Premium S2 Alloy Steel | 13-Piece Star T8 - T60 Set | Enhanced Storage Case (LX-143) a.co/d/dfmXAXI