Teardown Naim Muso

Поділитися
Вставка
  • Опубліковано 8 вер 2024
  • Inside Naim Muso

КОМЕНТАРІ • 20

  • @brolyzhou3241
    @brolyzhou3241 Рік тому +1

    高級的肢解技術,大飽眼福!!! 讚

  • @zeljkogagic2551
    @zeljkogagic2551 Рік тому

    Hmm i think when i dumped the muso in the box sounds better… thank for the Video 🙂

  • @cleber-omontanha2693
    @cleber-omontanha2693 Рік тому

    Que qualidade de engenharia de construção 👏🏼👏🏼

  • @piotr8828
    @piotr8828 Рік тому

    Seeing how you deal with this brushed aluminium and bare speakers I would give you anything to fix. 😅

  • @andrewmorris9010
    @andrewmorris9010 Рік тому

    My unit won't power on at all. Tried several power leads which i know are good. Any ideas please? Thanks

    • @wormfood868
      @wormfood868 4 місяці тому +1

      I'm in the same boat; I read online that the power supply in these are a common failure point. Unfortunately these weren't really designed to be easily repairable. I'd email Naim, last I heard you'll have to pay shipping to the factory in the UK and back as well as the cost of parts to get it repaired.

  • @moacirdiasneto
    @moacirdiasneto 3 роки тому

    Do you have any suggestions on how to repair tear in speaker?

    • @deltamobile5325
      @deltamobile5325  3 роки тому +2

      chat me via facebook facebook.com/ngongocrang

  • @billy5052
    @billy5052 3 роки тому

    Hi do you have a picture of the back of the pcb I have a blow resistor but cannot see the value

  • @romain9317
    @romain9317 3 роки тому

    I didn't see clearly, is the input socket (Line in slot next to the USB port) easily accessible for a quick repair once you've opened the case ? It's loose on my device. Thank you

  • @youyoudeyou
    @youyoudeyou 3 роки тому

    Hi! Did You still remember the main output of the PSU board? Have one shutdown itself after 10minutes; considering tear down and replace a compatible PSU board…thanks

    • @deltamobile5325
      @deltamobile5325  3 роки тому

      try to clean all connector jack of control pod !

    • @youyoudeyou
      @youyoudeyou 3 роки тому +1

      @@deltamobile5325 many thanks for your reply, but the symptom of my unit is power on button blink and red light LED blink after a while; according to the manual seems Amplifier overload then protection; I will try to disassemble it according to your useful video instructions to try if some luck.

  • @paulk9534
    @paulk9534 Рік тому

    Wow… it should be a crime to do that

  • @ronedwards8239
    @ronedwards8239 3 роки тому +1

    If this were a Bose Wave Radio, the haters would say $50.00 worth of parts. But give other companies a pass. Yes , this is a far better product. And it should be Wave Streaming Radio $500. Muso 2 $1,750

    • @marcoschreur3525
      @marcoschreur3525 3 роки тому

      You're totaly right.

    • @genesis667
      @genesis667 3 роки тому +1

      You've never owned a manufacturing corporation have you?
      The parts are just one thing that goes into the mix.
      Someone has to pay all of the employees and the retailers
      don't work for free either...

  • @madzikurbaniec5300
    @madzikurbaniec5300 Рік тому

    Do U guys can help with red blinking diode?is it any way to fix it?many thanks

  • @gpobndit1136
    @gpobndit1136 4 роки тому

    Is it first or 2nd generation?