I put air bags in the coils. Not sure on g bodies but my 70 chevelle ran low 9 on stock suspension. They have a hop up changes the pitch of the angle of rear-end. Good shocks
Auntie Em!! Auntie Em!!..Dorothy!!..It's a Twista!!!...lmfao..Ole Monte C is of to see The Wizard..Definitely gotta have a Anti-Roll bar on it and then we can probably see on the bumper...then it would be..🎵🎶Rocketman🎶🎵.. Great content Nick..Eric love ya brother..😂😂
@Nicks performance & auto hit that thumbs 👍 up brother it helps with your subscribers when they see the creator likes their post in the comments..u can even create your on badge or logo for when u like a comment
Nick, nothing but str8 🔥 buddy!....can you disclose any internal mods done to this 6.0... (like pistons, rod's, compression ratio, carb size, cylinder head size) and is that with a power glide transmission?
@@tyronealle.6799 No buddy put a anti roll bar on the car and it stopped all that twisting it doesn’t do that any more Thanks buddy for watching the channel and for all your support
Get sub frame connecters under there if not aready and roll cage if not it help with that twist might have get that under side stiffened up bout say With that anti roll bar It be a best nice ride I love muscle 💯 can’t wait see it leave straight
The rims are 17 /4 inch wheels with a 205 /75 -17 tire thanks buddy for your support ya it’s just going to get bader when we put the anti roll bar on it
What happens is the body is twisting from the power of the motor so u have to put a piece on the rear end and weld it to the frame of the car and it stops it from twisting
@@Nicksperformanceauto how much for engine work meaning as tune & rear end work , I love the way the cars leave that line . I have sbc 385 stroker and 400 tran 3:73 gears
@@Nicksperformanceauto his comment tells you he's not a real racer or tells you he's not real fast. Cause you can build two of the same cars one might work the other might not
@@fastvsix ok well that car just coming out so they gotta figure things out. But I got a Monte 4000 plus pounds with me in it all steel sbc with a peanut 350 on one gun No computers a play small carb what you wanna do
Now That, is a G Body Shuffle.
ya it is we got all that out now Thanks buddy for watching and all your support
Nice build super nice picture at the end 👌
Thanks buddy for your support ya I build that car for a friend of mine
I put air bags in the coils. Not sure on g bodies but my 70 chevelle ran low 9 on stock suspension. They have a hop up changes the pitch of the angle of rear-end. Good shocks
Very nice street car
thanks buddy for your support ya we going to put a anti roll bar on it that car making a lot of power
Auntie Em!! Auntie Em!!..Dorothy!!..It's a Twista!!!...lmfao..Ole Monte C is of to see The Wizard..Definitely gotta have a Anti-Roll bar on it and then we can probably see on the bumper...then it would be..🎵🎶Rocketman🎶🎵.. Great content Nick..Eric love ya brother..😂😂
lol thanks Chris buddy I love that comment there ya it sould be real nasty when that anti roll bar goes on there
@Nicks performance & auto hit that thumbs 👍 up brother it helps with your subscribers when they see the creator likes their post in the comments..u can even create your on badge or logo for when u like a comment
@@SpeedLegacyGarage thanks Chris buddy ya u saying that in the comments they see it to and do it also
👀👍🏾😎🔥🔥🔥 There's some pony's under that hood!!🏁🏁🏁YESSSIR!!
Ya the motor was on point no break up or nothing took the nitrous good just got to get that twice out
Nick, nothing but str8 🔥 buddy!....can you disclose any internal mods done to this 6.0... (like pistons, rod's, compression ratio, carb size, cylinder head size) and is that with a power glide transmission?
It’s Wisco pistons 12.1 and the heads are AFR 225 and the carb is ARD carberater build for his motor and a turbo 400 transmission with a transbrake
Nice to see a Monte on here. Runs good too 👍
Thanks buddy for watching and all your support
Dang, Nick that Chevy is gonna kick some butt!!! 😎
Thanks buddy for the support ya it sould be fast when we get the twist out of it
He got something broke with all that movement on a 200 shot
He needs coilovers or something
@@tyronealle.6799 No buddy put a anti roll bar on the car and it stopped all that twisting it doesn’t do that any more Thanks buddy for watching the channel and for all your support
That thang is TWISTIN
Ya it was g body shuffle baby
Get sub frame connecters under there if not aready and roll cage if not it help with that twist might have get that under side stiffened up bout say With that anti roll bar It be a best nice ride I love muscle 💯 can’t wait see it leave straight
Thanks buddy for your support ya we going to try to get it right the anti roll bar going to help it alot
@@Nicksperformanceauto good luck on it can’t wait see it rip up track 💯
Yeah man! That's what's up! Nice build.
Thanks Paul buddy for all your support that’s what keep me going
@@Nicksperformanceauto Imma keep watching Nick!
@@PorkChop1956 I really do appreciate it buddy
How many seconds you have on the progressive in the 2nd run
About 1.2 seconds of the hit Thanks buddy for watching and your support
Damn Nick get that twist out and it will be Awesome!!!
Yes it will Stan buddy that thing is wicked ya it got to have a anti roll bar
GET OFF! S-10!...with your bad self! Proud of my boy Nick, he works hard for performance name!
Thanks buddy for all your support u been by my side for a while now and I appreciate it
Is that a 5.3 cutting up like that?
No that’s a 6.0 buddy on 200 shot
Thanks for your support
@@Nicksperformanceauto iron block 6.0 or aluminum block 6.0
The Homie E 💪💪💪
Thanks buddy for your support I sure do appreciate it
She sounds lovely
Thanks buddy for your support They are black widow muffers
Needs that rear sway bar swap!!!
Ya we getting ready to put a anti roll bar on it to take the twist out of it
Dam she leavn thoe bit yea does ND a anti roll bar but good job on the build nick
Thanks Paul buddy am proud of myself buddy makes u feel good when you build something and it’s turns out good
What mufflers are you using?
Them black widow muffers
I’m looking for a street build like this Geesh!!! I have a 83 mc clean as hell. Where you guys located? I’m in Alamance county 💪🏾💪🏾
Am located in Fayetteville nc ya I can sure build u one I build that complete car
If you could send me your contact information so we can link up and get some numbers. Thanks!!
That's a badass MC. Can you tell me the sizes of the front wheels and tires?
The rims are 17 /4 inch wheels with a 205 /75 -17 tire thanks buddy for your support ya it’s just going to get bader when we put the anti roll bar on it
@Nicks performance & auto Awesome man thanks for replying! Yessir it sounds Killer. Keep up the good work fellas
@@spraym88 thanks buddy I will and thanks again for your support
Hello Nick I was trying to see if you had time to build the motor mounts for me?
Am just about done with them I try to finish them this week
Hello Nick did you have time to finish the mounts for me?
@@patrickjackson4789 am just about finished with them buddy am been busy
Mfker caught a whiff at that 600ft😤😤
lol ya it did That’s a bad little motor on Nitrous Thanks buddy for watching and all your support
Put an air shock on the right side rear 👍🚩
Thanks buddy for your support ya we about to put a anti roll bar on it
That thing bad
Thanks Kenny buddy for your support buddy ya the car did really good
Nice hit,what track is this?
It’s a track near Roland Nc called 710 dragstrip
Man thinks for showing us wat a real street car look 👍 nice built
Thanks ray buddy for your support that’s a true street car there
What kind of rear end you got in it
It has a build 9 inch ford rearend from quick performance in it thanks for all your support
😎😎😎😎😎😎😎😎😎😎😎😎
Thanks buddy for your support
6.0 with what cam?
It’s a Brian tooley cam 633/615 nitrous cam thanks for your support
@@Nicksperformanceauto appreciate that
@@antoniocrisco7219 u welcome buddy
Why does the car twist like that? Can someone explain?
What happens is the body is twisting from the power of the motor so u have to put a piece on the rear end and weld it to the frame of the car and it stops it from twisting
Thanks for asking buddy that’s how u learn
That's the G body shuffle
Hey at least it's hookin
Ya it is buddy it is hooking just got to get the twice out of it
@@Nicksperformanceauto this guy doing something similar to you guys
ua-cam.com/video/vga-eZorwE0/v-deo.html
Well turn it on then 😂😂😂
thanks buddy for your support ya we trying to get it right
Hey
Thanks buddy
Where you located
Am in Fayetteville NC buddy
@@Nicksperformanceauto how much for engine work meaning as tune & rear end work , I love the way the cars leave that line . I have sbc 385 stroker and 400 tran 3:73 gears
@@chevyboy855 just call me 910-824-5051
What mufflers are those
3 inch pipe black widow muffers
What series black widow mufflers are those
@@lilrobert198527 1chamber black widow
@@lilrobert198527 1 series thanks for your support
@@Nicksperformanceauto I just had a gen4 6.0 and wanted a different sound
Hit it from home
Thanks buddy for your support buddy
@@Nicksperformanceauto np. That's how some people are. All out testing and they downing y'all that not a real racer
@@Nicksperformanceauto his comment tells you he's not a real racer or tells you he's not real fast. Cause you can build two of the same cars one might work the other might not
@@BrainHoper ya that’s true every car is different some faster some is slower
@@BrainHoper ya that’s true buddy
Looks mean but needs some help in the suspension area
Thanks for the support buddy ya we about to put a anti roll bar on it not going to run it no more to we get one
Do you sit like it
@@BrainHoper yes, but I have a roll cage because of the tracks up my way are strict. Full interior 3600 lb gbody
@@fastvsix ok well that car just coming out so they gotta figure things out. But I got a Monte 4000 plus pounds with me in it all steel sbc with a peanut 350 on one gun No computers a play small carb what you wanna do
@@fastvsix 😅😂😅😂