Great Information Johnson and please make a video Acopos Drive works with Torque to start and stop the motor once the torque is achieved. Thanks for the great videos.
My friend I'm doing the first test as shown in the video. The next day when I went to test without changing anything the Ax1 led was flashing green. According to the manual, I checked the Enable contact pins and I checked the connections. But I can no longer work while the led is blinking.
Hi, your videos are very helpful. Could you please make a video on how to program a 3-axis gantry with Virtual Motion Control (for people who don't have hardware)?
hello dear, i need your help. i have B &R power panel 4pp065.0571. but its restarting itself again and again. i want to replace its panel but i am worry how i will copy the exisintg software in new panel. although I have a 512MB card installed with it. Can i copy a software from that drive
Hi sir I reset may X20CP3586 and now I am facing Run Time issue project is in B4. 90 and PLC is in Boot Mode and shows Ar version J4.03 How to fix it Can you please help me ?
in the project menu you can change runtimes choose a proper one or install diffrent ones which are suitable for your case, for extra help ask at your b&r vendor which runtime is recommended and works for your case.
Hello Taoufiq, You do have to get a license for Automation Studio. Check out this UA-cam video I created on how to get the software downloaded: ua-cam.com/video/ElXEVbMKMlc/v-deo.html Once you have it downloaded you will need to go to this B&R website to register for your 90 day free trial: www.br-automation.com/en-us/service/software-registration/ I would suggest getting in touch with your local B&R office to get more information. Good Luck!
Great Information Johnson and please make a video Acopos Drive works with Torque to start and stop the motor once the torque is achieved. Thanks for the great videos.
The information you give is very useful.
Please teach us how to create a Cam in Automation studio.
This is a great work, very useful and thanks for it, indeed I am working on it , greetings.
My friend I'm doing the first test as shown in the video. The next day when I went to test without changing anything the Ax1 led was flashing green. According to the manual, I checked the Enable contact pins and I checked the connections. But I can no longer work while the led is blinking.
i bught a new acopos p3 to replace an older one, can i install it without programming ? are they have a program inside ?
Hi, your videos are very helpful. Could you please make a video on how to program a 3-axis gantry with Virtual Motion Control (for people who don't have hardware)?
Thanks for the feedback! I will consider that as a future topic!
Good night. Are you about the RUC? there use to upload of variables! This is correct? Thanks
Good
Hello, how do I get this program? is there any demo, to run small tests?
Hello Mr. Brent. Would you please help me with a simple start and stop project to run an induction motor with an Acopos 1045 drive. Thank you.
+++!
Good morning, how can I add an 8AC112.60-1 card to the project?
hello dear, i need your help. i have B &R power panel 4pp065.0571. but its restarting itself again and again. i want to replace its panel but i am worry how i will copy the exisintg software in new panel. although I have a 512MB card installed with it. Can i copy a software from that drive
Hi, can i run b&r servo drive with third party motor . Help me plzz
hola amigo tengo un acopos 100d lo puedo usar con arduino?y match3?
sir can you explain how to add image?
Could you send me a simulate software download link for windows 11
Hi sir
I reset may X20CP3586 and now I am facing Run Time issue project is in B4. 90 and PLC is in Boot Mode and shows Ar version J4.03
How to fix it
Can you please help me ?
in the project menu you can change runtimes choose a proper one or install diffrent ones which are suitable for your case, for extra help ask at your b&r vendor which runtime is recommended and works for your case.
How to use new CF card make a backup and bottable
Hanzhen harmonic drive gear , robot arm gear , joint acurator , over 30 years experience
I need to a licence or crack for automation stiodo, any help?
u can get one for free on their website only 90 days though
How long
How to upload project file from PLC ?
Hello, it is not possible to upload a project from a B&R PLC. You will need to contact the original person who created the project to get it.
Hello Taoufiq,
You do have to get a license for Automation Studio. Check out this UA-cam video I created on how to get the software downloaded:
ua-cam.com/video/ElXEVbMKMlc/v-deo.html
Once you have it downloaded you will need to go to this B&R website to register for your 90 day free trial:
www.br-automation.com/en-us/service/software-registration/
I would suggest getting in touch with your local B&R office to get more information.
Good Luck!