Looks great man, what was the ballpark labor hrs on that if you don’t mind me asking? I run the T⚡️9.5 pullbacks. -Breakline if you barely crack it lose & rotate & crank it back down you shouldnt lose a drop but have a rag under it just in case.
@@jjpro20021 no, I still have the stock breather. It would give you a little more power but not required. I did have to get a tuner with the pipe though. I plan on adding a trask breather soon.
Your video got me pretty interested in the Sawicki exhaust. I have a couple of questions. How are you liking the heat shields, and did you need to get the floorboard spacers? It looks like you got a straight and a curved heat shield, and I was curious if you felt like they were worth the cost.
@@ryanweigler5835 in my opinion, you don’t really need the heat shields mainly because one only lasted like three days before it fell off and I lost it somewhere on the road so I just took the other one off and I run it without the heat shields it seems to do just fine as long as you don’t put your feet on it and melt your shoesas far as the sound I love it sounds great but if you do get it, make sure you get the full length my buddy has the mid length pipe and it is obnoxiously loud cause it’s right next to you and not all the way at the back
Thank you for your quick reply! I hope you’re still really liking those pipes! I’ve been torn between them and the new pipes from Siouxicide Choppers. I like the stainless look, and both sound really good.
Check out the Bassani 2 into 1 full length It’s black ceramic and looks amazing I have on my CVO ST. Not a fan of the unfinished tin look of that exhaust. And heat shields an after thought.
Just subscribed and gave you a like. I have the CVO ST and waiting on the Thrashing mid bend bars and the Sawicki short 2 in to 1 to come in so I can make a video on it as well. The quietness is killing me. How long did it take to get your pipes?
@@TheVeroneeLife I found two part numbers. 930-01220 and 930-01220-VVT. Do you know what part number you have? J and P has the 930-01220 in stock, I'm just onshore of what is correct. Where did you get yours? I've been waiting 3 weeks.
just curious how tall are you im about 6'3 but short legged I want to do t bars bad because I ride hard but afraid with the angle of the upper tree the will feel like they are in my chest.
@@TheVeroneeLife hoping to do 10" risers and high bends and get me somewhere between a 12 and 14 inch bar. Ive liked my apes pushed forward in the past just trying to get me as far away as possible with my gorilla arms.
We love Sawicki Speed. That is why we carry them on our website. Excellent performance, sound, lifetime warranty and made in America.
YES, AWESOME PIPE!
Sounds good! Once they have a tuning available a good cam will sound even better!
When you change your exhaust did you have to get your bike re-tuned?
Sounds great! Did you do a cam job? Searching for pipes for the new CVO ST. Thanks!
No cam job yet! Look at the Sawicki speed pipes for the cvo st, sounds real good on both, the 117 or the 121
Looks great man, what was the ballpark labor hrs on that if you don’t mind me asking? I run the T⚡️9.5 pullbacks. -Breakline if you barely crack it lose & rotate & crank it back down you shouldnt lose a drop but have a rag under it just in case.
Awesome looking bike man and great set up 🔥
Thanks bro
Question- I love this pipe , do I need to change the air breather to have this pipe .?
@@jjpro20021 no, I still have the stock breather. It would give you a little more power but not required. I did have to get a tuner with the pipe though. I plan on adding a trask breather soon.
Your video got me pretty interested in the Sawicki exhaust. I have a couple of questions. How are you liking the heat shields, and did you need to get the floorboard spacers? It looks like you got a straight and a curved heat shield, and I was curious if you felt like they were worth the cost.
@@ryanweigler5835 in my opinion, you don’t really need the heat shields mainly because one only lasted like three days before it fell off and I lost it somewhere on the road so I just took the other one off and I run it without the heat shields it seems to do just fine as long as you don’t put your feet on it and melt your shoesas far as the sound I love it sounds great but if you do get it, make sure you get the full length my buddy has the mid length pipe and it is obnoxiously loud cause it’s right next to you and not all the way at the back
Oh and no floorboard spacers were needed. Never really even heard of those before actually.
Thank you for your quick reply! I hope you’re still really liking those pipes! I’ve been torn between them and the new pipes from Siouxicide Choppers. I like the stainless look, and both sound really good.
I seen you have the screaming eagle sticker. Care to share how you did that? Paint or decal?
Check out the Bassani 2 into 1 full length It’s black ceramic and looks amazing I have on my CVO ST. Not a fan of the unfinished tin look of that exhaust. And heat shields an after thought.
Think ill keep what I got since I picked it out and had it installed.
I have a dp cvo rg and don't want tin industrial look either. I am looking for a nice black any pics? thanks
Monster!! Sound amazing!! 🔥
Thanks
I’ve been considering a t bar setup as well. Just curious how tall you are!? I’m 6’7”. Thanks bud
@@bubbasmith1912 6-4
I typically like the sound of 2 into 2 better, but that Sawicki sounds great! It just might convert me:) Did your dealer install a tune as well?
They installed the screaming eagle pro street tuner.
Looks and sounds good 😎👍👍
Just subscribed and gave you a like. I have the CVO ST and waiting on the Thrashing mid bend bars and the Sawicki short 2 in to 1 to come in so I can make a video on it as well. The quietness is killing me. How long did it take to get your pipes?
A week or so
@@TheVeroneeLife I found two part numbers. 930-01220 and 930-01220-VVT. Do you know what part number you have? J and P has the 930-01220 in stock, I'm just onshore of what is correct. Where did you get yours? I've been waiting 3 weeks.
@@StrickPerformance idk the numbers, came from timms harley
just curious how tall are you im about 6'3 but short legged I want to do t bars bad because I ride hard but afraid with the angle of the upper tree the will feel like they are in my chest.
@@calebgodwin3224 6’4” got with the straight riser, real comfy
@@TheVeroneeLife hoping to do 10" risers and high bends and get me somewhere between a 12 and 14 inch bar. Ive liked my apes pushed forward in the past just trying to get me as far away as possible with my gorilla arms.
Nice that exhausted is like 2k 😱
It was like 1500
Looks great, sounds great, win win! Bodean52 recommended your channel.
Sounds amazing
Wow! What a great tone those have. Well done sir. Just sub’d, BoDean52 sent me!
Ive watched you stuff! Thanks for the sub! I returned the favor as well.
Just subscribed bud and a thumbs 👍🏻⤴️
Thank you for the support!
Is this the stock cam?
@@MrMurphc13 yep
@TheVeroneeLife That sounds sweet man.I might have to get one myself.
@ you wont regret it!
Sounds great