Может в опресовке разъёма под капотом падали эти 50 Ом ??? Почему чисто провода не проверили ? Неужели коса повреждена ??? Если коса повреждена, дак ещё чего пойдёт валиться ? Ну а так конечно полезное видео. Спасибо. Смотрю с удовольствием всё. У самого е150 corolla с роботом. И тоже много чего восстанавливаю и канал Ваш помогает очень. Ещё раз спасибо за инфу и труды. Сам автоэлектрик с 1998г ).
Да, возможно. Были моменты, менял фишку, но по итогу когда провода поменял, всё прошло. Теперь для пущей уверенности, поменял все и забыл. Тут важно чтоб все было прям одинаковое - всё, все провода, иначе небольшая разница и ошибка.
@@vak_service Это да. Тогда идеально когда новая коса. Это точняк, если всё сделать красиво технически. Тем более сам путь короткий и всё удобно пристегнуть и по штату.
Hi mate this is brilliant, I have 2006 Yaris semi automatic, I had issue some times gear is not working just showing N-neutral . Is it going to be same problem or what are you going to suggest?
hi your videis is very good . I have corolla silver d4d sometimes the get flashin and did not shift any gear After a few minutes, this situation goes away and get drived . its dont have any DTC . Could the cause be mechanical? for example clutch disk or release bearing ?
i have toyota aygo semi automatic it peeps when i put foot on gas and the peep disappear when i remove my foot from the gas . i see nothong on dashboard . do you know what might be the problem ?
Really have a problem with my car it's a Toyota corolla Verso 2008 at one point my car was driving and stop like you said about the one you just fixed I take it to get it diagnosed on the way I of to go up a hill and I of to give it extra gas I'm doing so I heard a load explosion from the engine I had to get something to pull the car home later that day I pulled the transmission down and the pressure plate was broken in three pieces I went and got a pressure plate and clutch replace it and now ever since I did the car is not going in any gear and when you start it it's not taking the rev what is your take on this pls 🙏??
It is because the learning is fault. You need to make the learning, if it will done good - all will come back. But all mechanical must be ok, if something wrong the learning will no start.
Hi we have a mmt hydralic clutch actuator on a yaris old shape when u put it on e on the dash there is no gear 1 sign comming up tiptronic gear 1 sign comes up it moves very very slowly front and back its done 130000 any direction of help thanks
Hi mate. This is brilliant. I have a car exactly same model and engine 1.4 D4D MMT. It is keep giving P0915 and goes into neutral. Then you have to switch car off then on again. I changed the actuator motors because I thought this was the problem but it wasn’t. So now I’m still trying find out what the problem is and found your video which is amazing by the way. So my question is, did you just replace the wiring with connector plugs or Did you replace the sensors as well? Thank you
What language you need? You can change it on top on right side of page: toyota--corolla-ru.translate.goog/rm04f1ru/repair2/html/contents/rm0000017yj00cx.html?_x_tr_sl=ru&_x_tr_tl=en&_x_tr_hl=ru&_x_tr_pto=wapp toyota--corolla-ru.translate.goog/rm04f1ru/repair2/html/frame_rm0000017yi00cx.html?_x_tr_sl=ru&_x_tr_tl=en&_x_tr_hl=ru&_x_tr_pto=wapp
Ok Follow next link, you can choose any language to translate on top of the page toyota--corolla-ru.translate.goog/rm04f1ru/repair2/html/contents/rm0000017y800cx.html?_x_tr_sl=ru&_x_tr_tl=en&_x_tr_hl=ru&_x_tr_pto=wapp
Hi man, I have problem with aygo mmt car drives normal and after some time gear light shows up and car wont take acceleration and is stuck in gear, and then car need to be switched off until light clears it self after some time and then you can drive a car for some time and then same happens again. Tried manual relearning sequence didn't help. For some reason cant pull dtc with delphi diag only from gear box module, and I am waiting for the mini vci cable now. Can you help me with workshop manual cant find it ? Thanks Cheers!
@@stefand5143 p0920 - one of electrical motor on gears actuator not good. toyota--corolla-ru.translate.goog/rm04f1ru/repair2/html/contents/rm0000017yf00cx.html?_x_tr_sl=ru&_x_tr_tl=en&_x_tr_hl=ru&_x_tr_pto=wapp
@@vak_service I removed shift motor, checked it brushes ok, bearings ok, motor works when put on battery in both ways. Connector was cracked a little bit. Can that be a problem?? I will check for resistance later. Thanks for help!
I changed the mmt transmission to a normal 6 speed manual transmission and the car goes match better and much faster through the gears. If any one want more info on what was changed please let me know and I'll be happy to assist
I am having an issue with my Toyota corolla verso semi automatic transmission now after I changed the cluch kit and new actuator. Now the sign in the dash board disappeared
Hi ,guy i have a 2009 Toyota corolla 1.6 mmt,im planning on changing it to a normal manual set up,,if anyone can please help ,,im not sure about the challenges i might face, especially that the engine control unit is linked to the tcm. Please assist thanks Desigen from south African...
Eres una maquina gracias por compartir tus conocemientos
Thank you!
Может в опресовке разъёма под капотом падали эти 50 Ом ??? Почему чисто провода не проверили ? Неужели коса повреждена ??? Если коса повреждена, дак ещё чего пойдёт валиться ?
Ну а так конечно полезное видео. Спасибо. Смотрю с удовольствием всё. У самого е150 corolla с роботом. И тоже много чего восстанавливаю и канал Ваш помогает очень. Ещё раз спасибо за инфу и труды. Сам автоэлектрик с 1998г ).
Да, возможно.
Были моменты, менял фишку, но по итогу когда провода поменял, всё прошло.
Теперь для пущей уверенности, поменял все и забыл.
Тут важно чтоб все было прям одинаковое - всё, все провода, иначе небольшая разница и ошибка.
@@vak_service Это да. Тогда идеально когда новая коса. Это точняк, если всё сделать красиво технически. Тем более сам путь короткий и всё удобно пристегнуть и по штату.
Love the videos, on the rhd version is ecm above steering wheel
Yes, on RHD diferent place location
Hi mate this is brilliant, I have 2006 Yaris semi automatic, I had issue some times gear is not working just showing N-neutral . Is it going to be same problem or what are you going to suggest?
Need to know trouble code, follow this video to check trouble code
ua-cam.com/video/8ypF55Q-NTU/v-deo.html
hi
your videis is very good .
I have corolla silver d4d sometimes the get flashin and did not shift any gear After a few minutes, this situation goes away and get drived .
its dont have any DTC .
Could the cause be mechanical? for example clutch disk or release bearing ?
Hi.
If the car stop driving and N flashing and the red gear is light on on dashboard - must be the DTC.
Check it again, check dtc in gearbox.
i have toyota aygo semi automatic it peeps when i put foot on gas and the peep disappear when i remove my foot from the gas . i see nothong on dashboard . do you know what might be the problem ?
Make a video how it looks and send to me
Really have a problem with my car it's a Toyota corolla Verso 2008 at one point my car was driving and stop like you said about the one you just fixed I take it to get it diagnosed on the way I of to go up a hill and I of to give it extra gas I'm doing so I heard a load explosion from the engine I had to get something to pull the car home later that day I pulled the transmission down and the pressure plate was broken in three pieces I went and got a pressure plate and clutch replace it and now ever since I did the car is not going in any gear and when you start it it's not taking the rev what is your take on this pls 🙏??
It is because the learning is fault.
You need to make the learning, if it will done good - all will come back.
But all mechanical must be ok, if something wrong the learning will no start.
@@vak_service what is the learning how do I make sure the learning this good?
@@vak_service appreciate your time but I really don't know much about cars I am just learning here
@@vak_service what must I do to correct the learning fault
Hi we have a mmt hydralic clutch actuator on a yaris old shape when u put it on e on the dash there is no gear 1 sign comming up tiptronic gear 1 sign comes up it moves very very slowly front and back its done 130000 any direction of help thanks
Hi.
Make a video and send me to whatsapp
Thank u it was very nice God bless u
+
Hi mate. This is brilliant. I have a car exactly same model and engine 1.4 D4D MMT. It is keep giving P0915 and goes into neutral. Then you have to switch car off then on again. I changed the actuator motors because I thought this was the problem but it wasn’t. So now I’m still trying find out what the problem is and found your video which is amazing by the way. So my question is, did you just replace the wiring with connector plugs or Did you replace the sensors as well? Thank you
Hi.
I was changing sensors before and it was no help.
By the end i just changed wires and connector plugs.
Thank you for reply.
Please i want to ask, how am i going to connect the laptop with the car to use techstream ?
ua-cam.com/video/Oeb__Scm6To/v-deo.html
you need adapter "Mini VCI"
Thank you for sharing you knowledge it is very helpful, can you share the document in the video at 4min50seconds ?
What language you need?
You can change it on top on right side of page:
toyota--corolla-ru.translate.goog/rm04f1ru/repair2/html/contents/rm0000017yj00cx.html?_x_tr_sl=ru&_x_tr_tl=en&_x_tr_hl=ru&_x_tr_pto=wapp
toyota--corolla-ru.translate.goog/rm04f1ru/repair2/html/frame_rm0000017yi00cx.html?_x_tr_sl=ru&_x_tr_tl=en&_x_tr_hl=ru&_x_tr_pto=wapp
@@vak_service thank you , you are a legend
@@Cheikh-xs9il 🙂👍
My Frd hemp me I pay u ? My gear n missing in dash. Never bk. What problem. How to do it manually. By hand
+
please, can you make a vide about p0820 problem.?
Ok
Follow next link, you can choose any language to translate on top of the page
toyota--corolla-ru.translate.goog/rm04f1ru/repair2/html/contents/rm0000017y800cx.html?_x_tr_sl=ru&_x_tr_tl=en&_x_tr_hl=ru&_x_tr_pto=wapp
Hi man, I have problem with aygo mmt car drives normal and after some time gear light shows up and car wont take acceleration and is stuck in gear, and then car need to be switched off until light clears it self after some time and then you can drive a car for some time and then same happens again.
Tried manual relearning sequence didn't help.
For some reason cant pull dtc with delphi diag only from gear box module, and I am waiting for the mini vci cable now.
Can you help me with workshop manual cant find it ?
Thanks Cheers!
Hi. Check what trouble codes.
@@vak_service HI code is p0920
@@stefand5143 p0920 - one of electrical motor on gears actuator not good.
toyota--corolla-ru.translate.goog/rm04f1ru/repair2/html/contents/rm0000017yf00cx.html?_x_tr_sl=ru&_x_tr_tl=en&_x_tr_hl=ru&_x_tr_pto=wapp
@@vak_service I removed shift motor, checked it brushes ok, bearings ok, motor works when put on battery in both ways.
Connector was cracked a little bit. Can that be a problem??
I will check for resistance later.
Thanks for help!
And car wire connector is ok, no rust, no broken wires everything is ok
I changed the mmt transmission to a normal 6 speed manual transmission and the car goes match better and much faster through the gears. If any one want more info on what was changed please let me know and I'll be happy to assist
Hi mate can you help , I have same gear issue , it’s semi automatic gearbox 2007 yaris
A
Hi mine I try to fix it 20 days still not. I try clam Cluch and stand. I try stand clam big headche
+
I am having an issue with my Toyota corolla verso semi automatic transmission now after I changed the cluch kit and new actuator. Now the sign in the dash board disappeared
I have checked the TCM Computer and seems has got one resistance burned. Needs check and repair
Hello.
Send it to me, will help you.
Hi
How are you? I had a problem with my ECU gearbox do you can’t repeat it
Hi ,guy i have a 2009 Toyota corolla 1.6 mmt,im planning on changing it to a normal manual set up,,if anyone can please help ,,im not sure about the challenges i might face, especially that the engine control unit is linked to the tcm.
Please assist thanks
Desigen from south African...
Hi.
How to downlowd software please
Regards
You need techstream, it is alot on uttorent sites