Hello Sergio - I have a question. the RadioLink AT10 comes with the R10D receiver. Did you purchase the R9D receiver separately? Did you have to do anything special to sync it to the R9D receiver?
Hello. I have an AT9S Pro with R9DS S-Bus enabled connected to a NAZA-M Lite. After much fiddling I was able to progam the ESC's and setup my transmitter (thank you millions for your video). However, when my throttle is all the way down all four motors are still spinning about 1/2 speed. When I throttle up I can hear the motors going to full speed. All telemetry looks good. When I connect the ESCs directly to the R9DS channel 3 (throttle) the motors turn off with throttle all the way down and spin to full speed with the throttle at max. So, I know this is a NASA configuration issue...I just do not know where to begin the tweakage. Can you please give me a shove in the right direction Sir? Thanks!
Dear Sergio. Will the transmitter AT10 in the current setup with NAZA flight controller and R9D receiver module show in real flight basic telemetry data: altitude, distance, flight direction ? Could you help me, please! I am a structural engineer and may help you in drone frame design, if you need.
Hi Sergio your very knowledgeable in the radiolink brand,I have an AT10 but I'm having a problem with the wiring from the R10D to the Naza M Lite (MC).Not sure where should I plug in U,X1,X2 into R10D. I appreciate any help I'm stuck. Thanks Happy Holidays
Hi, are all 10 channels configurable on the flightcontroller? I have a AT10 + R9D + Sbus SPRacingF3 + Cleanflight and can only use 8 channels, but when I start the servotest routine on the radio, all 10 channels are reacting on the flightcontroller, so I think the problem might be the radio
Hi. Once you have toggled the s-bus on the R9D , can the other channels be used? Let's say i have retracts or led lights i want to put on a switch . can this be done if s-bus is on?
Olá Luciano. E só fazer upgrade com o novo firmware. na descrição do video tem um link para o novo firmware do AT9. Depois de fazer o upgrade tem a possibilidade de trocar a cor, no menu. Eu fiz um video a explicar como se faz o upgrade ao AT9. É só seguir as instruções. Se tiver dificuldade em entender inglês, diga que eu explico em português. Abraço
Hi. I'll be releasing a new firmware for the AT10. Not Beta. It's final with some improvements regarding resolution, epa, algorithms, and some general software changes as backlight setup amongst others.
Thank you. When will you release the final firmware for the AT10? Where will it be possible to download it? And do you recommend me to upgrade the firmware? Thanks for our answer.
Dear Sergio. Will the transmitter AT10 in the current setup with NAZA flight controller and R9D receiver module show in real flight basic telemetry data: altitude, distance, flight direction ? Could you help me, please! I am a structural engineer and may help you in drone frame design, if you need.
Hello Sergio - I have a question. the RadioLink AT10 comes with the R10D receiver. Did you purchase the R9D receiver separately? Did you have to do anything special to sync it to the R9D receiver?
Hello. I have an AT9S Pro with R9DS S-Bus enabled connected to a NAZA-M Lite. After much fiddling I was able to progam the ESC's and setup my transmitter (thank you millions for your video). However, when my throttle is all the way down all four motors are still spinning about 1/2 speed. When I throttle up I can hear the motors going to full speed. All telemetry looks good. When I connect the ESCs directly to the R9DS channel 3 (throttle) the motors turn off with throttle all the way down and spin to full speed with the throttle at max. So, I know this is a NASA configuration issue...I just do not know where to begin the tweakage. Can you please give me a shove in the right direction Sir? Thanks!
Dear Sergio.
Will the transmitter AT10 in the current setup with NAZA flight controller and R9D receiver module show in real flight basic telemetry data: altitude, distance, flight direction ?
Could you help me, please!
I am a structural engineer and may help you in drone frame design, if you need.
Hello Sergio, very good video, wonder if you have already a video for setup dji a3? thanks dji a2?
Hi Sergio your very knowledgeable in the radiolink brand,I have an AT10 but I'm having a problem with the wiring from the R10D to the Naza M Lite (MC).Not sure where should I plug in U,X1,X2 into R10D. I appreciate any help I'm stuck. Thanks Happy Holidays
Hi, are all 10 channels configurable on the flightcontroller? I have a AT10 + R9D + Sbus SPRacingF3 + Cleanflight and can only use 8 channels, but when I start the servotest routine on the radio, all 10 channels are reacting on the flightcontroller, so I think the problem might be the radio
Hi. Once you have toggled the s-bus on the R9D , can the other channels be used? Let's say i have retracts or led lights i want to put on a switch . can this be done if s-bus is on?
спасибо!..thank you!
friend to use rd9? because the rd10 does not support sbus, or does it?
olá sergio como fez pra tela do seu at10 ficar assim na cor branca,tenho um at9 gostaria de fazer no meu!!!
Olá Luciano. E só fazer upgrade com o novo firmware. na descrição do video tem um link para o novo firmware do AT9. Depois de fazer o upgrade tem a possibilidade de trocar a cor, no menu. Eu fiz um video a explicar como se faz o upgrade ao AT9. É só seguir as instruções. Se tiver dificuldade em entender inglês, diga que eu explico em português. Abraço
Hello,
what is the different between the default and BETA firmware for AT10?
Hi. I'll be releasing a new firmware for the AT10. Not Beta. It's final with some improvements regarding resolution, epa, algorithms, and some general software changes as backlight setup amongst others.
Thank you. When will you release the final firmware for the AT10? Where will it be possible to download it?
And do you recommend me to upgrade the firmware? Thanks for our answer.
+Lukáš Mirtes I always recommend people to upgrade their radios. I'll post a link in the description fir download later today.
Hello Sergio, do you have any news about the new firmware for AT 10?
Aew Sergio,
entre o AT9 e AT10, as diferenças são relevantes para investir no AT10 ???
Comprou onde ???
+Julio Ehret Olá Julio,
eu acho que fica melhor servido com o AT9. Os plásticos são melhores e a ergonómica do rádio é bem melhor. Comprei em Espanha.
Comprou em Site ou InLoco ???
+Julio Ehret comprei em site espanhol.
R10D does not support s-bus or PPM?
ok quero que sua ajuda pra fazer no meu at9
r10d not Sbus
Dear Sergio.
Will the transmitter AT10 in the current setup with NAZA flight controller and R9D receiver module show in real flight basic telemetry data: altitude, distance, flight direction ?
Could you help me, please!
I am a structural engineer and may help you in drone frame design, if you need.