This reminded me of some old memories, this was my first blaster and I always used it as my primary because we didn't have a big selection back when I bought this (it was actually a Christmas present). Thank you for bringing back these memories.
Wow Cap! These assembly guides have really been fantastic! Not only is it the best view of the inside of these blasters at all stages, but your instruction has been invaluable. I understand so much more about what I am doing inside them just by getting a clear view of how it all functions and your verbalization of the part and what it is for make it so much clearer. I take things apart and try to put them back together properly and it will usually work out eventually, but something in your explanations takes what I do naturally to what I do consciously. Thank you sir!
Useful to this day - I only now got a set, years after release, and I'm VERY glad to have this video (and others like it!), as I wouldn't have gotten mine back together and working without much time and frustration if not for having it. Thank you!
my brother got me a pair of the zombie strike magnus, and we were having a nerf war but it was when I was like 5 so I was to weak to prime the blaster, so I'm just going "TIME OUT TIME OUT" trying to prime the thing and my brother shoots and knocks my tooth out. good times.
Thank you sir. I'm building a Stryfle Mk2 and the little orange slide lock piece you installed first had me perplexed as to which way the hook should face. I unscrewed it with the internals still in hoping to just remove the slide for cutting.
I'm eying-up one of my Magnuses (Magni?) in preparation for a masterkey integration, so the "Don't cut the slide back too much!" advice is especially useful! I'll have to ponder the lock removal options and whether I should look into a more powerful spring though. Thanks Captain!
Hi! In my Magnus the firs part of the trigger sistem that you install in the reassembly was broken a long time ago, and I still without a solution 😢 Any idea?
@tiagodetez128 unfortunately, when it comes to physically broken parts, unless you can replace them from another blaster or fabricate them, you are pretty much out of luck.
Hey, I'm trying to take apart my magnus but the left side of the housing seems stuck to that white mechanism to wards the rear. It feels like its still screwed in right where the trigger is where there are no screws. Any advise would be great
I got nothing. I'd check for screws you might have missed. Carefully pry/probe with something that won't mar the shell and try to narrow down where it is stuck.
@@CaptainXavier Holy crap, you've earned my respect for replying to a 2 year old video with in 10 min Also looking close I think I see the point where it connected but there are no screw holes visible
@CaptainXavier It's right about where the curved part of the trigger starts. Im also currently wonder how hard it would be to just break that white assembly in the center then 3d a replacement
@@CaptainXavier The left side of the slide is 100% off. everything that could be removed is other than that left shell (it was interesting and a poor decision.) Barrel and barrel spring, internal mag parts, and the feed lips.
I think these are my favorite tutorial videos that you are doing currently. I dare say like them better than "Can it take a K26?"
This reminded me of some old memories, this was my first blaster and I always used it as my primary because we didn't have a big selection back when I bought this (it was actually a Christmas present). Thank you for bringing back these memories.
Excellent!
One more step closer to my own Stryfle,
Wow Cap! These assembly guides have really been fantastic! Not only is it the best view of the inside of these blasters at all stages, but your instruction has been invaluable. I understand so much more about what I am doing inside them just by getting a clear view of how it all functions and your verbalization of the part and what it is for make it so much clearer. I take things apart and try to put them back together properly and it will usually work out eventually, but something in your explanations takes what I do naturally to what I do consciously. Thank you sir!
Useful to this day - I only now got a set, years after release, and I'm VERY glad to have this video (and others like it!), as I wouldn't have gotten mine back together and working without much time and frustration if not for having it. Thank you!
my brother got me a pair of the zombie strike magnus, and we were having a nerf war but it was when I was like 5 so I was to weak to prime the blaster, so I'm just going "TIME OUT TIME OUT" trying to prime the thing and my brother shoots and knocks my tooth out.
good times.
Not possible, unless said tooth was already loose.
@@saberwing7930 it was, or maybe the shot had knocked it loose.
Another one of these, sweet!
These will be relevant till the end of time
ey i was about to modify one of these, thanks for putting this out before i ended up breaking something
LOL - I don't even have a Magnus, but watched this... Thanks Cap!
Same, but I still picked up a bag of two centurian mags, to make one mag fed
I now have two Magnus
Thank you sir. I'm building a Stryfle Mk2 and the little orange slide lock piece you installed first had me perplexed as to which way the hook should face. I unscrewed it with the internals still in hoping to just remove the slide for cutting.
I'm eying-up one of my Magnuses (Magni?) in preparation for a masterkey integration, so the "Don't cut the slide back too much!" advice is especially useful!
I'll have to ponder the lock removal options and whether I should look into a more powerful spring though.
Thanks Captain!
Awesome video series, I cant thank you enough!!
It breaks the dirt tooth lock assembly if the brake is not that bad you could possibly use super glue in rubber bands
Is the slide supposed to catch on the muzzle
Thanks your ability to explain and show are wonderful.
And how is a measurement of area used to measure vehicles?
...what?
@@CaptainXavier you said an acre of trains how many is that.
@@Eulemunin the number of trains you could fit on an acre of land.
This was helpful, cool video!
I have too, watched a 28 minute long video in 1 minute
@@rgordon1351 lmao 😂
Hi! In my Magnus the firs part of the trigger sistem that you install in the reassembly was broken a long time ago, and I still without a solution 😢
Any idea?
@tiagodetez128 unfortunately, when it comes to physically broken parts, unless you can replace them from another blaster or fabricate them, you are pretty much out of luck.
@@CaptainXavier 😕😕😕
Thank you!
I've been waiting for this one. Need to lube them up.
Hey, I'm trying to take apart my magnus but the left side of the housing seems stuck to that white mechanism to wards the rear. It feels like its still screwed in right where the trigger is where there are no screws. Any advise would be great
I got nothing. I'd check for screws you might have missed. Carefully pry/probe with something that won't mar the shell and try to narrow down where it is stuck.
@@CaptainXavier Holy crap, you've earned my respect for replying to a 2 year old video with in 10 min
Also looking close I think I see the point where it connected but there are no screw holes visible
@CaptainXavier It's right about where the curved part of the trigger starts. Im also currently wonder how hard it would be to just break that white assembly in the center then 3d a replacement
@@freemanking2517 weird. Are we talking about the left side of the priming slide or the left side of the shell?
@@CaptainXavier The left side of the slide is 100% off. everything that could be removed is other than that left shell (it was interesting and a poor decision.)
Barrel and barrel spring, internal mag parts, and the feed lips.
Can you mod a nerf perses and repaint it? Pls use yellow
Why yellow?
Big plunger for big power
Could you possibly put a link for that mat in the comments or tell me where the link for it is (if it's in another video)
Search Amazon.com for "magnetic mat"
@@CaptainXavier thanks
What spring can I use to upgrade?
The ones that are specifically made for it.
The spring is pretty powerful
My cousin had this and he bullied me a long time ago
hope you got a megaladon years later
👋🏻
I had one of those I would buily my brother
No.
hi i you nintendo video you on video nintendo 1 have