I have a 2011 Camaro convertible and was able to fish old seal out of the wall. I cleaned the old adhesive off the window and seal with alcohol. I adhered the seal back in place with windshield adhesive.
I searched on youtube for a couple of months on how to fix it and never found a video so i finally purchased the $200 window and then I see this. Hopefully i can return the window and just buy this. Thanks for the link
If you still have the one that fell off your window you could just glue it back. The reason I had to use these weatherstrips on mine is because mine fell off and got lost. And they don’t sell the strips separately from the window. Normally you have to get the window that comes with the strip.
Afternoon, I see your a popular guy seeing the comments below. He’s that linked work the product was ordered. I thank you sir for this. Hope you still have you Camaro. I know I do. Again appreciate your thoroughness in finding this product
I’ve never had more than 120 views ever and That was on Facebook. I looked for a solution for my car for months. Until I figure out how I can do it using this seal. I figured there were more people out there that had the same issue. So I made this video. 🙂
That sounds great and I appreciate you pointing this out and posting it but I tried for and hour looking on Amazon and can't seem to locate this exact one. Please help
Do you mind sharing the link for the seal you bought on Amazon? Both my my sides are missing as well. I mean 10 bucks is way cheaper then me buying another 2 sides of the whole part. Please and thank you
Hi thanks for the info! I was wondering how you took the outside black hard weatherstripping off of the body? I’m scared to break mine. Thanks again for sharing!
Can you make another video or show me how to actually install this device. I ordered it from the link you posted but I cannot get it to seal and stick like yours and also when I let the window down the seal will not go down with the window. Pls help
Honestly there’s a silicone part of the outside window trim that does brake/ bend with that seal window seal installation. But I’ve never had issues where the water goes in my car. But about the installation try to do the installation at night when it’s not too hot because the adhesive on the window seal will not stick very well when it’s really hot in the day time. also when you are done don’t put the window down for at least 24 -48 hours. This should solve your problem. Also in the beginning the window seal will not go up directly into the channel it’ll take some time before the window seal’s friction will be reduced. After that it’ll go straight into the channel and you won’t have an issue with it going up or down.
Hey man, how did this turn out? I have the same problem with my 13 vert. I replaced both sides cost me about $500, and i installed a 2014 window and the same exact thing happened. Either its a factory defect or the guy who put it together didnt use enough glue. Terrible manufacturers defect and GM wouldnt do a thing about it. Also I live in florida and it appears you do too, so I wonder if the humidity has something to do with it in the summer.
go to a glass place that replaces windshields and they glued mine for $25 and it has stayed for a year. Wish I had seen this video a week ago. I just ordered one for the drivers side. They have gone up to $450 each. I ordered a used one.
Your seal is likely inside the panel. Put your top half way down and look down inside the window crack. You might find it in there. That’s where mine was. Unless you had your windows up with the top down driving down the road. Chevy is raping people for this part making them buy a window they don’t need. What kind of crap glue did they use anyway? I’m furious about this! The current CEO of GM makes 30 Million a year and they can’t sell us just the seal? Shame on them!
Hey if you don’t mind can you send the link for the door seal ??
I have a 2011 Camaro convertible and was able to fish old seal out of the wall. I cleaned the old adhesive off the window and seal with alcohol. I adhered the seal back in place with windshield adhesive.
Hi. Which glue or adhesive did you used?
What is the name of adhesive?
That’s where mine was.
My passenger side came off today....
I searched on youtube for a couple of months on how to fix it and never found a video so i finally purchased the $200 window and then I see this. Hopefully i can return the window and just buy this. Thanks for the link
I Looked everywhere online for help and found nothing for the quarter window seal. So I came up with this.
I searched for a video like this too for months till I came up with this after trial and error.
Me too just purchased 6 minutes ago
Bro!!!! This is clutch for real! Thanks so much for sharing! My passenger side one just fell off today.
If you still have the one that fell off your window you could just glue it back. The reason I had to use these weatherstrips on mine is because mine fell off and got lost. And they don’t sell the strips separately from the window. Normally you have to get the window that comes with the strip.
It’s probably down in the body. Put your top half way down and look down in the crack where the window goes down. That’s where mine was.
@@MelissaTolle-o5k thanks! mine fell into my passenger seat.
Thank you so much. I cussed the dealership out because of this. Im ordering mine right now. God bless you
Afternoon,
I see your a popular guy seeing the comments below. He’s that linked work the product was ordered.
I thank you sir for this. Hope you still have you Camaro. I know I do.
Again appreciate your thoroughness in finding this product
I’ve never had more than 120 views ever and That was on Facebook. I looked for a solution for my car for months. Until I figure out how I can do it using this seal. I figured there were more people out there that had the same issue. So I made this video. 🙂
Do you have a link for the window seal on Amazon?
Yes i need that link also plz. At the dealer now and got quoted for $600+ for both window replacements. Id rather DIY it.
I found the parts on ebay. Pretty decent price
www.amazon.com/dp/B081Q3THZN/ref=cm_sw_r_sms_c_api_i_fOJ2EbMWEA1GD
www.amazon.com/dp/B081Q3THZN/ref=cm_sw_r_sms_c_api_i_fOJ2EbMWEA1GD
That sounds great and I appreciate you pointing this out and posting it but I tried for and hour looking on Amazon and can't seem to locate this exact one. Please help
Did you get a link, as I. Need it too
No not yet paid $200.00 for the driver's side window but I still want the link and description. Please help
Thank you so much for this video. You just saved me 800.00 :)
You’re welcome now where’s my cut lol 😂. JK
Thnx bro I been lookin everywhere
What is the name of the rubber on Amazon so I can order some?
Do you mind sharing the link for the seal you bought on Amazon? Both my my sides are missing as well. I mean 10 bucks is way cheaper then me buying another 2 sides of the whole part. Please and thank you
www.amazon.com/dp/B081Q3THZN/ref=cm_sw_r_sms_c_api_i_fOJ2EbMWEA1GD
Thank you so much because I was quoted $250 for the entire piece and your video is a sure pocket saver!
When is the link to the stuff you used? Mine fell off Tuesday
Hi thanks for the info! I was wondering how you took the outside black hard weatherstripping off of the body? I’m scared to break mine. Thanks again for sharing!
Thank you for sharing. My seals on mine just went bad.
Yay!! Thank you! How long did it last? Did you have any issues with leaking?
Thank you! I’m about to order this now.
whats the material name? where can i order it?
Thanks needed this just happened today !
What type door seal did you order on Amazon please?
www.amazon.com/dp/B081Q3THZN/ref=cm_sw_r_sms_c_api_i_fOJ2EbMWEA1GD
Hi do you have a link to the part you ordered on Amazon thx
Thank you! Ordering this now!
How long did yours last
Just order 1 for both sides or 2?
Just saw this video. Thanks bro.. I just got it
Send the Amazon link I can’t find it
Man, I have looked. I can’t find that strip.
@@squatos1969 the link is here below 👇
Just received mines in from Amazon about to attempt to fix my quarter window on my Camaro… I pray I actually fix it correctly lol
Make sure you leave enough space between the rear quarter window in the front window so water won’t get in.
Sir- I cannot find that rubber piece your talking about on Amazon. Do you by chance have items number
Here is the link if interested on amazon www.amazon.com/dp/B081Q3THZN/ref=cm_sw_r_sms_c_api_i_fOJ2EbMWEA1GD
Here is the link if interested on amazon www.amazon.com/dp/B081Q3THZN/ref=cm_sw_r_sms_c_api_i_fOJ2EbMWEA1GD
Here is the link if interested on amazon www.amazon.com/dp/B081Q3THZN/ref=cm_sw_r_sms_c_api_i_fOJ2EbMWEA1GD
Can u please send me the link where u found that strip I don’t see it please
Hi this is awesome! Thanks for the video. Which one did you get from amazon? I need it for my chevrolet camaro 2015 . Same issue with the window seal.
the black one 3 in by 37 in
www.amazon.com/dp/B081Q3THZN/ref=cm_sw_r_sms_c_api_i_fOJ2EbMWEA1GD
Just ordered mine thanks
Mine isn’t that thick it’s a skinny rubber piece and it literally comes off. What glue do I use??
The one I ordered comes an adhesive strip
Did u have to buy one of those or two?
Just one
just one is good for both windows
I still have mines , it just fell off. How do I just put it back on ?
You can use glue that is good for silicone. But eventually it will fall off after 12 months or so depending on the weather in ur area.
I see you uploaded this video 2 years ago. Hownhas the seal held up since? Is it easy to install?
It’s still doing fine no leaks
Anyone know what the seal is called to search on Amazon?
Did you put it on inside and out?
Outside of the quarter window
Can you make another video or show me how to actually install this device. I ordered it from the link you posted but I cannot get it to seal and stick like yours and also when I let the window down the seal will not go down with the window. Pls help
Honestly there’s a silicone part of the outside window trim that does brake/ bend with that seal window seal installation. But I’ve never had issues where the water goes in my car.
But about the installation try to do the installation at night when it’s not too hot because the adhesive on the window seal will not stick very well when it’s really hot in the day time. also when you are done don’t put the window down for at least 24 -48 hours. This should solve your problem.
Also in the beginning the window seal will not go up directly into the channel it’ll take some time before the window seal’s friction will be reduced. After that it’ll go straight into the channel and you won’t have an issue with it going up or down.
Hope this helps.
ua-cam.com/video/TiTH-8F54ZU/v-deo.html
Here is another video I made. It might help.
Hey man, how did this turn out? I have the same problem with my 13 vert. I replaced both sides cost me about $500, and i installed a 2014 window and the same exact thing happened. Either its a factory defect or the guy who put it together didnt use enough glue. Terrible manufacturers defect and GM wouldnt do a thing about it. Also I live in florida and it appears you do too, so I wonder if the humidity has something to do with it in the summer.
Yes I live in Florida, I replaced the strip in 2019 and it’s till works fine. I’m sure the humidity has a lot to do with it.
go to a glass place that replaces windshields and they glued mine for $25 and it has stayed for a year. Wish I had seen this video a week ago. I just ordered one for the drivers side. They have gone up to $450 each. I ordered a used one.
Can u show us how u got it installed please
Go to my channel I believe I have another video that shows a little bit better how it goes
@@miguelarreguin64
Thanks bro 😎
Thank you so much
Whats the name on amazon
I just did it to mine worked 💪
Nice! 🥂
Thank you soooo much👍🏽💙
I can’t find it in Amazon
Life saver
Please send link
Fkn genius!!! 🎉
Thank you!!!!
Here is the link if interested on amazon www.amazon.com/dp/B081Q3THZN/ref=cm_sw_r_sms_c_api_i_fOJ2EbMWEA1GD
What the actual name there are several
Your seal is likely inside the panel. Put your top half way down and look down inside the window crack. You might find it in there. That’s where mine was. Unless you had your windows up with the top down driving down the road. Chevy is raping people for this part making them buy a window they don’t need. What kind of crap glue did they use anyway? I’m furious about this! The current CEO of GM makes 30 Million a year and they can’t sell us just the seal? Shame on them!